[PATCH V2 0/2] Add device tree support of i2c Atmel driver

[Raphaël Poggi]

Hi,

I have tested it on a custom board which use a sam9m10 and it
worked... Tell me more when we have found something suspicious.

Thanks for your test.

Raphaël Poggi

2014-08-04 11:11 GMT+02:00 Bo Shen <voice.shen at atmel.com>:
> Hi Raphaël Poggi,
>   I try to manage to make the i2c driver work, however, failed for non
> device tree.
>   I am still checking it. However, some comments for the patches.
>
> Best Regards,
> Bo Shen
>
>
> On 08/04/2014 04:31 PM, Raphaël Poggi wrote:
>>
>> Change since v1:
>>          * Squash the commit [1] which adds the sam9x5 config.
>>
>> This patcheset adds the device tree support for i2c Atmel driver and the
>> corresping clocks
>> for the at91sam9g45 device.
>>
>> Raphaël Poggi (2) :
>>          (1) i2c: at91: add support of device tree
>>          (2) at91sam9g45: clock: add i2c clocks
>>
>> arch/arm/mach-at91/at91sam9g45.c |    4 +++
>> drivers/i2c/busses/i2c-at91.c    |   66
>> +++++++++++++++++++++++++++++++++-----
>> 2 files changed, 62 insertions(+), 8 deletions(-)
>>
>> [1]: http://lists.infradead.org/pipermail/barebox/2014-August/020493.html
>
>
> Best Regards,
> Bo Shen
>
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox