[PATCH V2 0/2] Add device tree support of i2c Atmel driver

Bo Shen voice.shen at atmel.com
Mon Aug 4 02:29:55 PDT 2014


Hi Raphaël Poggi,

On 08/04/2014 05:22 PM, Raphaël Poggi wrote:
> Hi,
>
> I have tested it on a custom board which use a sam9m10 and it
> worked... Tell me more when we have found something suspicious.

I tested on sama5d3xek with qt1070 connect to i2c, and the i2c host 
register successfully, however can not access qt1070, if I use i2c-gpio 
driver, it works well.

I am still working on it, if any news, I will let you know.

Best Regards,
Bo Shen

> Thanks for your test.
>
> Raphaël Poggi
>
> 2014-08-04 11:11 GMT+02:00 Bo Shen <voice.shen at atmel.com>:
>> Hi Raphaël Poggi,
>>    I try to manage to make the i2c driver work, however, failed for non
>> device tree.
>>    I am still checking it. However, some comments for the patches.
>>
>> Best Regards,
>> Bo Shen
>>
>>
>> On 08/04/2014 04:31 PM, Raphaël Poggi wrote:
>>>
>>> Change since v1:
>>>           * Squash the commit [1] which adds the sam9x5 config.
>>>
>>> This patcheset adds the device tree support for i2c Atmel driver and the
>>> corresping clocks
>>> for the at91sam9g45 device.
>>>
>>> Raphaël Poggi (2) :
>>>           (1) i2c: at91: add support of device tree
>>>           (2) at91sam9g45: clock: add i2c clocks
>>>
>>> arch/arm/mach-at91/at91sam9g45.c |    4 +++
>>> drivers/i2c/busses/i2c-at91.c    |   66
>>> +++++++++++++++++++++++++++++++++-----
>>> 2 files changed, 62 insertions(+), 8 deletions(-)
>>>
>>> [1]: http://lists.infradead.org/pipermail/barebox/2014-August/020493.html
>>
>>
>> Best Regards,
>> Bo Shen
>>
>>
>>
>> _______________________________________________
>> barebox mailing list
>> barebox at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>




More information about the barebox mailing list