[PATCH 2/4] AT91: move have_intensity_bit into board setup

[Darren Garnier]

On Sep 3, 2013, at 7:39 AM, Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com> wrote:

> On 22:22 Mon 02 Sep     , Darren Garnier wrote:
>> Signed-off-by: Darren Garnier <dgarnier at reinrag.net>
> \why this is soc specific

Yes, the option is probably soc specific, but in the 9261 soc, we actually have 2 cpus. Both the 9261 and 9g10.
One of the few differences between these pin compatible chips is the way the LCD peripheral is wired.

My board has 2 varieties out in the wild.. one with the 9261 and the other with the 9g10 and because of the
way they are wired, the "intensity bit" is only appropriate to the 9261 cpu board.  Since you can't change this setting easily after you pass it off
to at91_add_device_lcdc, it's important that it only be set in the board file.


> 
> Best Regards,
> J.
>> ---
>> arch/arm/boards/at91sam9261ek/init.c     | 2 ++
>> arch/arm/mach-at91/at91sam9261_devices.c | 2 --
>> 2 files changed, 2 insertions(+), 2 deletions(-)
>> 
>> diff --git a/arch/arm/boards/at91sam9261ek/init.c b/arch/arm/boards/at91sam9261ek/init.c
>> index 00fc745..b420a48 100644
>> --- a/arch/arm/boards/at91sam9261ek/init.c
>> +++ b/arch/arm/boards/at91sam9261ek/init.c
>> @@ -223,6 +223,8 @@ static void ek_add_device_lcdc(void)
>> 
>> 	if (machine_is_at91sam9g10ek())
>> 		ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB;
>> +	else
>> +		ek_lcdc_data.has_intensity_bit = true;
>> 
>> 	at91_add_device_lcdc(&ek_lcdc_data);
>> }
>> diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
>> index b522afb..ba52e56 100644
>> --- a/arch/arm/mach-at91/at91sam9261_devices.c
>> +++ b/arch/arm/mach-at91/at91sam9261_devices.c
>> @@ -218,8 +218,6 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_platform_data *data)
>> {
>> 	BUG_ON(!data);
>> 
>> -	data->have_intensity_bit = true;
>> -
>> #if defined(CONFIG_FB_ATMEL_STN)
>> 	at91_set_A_periph(AT91_PIN_PB0, 0);	/* LCDVSYNC */
>> 	at91_set_A_periph(AT91_PIN_PB1, 0);	/* LCDHSYNC */
>> -- 
>> 1.8.3.1
>> 
>> 
>> 
>> _______________________________________________
>> barebox mailing list
>> barebox at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox