Install barebox to target

[Eric Bénard]

Hi Thomas,

> 2011/3/8 Thomas Mayer<thomas.mayer at telemotive.de>:
>> according to the cpu datasheet  the bootloader has to store at offset
>> 0x400 (1KByte).
>> I tried to dd barebox that way  but it didn't work (command: "dd
>> if=barebox.bin of=/dev/sdb bs=512 seek=2&&  sync&&  sync").
>> I also tried to use the prebuild freescale redboot binary with mmc
>> support and this works.
>>
>> Have you any idea what I'm doing wrong?
>> Is it possible that a mmc binary need a special flash header to work
>> correctly?
>
check arch/arm/boards/eukrea_cpuimx35/flash_header.c
it works fine on our i.MX35 baord but I had to hack CPUIMX35_FLASH_HEADER_BASE 
to get it working.

Eric