Switching to 4.174.64.19 firmware for G-PHY cards?

[Rafał Miłecki]

W dniu 9 marca 2011 01:44 użytkownik chris at martin.cc <chris at martin.cc> napisał:
> 2011/3/9 Rafał Miłecki <zajec5 at gmail.com>
>>
>> W dniu 8 marca 2011 02:25 użytkownik chris at martin.cc <chris at martin.cc>
>> napisał:
>> >
>> > 2011/3/8 Rafał Miłecki <zajec5 at gmail.com>
>> >>
>> >> W dniu 4 marca 2011 01:37 użytkownik chris at martin.cc <chris at martin.cc>
>> >> napisał:
>> >> > Maybe the way to investigate this further is to look at what is being
>> >> > passed between
>> >> > mac80211 and b43, with the different firmwares.
>> >> >
>> >> > I will add some debugging on the weekend and see what I can uncover.
>> >>
>> >> Maybe it'd make sense to check what we get from hardware with older
>> >> vs. newer firmware?
>> >>
>> >> Attached patch was compile-tested only.
>> >>
>> >> It may put a lot of messages in your dmesg, don't try to run it for too
>> >> long ;)
>> >>
>
> I the just tested the patch
> Very curious..  I get nothing.
> I double checked that the patch was applied.
> I cleaned the object files, to ensure that it was compiled
> I ensured that CONFIG_B43_DEBUG was enabled
> But the lines are never called

With which firmware did you test?

-- 
Rafał