Switching to 4.174.64.19 firmware for G-PHY cards?

[chris at martin.cc]

2011/3/9 Rafał Miłecki <zajec5 at gmail.com>

> W dniu 8 marca 2011 02:25 użytkownik chris at martin.cc <chris at martin.cc>
> napisał:
> >
> > 2011/3/8 Rafał Miłecki <zajec5 at gmail.com>
> >>
> >> W dniu 4 marca 2011 01:37 użytkownik chris at martin.cc <chris at martin.cc>
> >> napisał:
> >> > Maybe the way to investigate this further is to look at what is being
> >> > passed between
> >> > mac80211 and b43, with the different firmwares.
> >> >
> >> > I will add some debugging on the weekend and see what I can uncover.
> >>
> >> Maybe it'd make sense to check what we get from hardware with older
> >> vs. newer firmware?
> >>
> >> Attached patch was compile-tested only.
> >>
> >> It may put a lot of messages in your dmesg, don't try to run it for too
> >> long ;)
> >>
>

I the just tested the patch
Very curious..  I get nothing.

I double checked that the patch was applied.
I cleaned the object files, to ensure that it was compiled
I ensured that CONFIG_B43_DEBUG was enabled

But the lines are never called

----------------------------------------------------------
Chris Martin
m: +61 419 812 371
----------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/b43-dev/attachments/20110309/be0cd511/attachment.html>