Switching to 4.174.64.19 firmware for G-PHY cards?

[chris at martin.cc]

2011/3/9 chris at martin.cc <chris at martin.cc>

> 2011/3/9 Rafał Miłecki <zajec5 at gmail.com>
>
> W dniu 8 marca 2011 02:25 użytkownik chris at martin.cc <chris at martin.cc>
>> napisał:
>> >
>> > 2011/3/8 Rafał Miłecki <zajec5 at gmail.com>
>> >>
>> >> W dniu 4 marca 2011 01:37 użytkownik chris at martin.cc <chris at martin.cc>
>> >> napisał:
>> >> > Maybe the way to investigate this further is to look at what is being
>> >> > passed between
>> >> > mac80211 and b43, with the different firmwares.
>> >> >
>> >> > I will add some debugging on the weekend and see what I can uncover.
>> >>
>> >> Maybe it'd make sense to check what we get from hardware with older
>> >> vs. newer firmware?
>> >>
>> >> Attached patch was compile-tested only.
>> >>
>> >> It may put a lot of messages in your dmesg, don't try to run it for too
>> >> long ;)
>> >>
>>
>
> I the just tested the patch
> Very curious..  I get nothing.
>
> I double checked that the patch was applied.
> I cleaned the object files, to ensure that it was compiled
> I ensured that CONFIG_B43_DEBUG was enabled
>
> But the lines are never called
>

I also tried both experimental and stable, with the same result
----------------------------------------------------------
Chris Martin
m: +61 419 812 371
----------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/b43-dev/attachments/20110309/c876d564/attachment.html>