ATH10K VLAN firmware issue

[Ben Greear]

This only happens when you use STA  + WDS, or is .1q broken
for you in other cases as well?

Thanks,
Ben

On 12/08/2015 06:29 AM, Cedric VONCKEN wrote:
> 	I'm testing to transmit frame with 802.1q tag (VLAN).
>
> 	My client is set in STA + WDS and the netdev is bridged with
> eth0.
> 	I have a computer with vlan configuration set connected to the
> STA eth0.
>
> 	If I try to transmit frames with 802.1q tag, the frames are not
> sent.
> 	I checked with wireless sniffer, and I don't see the frame with
> VLAN tag (the frames without VLAN tag are sent).
>
> 	I tested with firmware 10.2.4.70.14-2 from kale github,
> 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from openwrt,
> and in all cases I have the same issue.
>
> 	Thanks for your help.
>
> 	
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com