ATH10K VLAN firmware issue

[voncken]

> -----Message d'origine-----
> De : Ben Greear [mailto:greearb at candelatech.com]
> Envoyé : mercredi 9 décembre 2015 16:34
> À : Cedric VONCKEN; ath10k at lists.infradead.org; linux-wireless
> Objet : Re: ATH10K VLAN firmware issue
> 
> This only happens when you use STA  + WDS, or is .1q broken for you in
> other cases as well?

No, this issue occurs in all modes (STA, STA + WDS, AP).

Thanks

Cedric.

> 
> Thanks,
> Ben
> 
> On 12/08/2015 06:29 AM, Cedric VONCKEN wrote:
> > 	I'm testing to transmit frame with 802.1q tag (VLAN).
> >
> > 	My client is set in STA + WDS and the netdev is bridged with eth0.
> > 	I have a computer with vlan configuration set connected to the STA
> > eth0.
> >
> > 	If I try to transmit frames with 802.1q tag, the frames are not
sent.
> > 	I checked with wireless sniffer, and I don't see the frame with VLAN
> > tag (the frames without VLAN tag are sent).
> >
> > 	I tested with firmware 10.2.4.70.14-2 from kale github,
> > 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from
> > openwrt, and in all cases I have the same issue.
> >
> > 	Thanks for your help.
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe
> > linux-wireless" in the body of a message to majordomo at vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> 
> --
> Ben Greear <greearb at candelatech.com>
> Candela Technologies Inc  http://www.candelatech.com