[PATCH v4 2/2] ramips: add support for Wavlink WS-WN572HP3 4G
Arınç ÜNAL
arinc.unal at arinc9.com
Thu Dec 1 00:25:12 PST 2022
On 30.11.2022 23:35, Jan-Niklas Burfeind wrote:
> Wavlink WS-WN572HP3 4G is an 802.11ac
> dual-band outdoor router with LTE support.
>
> Specifications;
> * Soc: MT7621DAT
> * RAM: 128MiB
> * Flash: NOR 16MiB GD-25Q128ESIG3
> * Wi-Fi:
> * MT7613BEN: 5GHz
> * MT7603EN: 2.4GHz
> * Ethernet: 2x 1GbE
> * USB: None - only used internally
> * LTE Modem: Quectel EC200T-EU
> * UART: 115200 baud
> * LEDs:
> * 7 blue at the front
> * 1 Power
> * 2 LAN / WAN
> * 1 Status
> * 3 RSSI (annotated 4G)
> * 1 green at the bottom (4G LED)
> * Buttons: 1 reset button
>
> Installation:
> * press and hold the reset button while powering on the device
> * keep it pressed for ten seconds
> * connect to 192.168.10.1 via webbrowser (chromium/chrome works, at
> least Firefox 106.0.3 does not)
> * upload the sysupgrade image, confirm the checksum, wait 2 minutes
> until the device reboots
>
> Revert to stock firmware:
> * same as installation but use the recovery image for WL-WN572HP3
>
> Signed-off-by: Jan-Niklas Burfeind <git at aiyionpri.me>
Acked-by: Arınç ÜNAL <arinc.unal at arinc9.com>
Keep this if you send a new version.
Arınç
More information about the openwrt-devel
mailing list