August 2021 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Aug 1 00:00:50 PDT 2021
Ending: Tue Aug 31 23:34:00 PDT 2021
Messages: 264

• some issues in /etc/init.d/dnsmasq   e9hack
  • some issues in /etc/init.d/dnsmasq   Daniel Golle
• dnsmasq: rework jail mounts   e9hack
  • dnsmasq: rework jail mounts   Daniel Golle
• SSH/MTU Issues in OpenVPN tunnel on OpenWRT 21.02 RC3   Federico Capoano
• [sdwalker/sdwalker.github.io] 9e317a: This week's update   Stephen Walker
• [PATCH] kernel: set CONFIG_RCU_FANOUT=64 for 64bit targets   Rui Salvaterra
• [PATCH] fstools: libblkid-tiny: fix invalid open syscall return check   Daniel Danzberger
• [PATCH] fstools: libblkid-tiny: install header file to include dir   Daniel Danzberger
• [PATCH v6 1/3] mvebu: add support for iEi Puzzle-M901/Puzzle-M902   eveans2002 at gmail.com
  • [PATCH v6 1/3] mvebu: add support for iEi Puzzle-M901/Puzzle-M902   Adrian Schmutzler
• [PATCH v6 2/3] mvebu: add dts files for iEi Puzzle-M901/Puzzle-M902   eveans2002 at gmail.com
  • [PATCH v6 2/3] mvebu: add dts files for iEi Puzzle-M901/Puzzle-M902   Daniel Golle
• [PATCH v6 3/3] mvebu: backport CN9130 dts files changes to 5.4   eveans2002 at gmail.com
  • [PATCH v6 3/3] mvebu: backport CN9130 dts files changes to 5.4   Adrian Schmutzler
• [PATCH] base-files: sysupgrade: include configured dirs   Daniel Golle
• [PATCH] firmware-utils: replace GPL 2.0+ boilerplate/reference with SPDX   Rafał Miłecki
  • [PATCH] firmware-utils: replace GPL 2.0+ boilerplate/reference with SPDX   Rafał Miłecki
• [PATCH] firmware-utils: seama: replace BSD-3-Clause boilerplate with SPDX   Rafał Miłecki
• [PATCH] firmware-utils: tplink-safeloader: replace BSD-2-Clause boilerplate with SPDX   Rafał Miłecki
  • [PATCH] firmware-utils: tplink-safeloader: replace BSD-2-Clause boilerplate with SPDX   Matthias Schiffer
• [PATCH] firmware-utils: add GPL 2.0 SPDX to files with no license info   Rafał Miłecki
• [PATCH V2] firmware-utils: replace GPL 2.0 boilerplate/reference with SPDX   Rafał Miłecki
  • [PATCH V2] firmware-utils: replace GPL 2.0 boilerplate/reference with SPDX   Rafał Miłecki
    • [PATCH V2] firmware-utils: replace GPL 2.0 boilerplate/reference with SPDX   Linus Walleij
• OpenWrt 21.02.0 Fourth release candidate   Hauke Mehrtens
  • OpenWrt 21.02.0 Fourth release candidate   Rich Brown
    • OpenWrt 21.02.0 Fourth release candidate   Arınç ÜNAL
      • OpenWrt 21.02.0 Fourth release candidate   Rainer Dorsch
      • OpenWrt 21.02.0 Fourth release candidate   Hauke Mehrtens
      • OpenWrt 21.02.0 Fourth release candidate   Arınç ÜNAL
      • OpenWrt 21.02.0 Fourth release candidate   Federico Capoano
      • OpenWrt 21.02.0 Fourth release candidate   Adrian Schmutzler
      • OpenWrt 21.02.0 Fourth release candidate - DSA docs   Rich Brown
      • OpenWrt 21.02.0 Fourth release candidate - DSA docs   Arınç ÜNAL
• [PATCH] generic: Kconfig: exit on unset symbol   David Bauer
• [RFC PATCH] gpio-button-hotplug: gpio descriptor API update   Christian Lamparter
  • [RFC PATCH] gpio-button-hotplug: gpio descriptor API update   Linus Walleij
• [PATCH 1/5] firmware-utils: mkmerakifw-old: replace GPL-2.0-only boilerplate with SPDX   Rafał Miłecki
  • [PATCH 2/5] firmware-utils: mkmylofw: replace GPL-2.0-or-later boilerplate with SPDX   Rafał Miłecki
  • [PATCH 3/5] firmware-utils: osbridge-crc: replace GPL-2.0-only boilerplate with SPDX   Rafał Miłecki
  • [PATCH 4/5] firmware-utils: trx: replace GPL-2.0-or-later boilerplate with SPDX   Rafał Miłecki
  • [PATCH 5/5] firmware-utils: nand_ecc: replace GPL boilerplate with SPDX   Rafał Miłecki
  • [PATCH 1/5] firmware-utils: mkmerakifw-old: replace GPL-2.0-only boilerplate with SPDX   Christian Lamparter
    • [PATCH 1/5] firmware-utils: mkmerakifw-old: replace GPL-2.0-only boilerplate with SPDX   Rafał Miłecki
• [PATCH] firmware-utils: seama.h replace LGPL-2.1-or-later boilerplate with SPDX   Rafał Miłecki
  • [PATCH] firmware-utils: seama.h replace LGPL-2.1-or-later boilerplate with SPDX   Adrian Schmutzler
• [PATCH firmware-utils] xiaomifw: new tool for managing Xiaomi firmwares   Rafał Miłecki
• binutils: add gold linker support   Gérald Kerma
• [PATCH] base-files: add option to make /var persistent   Stijn Tintel
  • [PATCH] base-files: add option to make /var persistent   Alberto Bursi
    • [PATCH] base-files: add option to make /var persistent   Stijn Tintel
      • [PATCH] base-files: add option to make /var persistent   Alberto Bursi
      • [PATCH] base-files: add option to make /var persistent   Stijn Tintel
      • [PATCH] base-files: add option to make /var persistent   Bas Mevissen
      • [PATCH] base-files: add option to make /var persistent   Alberto Bursi
  • [PATCH] base-files: add option to make /var persistent   Adrian Schmutzler
• [PATCH] mvebu: cortexa9: remove wifi migration script   DENG Qingfang
  • [PATCH] mvebu: cortexa9: remove wifi migration script   Arınç ÜNAL
• OpenWrt 19.07.8 service release   Hauke Mehrtens
• [sdwalker/sdwalker.github.io] a71dce: This week's update   Stephen Walker
• mvebu: armada 3720 cpufreq reverts   Josef Schlehofer
  • mvebu: armada 3720 cpufreq reverts   Hauke Mehrtens
• [PATCH] prereq-build: require python3-distutils   Andre Heider
  • [PATCH] prereq-build: require python3-distutils   Andre Heider
    • [PATCH] prereq-build: require python3-distutils   Hauke Mehrtens
      • [PATCH] prereq-build: require python3-distutils   Andre Heider
      • [PATCH] prereq-build: require python3-distutils   Hauke Mehrtens
      • [PATCH] prereq-build: require python3-distutils   Sebastian Kemper
• [PATCH 21.02] ipq806x: backport cpufreq changes to 5.4   Shane Synan
  • [PATCH 21.02] ipq806x: backport cpufreq changes to 5.4   Shane Synan
• [PATCH] RFC: ARM: dts: Proposed Goramo MultiLink device tree   Linus Walleij
• [PATCH] target/x86: add grub2-bios-setup to DEFAULT_PACKAGES   Florian Eckert
• cgi-io: extend backup file name   F. D. Ansel
• [PATCH] ath79: add support for onion omega   Jan-Niklas Burfeind
  • [PATCH] ath79: add support for onion omega   David Bauer
    • [PATCH v2] ath79: add support for onion omega   Jan-Niklas Burfeind
      • [PATCH v2] ath79: add support for onion omega   David Bauer
      • [PATCH v2] ath79: add support for onion omega   Tomasz Maciej Nowak
      • [PATCH v2] ath79: add support for onion omega   Jan-Niklas Burfeind
      • [PATCH v2] ath79: add support for onion omega   Tomasz Maciej Nowak
      • [PATCH v2] ath79: add support for onion omega   Lech Perczak
      • [PATCH v2] ath79: add support for onion omega   Jan-Niklas Burfeind
      • [PATCH v2] ath79: add support for onion omega   Lech Perczak
      • [PATCH v2] ath79: add support for onion omega   openwrt at aiyionpri.me
      • [PATCH v2] ath79: add support for onion omega   Lech Perczak
      • [PATCH v2] ath79: add support for onion omega   Tomasz Maciej Nowak
      • [PATCH v2] ath79: add support for onion omega   Jan-Niklas Burfeind
• [PATCH] ethtool: fix recursive dependency   Eneas U de Queiroz
• [PATCH] treewide: add missing config symbols   Hannu Nyman
• [PATCH 0/2] ath79: split support for Ubiquiti PowerBeam M5 and M2   Russell Senior
  • [PATCH 1/2] ath79: rename Ubiquiti powerbeam-m to powerbeam-m5   Russell Senior
  • [PATCH 2/2] ath79: add support for Ubiquiti PowerBeam M2 (XW)   Russell Senior
  • [PATCH v2 0/2] ath79: split support for Ubiquiti PowerBeam M5 and M2   Russell Senior
    • [PATCH v2 1/2] ath79: rename Ubiquiti powerbeam-m to powerbeam-m5   Russell Senior
    • [PATCH v2 2/2] ath79: add support for Ubiquiti PowerBeam M2 (XW)   Russell Senior
• [PATCH v3] ath79: add support for onion omega   Jan-Niklas Burfeind
  • [PATCH v3] ath79: add support for onion omega   Adrian Schmutzler
    • [PATCH v3] ath79: add support for onion omega   Mike Bernardo
      • [PATCH v3] ath79: add support for onion omega   Lech Perczak
      • [PATCH v3] ath79: add support for onion omega   Mike Bernardo
• [PATCH 0/6] use binutils 2.36.1 and gcc 10 by default   Stijn Tintel
  • [PATCH 1/6] busybox: fix compilation with GCC 10   Stijn Tintel
  • [PATCH 2/6] umbim: fix compilation with GCC 10   Stijn Tintel
  • [PATCH 5/6] toolchain: drop GCC 9   Stijn Tintel
    • [PATCH 5/6] toolchain: drop GCC 9   Hauke Mehrtens
  • [PATCH 6/6] toolchain: drop binutils 2.35.1   Stijn Tintel
    • [PATCH 6/6] toolchain: drop binutils 2.35.1   Hauke Mehrtens
  • [PATCH 0/6] use binutils 2.36.1 and gcc 10 by default   Hauke Mehrtens
    • [PATCH 0/6] use binutils 2.36.1 and gcc 10 by default   Stijn Tintel
      • [PATCH 0/6] use binutils 2.36.1 and gcc 10 by default   Hauke Mehrtens
      • [PATCH 0/6] use binutils 2.36.1 and gcc 10 by default   Rui Salvaterra
• [PATCH 3/6] toolchain/binutils: switch to version 2.36.1 by default   Stijn Tintel
• [PATCH 4/6] toolchain/gcc: switch to version 10 by default   Stijn Tintel
• [sdwalker/sdwalker.github.io] 9da521: This week's update   Stephen Walker
• ath79 porting of NEtgear R6100   Enrico Mioso
  • ath79 porting of NEtgear R6100   Paul D
    • ath79 porting of NEtgear R6100   Enrico Mioso
      • ath79 porting of NEtgear R6100   Paul D
• [PATCH] ubus/lua: add support for custom timeout parameter on call   adrian.frances at netduma.com
• [PATCH] ubusd: fix disconnection when sending invalid fd   adrian.frances at netduma.com
• [PATCH] ramips: fix ethernet MAC address on Omega2   Michael Siegenthaler
• Guidance on creating man pages for procd utilities   Lucas Ramage
  • Guidance on creating man pages for procd utilities   Eric Luehrsen
  • Guidance on creating man pages for procd utilities   John Crispin
• [PATCH 1/4] target/imagebuilder: add depends target to show all package that gets installed   Florian Eckert
  • [PATCH 2/4] target/imagebuilder: change help text for image build   Florian Eckert
  • [PATCH 3/4] target/imagebuilder: update help text for manifest target   Florian Eckert
  • [PATCH 4/4] target/imagebuilder: add help text and rename whatdepends to package_whatdepens   Florian Eckert
• [PATCH] odhcp6c: add DNS RA option lifetime support   Asura Liu (asuliu)
• [PATCH] ltq-vdsl/ltq-vdsl-app: clean up configure args   Jan Hoffmann
• [RFC PATCH v2] gpio-button-hotplug: convert to gpio descriptor (gpiod_) API   Christian Lamparter
• [PATCH 0/8] at91: add support for sama5d2 icp, sama5d27 wlsom1 ek and sam9x60ek   Claudiu Beznea
  • [PATCH 6/8] at91: enable specific sam9x kernel config flags   Claudiu Beznea
    • [PATCH 6/8] at91: enable specific sam9x kernel config flags   Hauke Mehrtens
      • [PATCH 6/8] at91: enable specific sam9x kernel config flags   Claudiu.Beznea at microchip.com
  • [PATCH 7/8] at91: enable kernel config for sam9x60   Claudiu Beznea
  • [PATCH 8/8] at91: add support for sam9x60-ek board   Claudiu Beznea
    • [PATCH 8/8] at91: add support for sam9x60-ek board   Adrian Schmutzler
• [PATCH 1/8] at91: kernel: bump to 5.10   Claudiu Beznea
• [PATCH 2/8] at91: add support for sama5d2 icp board   Claudiu Beznea
  • [PATCH 2/8] at91: add support for sama5d2 icp board   Adrian Schmutzler
• [PATCH 3/8] at91: add support for sama5d27-wlsom1-ek board   Claudiu Beznea
• [PATCH 4/8] at91: use make kernel_menuconfig and save for sam9x kernel config   Claudiu Beznea
  • [PATCH 4/8] at91: use make kernel_menuconfig and save for sam9x kernel config   Hauke Mehrtens
    • [PATCH 4/8] at91: use make kernel_menuconfig and save for sam9x kernel config   Claudiu.Beznea at microchip.com
• [PATCH 5/8] at91: enable CONFIG_ARCH_AT91 and specific sam9x SoCs   Claudiu Beznea
• [PATCH] download: improve handling of invalid local files   Eneas U de Queiroz
• [PATCH] uhttpd: add config option for json_script   Stijn Tintel
  • [PATCH] uhttpd: add config option for json_script   Felix Fietkau
• [PATCH ubus] ubusd: log ACL init errors   Rafał Miłecki
  • [PATCH ubus] ubusd: log ACL init errors   Rafał Miłecki
  • [PATCH ubus] ubusd: log ACL init errors   John Crispin
• [PATCH] ltq-vdsl: add missing backslash   Jan Hoffmann
• [PATCH 0/6] qoriq: new target   Stijn Tintel
  • [PATCH 2/6] toolchain/gcc: use ELFv2 ABI on ppc64 with musl   Stijn Tintel
  • [PATCH 3/6] openssl: add ppc64 support   Stijn Tintel
    • [PATCH 3/6] openssl: add ppc64 support   Adrian Schmutzler
  • [PATCH 4/6] nettle: disable assembler on ppc64   Stijn Tintel
  • [PATCH 5/6] qoriq: new target   Stijn Tintel
    • [PATCH 5/6] qoriq: new target   Hauke Mehrtens
      • [PATCH 5/6] qoriq: new target   Stijn Tintel
      • [PATCH 5/6] qoriq: new target   Stijn Tintel
  • [PATCH 6/6] qoriq: add support for WatchGuard Firebox M300   Stijn Tintel
    • [PATCH 6/6] qoriq: add support for WatchGuard Firebox M300   Alberto Bursi
      • [PATCH 6/6] qoriq: add support for WatchGuard Firebox M300   Rui Salvaterra
      • [PATCH 6/6] qoriq: add support for WatchGuard Firebox M300   Stijn Tintel
      • [PATCH 6/6] qoriq: add support for WatchGuard Firebox M300   Alberto Bursi
    • [PATCH 6/6] qoriq: add support for WatchGuard Firebox M300   Adrian Schmutzler
      • [PATCH 6/6] qoriq: add support for WatchGuard Firebox M300   Stijn Tintel
      • [PATCH 6/6] qoriq: add support for WatchGuard Firebox M300   Alberto Bursi
      • [PATCH 6/6] qoriq: add support for WatchGuard Firebox M300   Adrian Schmutzler
    • [PATCH 6/6] qoriq: add support for WatchGuard Firebox M300   Adrian Schmutzler
      • [PATCH 6/6] qoriq: add support for WatchGuard Firebox M300   Stijn Tintel
      • [PATCH 6/6] qoriq: add support for WatchGuard Firebox M300   Stijn Tintel
  • [PATCH 0/6] qoriq: new target   Rui Salvaterra
• [PATCH 1/6] build: add e6500 CPU_TYPE   Stijn Tintel
• [PATCH] kernel: disable CONFIG_RCU_EXPERT and friends   Rui Salvaterra
  • [PATCH] kernel: disable CONFIG_RCU_EXPERT and friends   Hauke Mehrtens
    • [PATCH] kernel: disable CONFIG_RCU_EXPERT and friends   Rui Salvaterra
      • [PATCH] kernel: disable CONFIG_RCU_EXPERT and friends   Hauke Mehrtens
      • [PATCH] kernel: disable CONFIG_RCU_EXPERT and friends   Rui Salvaterra
• [PATCH 1/2] kernel: disable CONFIG_RCU_EXPERT and friends   Rui Salvaterra
  • [PATCH 2/2] kernel: move two symbols to the generic kconfigs   Rui Salvaterra
    • [PATCH 2/2] kernel: move two symbols to the generic kconfigs   Hauke Mehrtens
      • [PATCH 2/2] kernel: move two symbols to the generic kconfigs   Rui Salvaterra
  • [PATCH 1/2] kernel: disable CONFIG_RCU_EXPERT and friends   Hauke Mehrtens
• [PATCH v2 1/2] kernel: disable CONFIG_RCU_EXPERT and friends   Rui Salvaterra
• [PATCH v2 2/2] kernel: move two symbols to the generic kconfigs   Rui Salvaterra
• [sdwalker/sdwalker.github.io] 1340c6: This week's update   Stephen Walker
• [PATCH v9 1/2] dnsmasq: Update to version 2.86test7   Etan Kissling
  • [PATCH v9 2/2] dnsmasq: add config option for connmark DNS filtering   Etan Kissling
  • [PATCH v10 1/2] dnsmasq: Update to version 2.86rc1   Etan Kissling
    • [PATCH v10 2/2] dnsmasq: add config option for connmark DNS filtering   Etan Kissling
    • [PATCH v11 1/2] dnsmasq: Update to version 2.86rc2   Etan Kissling
      • [PATCH v11 2/2] dnsmasq: add config option for connmark DNS filtering   Etan Kissling
• bug in base-files: add option to make /var persistent ?   e9hack
  • bug in base-files: add option to make /var persistent ?   Stijn Tintel
• [PATCH v4] ath79: add support for onion omega   Jan-Niklas Burfeind
  • [PATCH v4] ath79: add support for onion omega   Jan-Niklas Burfeind
• Kernel 5.10: Current targets' state   Adrian Schmutzler
• starting point for SOF_TIMESTAMPING_TX_SOFTWARE in bridges   Paul D
• [PATCH] openssl: bump to 1.1.1l   Eneas U de Queiroz
• [PATCH 21.02] openssl: bump to 1.1.1l   Eneas U de Queiroz
• [PATCH 19.07 1/2] openssl: use --cross-compile-prefix in Configure   Eneas U de Queiroz
  • [PATCH 19.07 2/2] openssl: bump to 1.1.1l   Eneas U de Queiroz
• [PATCH 0/2] TP-Link safeloader custom soft-version support   Sander Vanheule
  • [PATCH 1/2] firmware-utils: tplink-safeloader: improve soft-version customisation   Sander Vanheule
  • [PATCH 2/2] firmware-utils: tplink-safeloader: set EAP235-Wall v1 soft-version   Sander Vanheule
    • [PATCH 2/2] firmware-utils: tplink-safeloader: set EAP235-Wall v1 soft-version   Sander Vanheule
  • [PATCH 0/2] TP-Link safeloader custom soft-version support   Henrique de Moraes Holschuh
    • [PATCH 0/2] TP-Link safeloader custom soft-version support   Sander Vanheule
• [PATCH] ubus/lua: add fd sending to ubus requests   nicola.pancheri at netduma.com
• [PATCH] ubus/lua: fix stack leak   nicola.pancheri at netduma.com
• [PATCH] ubus/lua: pass event type as a parameter   manuel.tabares at netduma.com
• [PATCH] mediatek: add support for TOTOLINK A8000RU   Chuanhong Guo
  • [PATCH] mediatek: add support for TOTOLINK A8000RU   Daniel Golle
• OpenWrt 21.02 status   Hauke Mehrtens
  • OpenWrt 21.02 status   Hannu Nyman
    • OpenWrt 21.02 status   Rich Brown
    • OpenWrt 21.02 status   Rui Salvaterra
  • OpenWrt 21.02 status   Adrian Schmutzler
    • OpenWrt 21.02 status   Nick
  • OpenWrt 21.02 status   Stijn Segers
  • OpenWrt 21.02 status   Hauke Mehrtens
  • OpenWrt 21.02 status   Alexander E. Patrakov
    • OpenWrt 21.02 status   Hauke Mehrtens
      • OpenWrt 21.02 status   Alexander E. Patrakov
      • OpenWrt 21.02 status   Andy Botting
• Compilation problem with initramfs lzo compression   Ansuel Smith
• edgerouter-x DSA switch does not forward bridge-in-bridge packets correctly   Fabian Bläse
  • edgerouter-x DSA switch does not forward bridge-in-bridge packets correctly   Fabian Bläse
    • edgerouter-x DSA switch does not forward bridge-in-bridge packets correctly   Fabian Bläse
  • edgerouter-x DSA switch does not forward bridge-in-bridge packets correctly   Michael Richardson
    • edgerouter-x DSA switch does not forward bridge-in-bridge packets correctly   Fabian Bläse
• [sdwalker/sdwalker.github.io] 812dd4: This week's update   Stephen Walker
• [PATCH] kernel: Set CONFIG_RCU_CPU_STALL_TIMEOUT=21   Hauke Mehrtens
  • [PATCH] kernel: Set CONFIG_RCU_CPU_STALL_TIMEOUT=21   Rui Salvaterra
• OpenWrt 21.02: backport lantiq xrx200 DSA switch   Hauke Mehrtens
• [PATCH v7 1/2] mvebu: backport CN9130 dts necessary files changes to 5.4   eveans2002 at gmail.com
• [PATCH v7 2/2] mvebu: add support for iEi Puzzle-M901/Puzzle-M902   eveans2002 at gmail.com
  • [PATCH v7 2/2] mvebu: add support for iEi Puzzle-M901/Puzzle-M902   Daniel Golle
• [PATCH v3 0/6] at91: add support for sama5d2 icp, sama5d27 wlsom1 ek and sam9x60ek   Claudiu Beznea
  • [PATCH v3 1/6] at91: kernel: bump to 5.10   Claudiu Beznea
  • [PATCH v3 2/6] at91: enable specific sam9x kernel config flags   Claudiu Beznea
  • [PATCH v3 3/6] at91: add support for sama5d2 icp board   Claudiu Beznea
  • [PATCH v3 4/6] at91: add support for sama5d27-wlsom1-ek board   Claudiu Beznea
  • [PATCH v3 5/6] at91: enable kernel config for sam9x60   Claudiu Beznea
  • [PATCH v3 6/6] at91: add support for sam9x60-ek board   Claudiu Beznea
• bugs.openwrt.org: please help with my user   Sebastian Kemper
  • bugs.openwrt.org: please help with my user   Sebastian Kemper
• [PATCH] trace: fix potential use-after-free occurence   vincent at systemli.org
• GPIO mapping on Onion Omega2+ (MT7688)   Mike Bernardo
  • GPIO mapping on Onion Omega2+ (MT7688)   John Thomson
• [patch] elfutils: enable host build   Lucian Cristian
• [PATCH] Revert "initd: fix off-by-one error in mkdev.c"   vincent at systemli.org
  • [PATCH] Revert "initd: fix off-by-one error in mkdev.c"   Felix Fietkau
    • [PATCH] Revert "initd: fix off-by-one error in mkdev.c"   Nick
      • [PATCH] Revert "initd: fix off-by-one error in mkdev.c"   Daniel Golle
• [PATCH 1/2] Revert "initd: fix off-by-one error in mkdev.c"   vincent at systemli.org
  • [PATCH 2/2] initd: fix off-by-one error in mkdev.c   vincent at systemli.org
• [PATCH v2] ubusd: fix disconnection when sending invalid fd   adrian.frances at netduma.com
• [PATCH] ubus/lua: avoid changing key type to string   adrian.frances at netduma.com
• [PATCH] libopkg: support https_proxy   Vladislav Grigoryev

Last message date: Tue Aug 31 23:34:00 PDT 2021
Archived on: Wed May 29 14:32:09 PDT 2024

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...