[OpenWrt-Devel] GPL Violation to chase + Engenius/Senao firmware non-update

[Chuanhong Guo]

GPL doesn't prevent the manufacturer from blocking third-party
firmware being installed on their router.
They just need to provide GPL code for their firmware (and they don't
need to explicitly submit their device support to OpenWrt project.)
BTW: It seemed that the bootrom of Qualcomm IPQ40xx comes from other
Qualcomm Android chips and contains some security features that
preventing unauthorized firmware to be installed on their router. An
RSA pubkey can be burnt in to SoC and SoC bootrom will verify contents
on flash before booting it. If this feature is used by the
manufacturer you'll be impossible to flash any third-party firmware on
this router.
Michael Holstein <moholstein at gmail.com> 于2018年8月20日周一 下午9:41写道：
>
> I was finally frustrated at these Engenus/Saneo units and found the
> serial port and got into uBoot and looked at the image .. it's yours
> .. but oddly, you don't support it all.
>
> Well gee, that's curious, it seems somebody's breaking the rules, and
> it isn't you.
>
> I'd nastygram Engenius and make them post the GPL contrib so you have
> the BLOB for the Broacdom IPQ4019 that's in there. This is the
> EAP1250/1300 (identical except for where RJ45 port is) .. there are
> 100 others that use this board (I ran the board ID through the FCC API
> if you want all the makes/models).
>
> Here's your goods let me know if you want anything else .. I'm going
> to build the image for it and flash but since they broke the rules to
> begin with I'm dumping the flash and using the FDT to help modernize.
>
> These are cool because they are dual radio soft APs that are PoE and
> AC wave 2. A 3 pack is $160 on Amazon. With OpenWISP you can do most
> anything shy of a college campus
>
> ahywho ..here's all the proof you need. They didn't even bother to
> change the name.
>
> I'm not a contributor I just do lots of embedded work and this made me
> mad. Note that the you've already noticed this on the Engenius 300
> (the wiki poings out the factory firmware is openwrt)
>
> Company contact/owner is easiest found via their FCC filings : most
> recent one from
> company president
>
> https://fccid.io/A8J-EAP1300/Letter/Confidentiality-Request-3409208
>
> Cheers,
>
> -Michael.
>
> PS: It looks like they locked the UART from which I obtained this in
> u-boot from allowing interrupt so I'm going to poke about and find out
> how to get in there. I know this can be done  but it's first I've seen
> it done .. The uBoot is reworked from Saneo, per the version string.
>
> Anyone have a clever tip on that work-around? .. If I can get console
> at u-Boot I can skip a couple steps.
>
> ---snip---.
>
> bootm 0x84000000#configÉ4
>
> ## Booting kernel from FIT Image at 84000000 ...
>    Using 'configÉ4' configuration
>    Trying 'kernelÉ1' kernel subimage
>      Description:  ARM OpenWrt Linux-3.14.43 <<<<<<<< LOL OKAY COUGH IT UP
>      Type:         Kernel Image
>      Compression:  gzip compressed
>      Data Start:   0x840000e4
>      Data Size:    3180186 Bytes = 3 MiB
>      Architecture: ARM
>      OS:  t        Linux
>      Load Address: 0x80208000
>      Entry Point:  0x80208000
>      Hash algo:    crc32
>      Hash value:   34c16a99
>      Hash algo:    sha1
>      Hash value:   620a666c88729f60ee5b3f90fa261ed2bb3de6cb
>    Verifying Hash Integrity ... crc32+ sha1+ OK
>
> ## Flattened Device Tree from FIT Image at 84000000
>    Using 'configÉ4' configuration
>    Trying 'fdtÉ4' FDT blob subimage
>      Description:  ARM OpenWrt qcom-ipq40xx-ap.dkxx device tree blob
>      Type:         Flat Device Tree
>      Compression:  uncompressed
>      Data Start:   0x84325520
>      Data Size:    33495 Bytes = 32.7 KiB
>      Architecture: ARM
>      Hash algo:    crc32
>      Hash value:   19be728a
>      Hash algo:    sha1
>      Hash value:   633f6dbf948179ecf1f72f737981d2b38fabe6ee
>    Verifying Hash Integrity ... crc32+ sha1+ OK
>    Booting using the fdt blob at 0x84325520
>    Uncompressing Kernel Image ... OK
>
>    Loading Device Tree to 86ff4000, end 86fff2d6 ...
>
> And guilty party :
>
> Linux version 3.14.43 (root at liwei) (gcc version 4.8.3 20140106
> (prerelease) (Linaro GCC 4.8-2014.01) ) #1 SMP PREEMPT Tue Jan 30
> 18:20:10 CST 2018
>
> [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
>
> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
> instruction cache
>
> [    0.000000] Machine model: Qualcomm Technologies, Inc. IPQ40xx/EAP1250
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel