[OpenWrt-Devel] GPL Violation to chase + Engenius/Senao firmware non-update
Michael Holstein
moholstein at gmail.com
Mon Aug 20 09:40:50 EDT 2018
I was finally frustrated at these Engenus/Saneo units and found the
serial port and got into uBoot and looked at the image .. it's yours
.. but oddly, you don't support it all.
Well gee, that's curious, it seems somebody's breaking the rules, and
it isn't you.
I'd nastygram Engenius and make them post the GPL contrib so you have
the BLOB for the Broacdom IPQ4019 that's in there. This is the
EAP1250/1300 (identical except for where RJ45 port is) .. there are
100 others that use this board (I ran the board ID through the FCC API
if you want all the makes/models).
Here's your goods let me know if you want anything else .. I'm going
to build the image for it and flash but since they broke the rules to
begin with I'm dumping the flash and using the FDT to help modernize.
These are cool because they are dual radio soft APs that are PoE and
AC wave 2. A 3 pack is $160 on Amazon. With OpenWISP you can do most
anything shy of a college campus
ahywho ..here's all the proof you need. They didn't even bother to
change the name.
I'm not a contributor I just do lots of embedded work and this made me
mad. Note that the you've already noticed this on the Engenius 300
(the wiki poings out the factory firmware is openwrt)
Company contact/owner is easiest found via their FCC filings : most
recent one from
company president
https://fccid.io/A8J-EAP1300/Letter/Confidentiality-Request-3409208
Cheers,
-Michael.
PS: It looks like they locked the UART from which I obtained this in
u-boot from allowing interrupt so I'm going to poke about and find out
how to get in there. I know this can be done but it's first I've seen
it done .. The uBoot is reworked from Saneo, per the version string.
Anyone have a clever tip on that work-around? .. If I can get console
at u-Boot I can skip a couple steps.
---snip---.
bootm 0x84000000#configÉ4
## Booting kernel from FIT Image at 84000000 ...
Using 'configÉ4' configuration
Trying 'kernelÉ1' kernel subimage
Description: ARM OpenWrt Linux-3.14.43 <<<<<<<< LOL OKAY COUGH IT UP
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x840000e4
Data Size: 3180186 Bytes = 3 MiB
Architecture: ARM
OS: t Linux
Load Address: 0x80208000
Entry Point: 0x80208000
Hash algo: crc32
Hash value: 34c16a99
Hash algo: sha1
Hash value: 620a666c88729f60ee5b3f90fa261ed2bb3de6cb
Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 84000000
Using 'configÉ4' configuration
Trying 'fdtÉ4' FDT blob subimage
Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x84325520
Data Size: 33495 Bytes = 32.7 KiB
Architecture: ARM
Hash algo: crc32
Hash value: 19be728a
Hash algo: sha1
Hash value: 633f6dbf948179ecf1f72f737981d2b38fabe6ee
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x84325520
Uncompressing Kernel Image ... OK
Loading Device Tree to 86ff4000, end 86fff2d6 ...
And guilty party :
Linux version 3.14.43 (root at liwei) (gcc version 4.8.3 20140106
(prerelease) (Linaro GCC 4.8-2014.01) ) #1 SMP PREEMPT Tue Jan 30
18:20:10 CST 2018
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine model: Qualcomm Technologies, Inc. IPQ40xx/EAP1250
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list