Radius: Acct-Session-Id missing from Interim-Updates?

[Niels Peen]

Hi Nikos,

I noticed ocserv 0.11.6 includes an Acct-Session-Id with the Start packet, but not with the Interim-Update packets. Is this the correct behaviour? If so, is it possible to (optionally) add the Acct-Session-Id to all accounting packets? 

(If I understand RFC2866 correctly the Acct-Session-Id is required for all accounting requests.)

Thanks,
Niels

(47) Received Accounting-Request Id 33 from XYZ:6183 to ABC:1813 length 222
(47)   Acct-Status-Type = Start
(47)   Connect-Info = “someclient"
(47)   NAS-Identifier = “XYZ"
(47)   NAS-IP-Address = ABC
(47)   User-Name = "niels"
(47)   Service-Type = Framed-User
(47)   Framed-Protocol = PPP
(47)   Calling-Station-Id = “DEF"
(47)   Acct-Session-Id = "54K6X16YQ+62vq0RNBYGavKuiR5nKlQi/tvqte5wl3g="
(47)   Acct-Authentic = RADIUS
(47)   NAS-Port = 18632
(47)   Acct-Delay-Time = 0


(48) Received Accounting-Request Id 185 from XYZ:53953 to ABC:1813 length 131
(48)   Acct-Status-Type = Interim-Update
(48)   NAS-Identifier = “XYZ"
(48)   NAS-IP-Address = ABC
(48)   User-Name = "niels"
(48)   Service-Type = Framed-User
(48)   Framed-Protocol = PPP
(48)   Framed-IP-Address = 10.252.244.110
(48)   Acct-Input-Octets = 0
(48)   Acct-Output-Octets = 0
(48)   Acct-Input-Gigawords = 0
(48)   Acct-Output-Gigawords = 0
(48)   NAS-Port = 18636
(48)   Acct-Delay-Time = 0