March 2016 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Mar 1 01:13:01 PST 2016
Ending: Thu Mar 31 19:05:35 PDT 2016
Messages: 139

• [PATCH] pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsing   Phil Elwell
• [PATCH 1/2] clk: bcm2835: expose raw clock-registers via debugfs   Martin Sperl
• [PATCH 1/2] clk: bcm2835: expose raw clock-registers via debugfs   Eric Anholt
• [PATCH 44/50] pinctrl: rockchip: Use devm_pinctrl_register() for pinctrl registration   Heiko Stübner
• [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.   Vinod Koul
• [PATCH] pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsing   Stephen Warren
• [PATCH 1/5] ARM: bcm2835: Define standard pinctrl groups in the gpio node.   Stephen Warren
• [PATCH 2/5] ARM: bcm2835: Replace alt0/i2s_alt[02] with standard groups.   Stephen Warren
• [PATCH 1/4] dt-bindings: Add binding for brcm,bcm2835-sdhost.   Rob Herring
• [PATCH 1/5] ARM: bcm2835: Define standard pinctrl groups in the gpio node.   Eric Anholt
• [PATCH 2/5] ARM: bcm2835: Replace alt0/i2s_alt[02] with standard groups.   Eric Anholt
• [PATCH 1/5] ARM: bcm2835: Define standard pinctrl groups in the gpio node.   Stephen Warren
• [PATCH 2/5] ARM: bcm2835: Replace alt0/i2s_alt[02] with standard groups.   Stephen Warren
• [PATCH 1/5] ARM: bcm2835: Define standard pinctrl groups in the gpio node.   Martin Sperl
• [PATCH 1/2] dt-bindings: Add root properties for Raspberry Pi 3   Eric Anholt
• [PATCH 2/2] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Eric Anholt
• [PATCH 2/2] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Mark Rutland
• [PATCH 2/2] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Eric Anholt
• [PATCH 2/2] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Mark Rutland
• [PATCH 2/2] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Eric Anholt
• [PATCH 0/3] ARM: bcm2835: Include VC4 GPU in the DT   Eric Anholt
• [PATCH 1/3] dt-bindings: Add binding docs for V3D.   Eric Anholt
• [PATCH 2/3] drm/vc4: Recognize a more specific compatible string for V3D.   Eric Anholt
• [PATCH 3/3] ARM: bcm2835: Add VC4 to the device tree.   Eric Anholt
• [PATCH v3 00/11] dmaengine: bcm2835: bugfix + enhancement of driver   kernel at martin.sperl.org
• [PATCH v3 01/11] dmaengine: bcm2835: set residue_granularity field   kernel at martin.sperl.org
• [PATCH v3 02/11] dmaengine: bcm2835: remove unnecessary masking of dma channels   kernel at martin.sperl.org
• [PATCH v3 03/11] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.   kernel at martin.sperl.org
• [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties   kernel at martin.sperl.org
• [PATCH v3 05/11] dmaengine: bcm2835: add additional defines for DMA-registers   kernel at martin.sperl.org
• [PATCH v3 06/11] dmaengine: bcm2835: move cyclic member from bcm2835_chan into bcm2835_desc   kernel at martin.sperl.org
• [PATCH v3 07/11] dmaengine: bcm2835: move controlblock chain generation into separate method   kernel at martin.sperl.org
• [PATCH v3 08/11] dmaengine: bcm2835: limit max length based on channel type   kernel at martin.sperl.org
• [PATCH v3 09/11] dmaengine: bcm2835: add slave_sg support to bcm2835-dma   kernel at martin.sperl.org
• [PATCH v3 10/11] dmaengine: bcm2835: add dma_memcopy support to bcm2835-dma   kernel at martin.sperl.org
• [PATCH v3 11/11] dmaengine: bcm2835: expose dma registers via debugfs   kernel at martin.sperl.org
• [PATCH 1/5] dt/bindings: bcm2835: correct description for DMA-int   kernel at martin.sperl.org
• [PATCH 2/5] ARM: bcm2835: add defines for each interrupt   kernel at martin.sperl.org
• [PATCH 3/5] ARM: bcm2835: use defined INT names instead of magic numbers   kernel at martin.sperl.org
• [PATCH 4/5] ARM: bcm2835: add defines for each DREQ   kernel at martin.sperl.org
• [PATCH 5/5] ARM: bcm2835: use defined DMA_DREQ names instead of magic numbers   kernel at martin.sperl.org
• DMA support for UART on RPI   Stefan Wahren
• DMA support for UART on RPI   Martin Sperl
• [PATCH v7] clk: bcm2835: Add support for programming the audio domain clocks   Martin Sperl
• [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties   Eric Anholt
• [PATCH 2/2] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Stephen Warren
• [PATCH 3/3] ARM: bcm2835: Add VC4 to the device tree.   Stephen Warren
• [PATCH] pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsing   Linus Walleij
• [PATCH 2/5] ARM: bcm2835: Replace alt0/i2s_alt[02] with standard groups.   Linus Walleij
• [PATCH 5/5] ARM: bcm2835: Move most RPi default pin groups to their devices.   Linus Walleij
• [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties   Martin Sperl
• [PATCH 2/5] ARM: bcm2835: Replace alt0/i2s_alt[02] with standard groups.   Stephen Warren
• [PATCH 3/3] ARM: bcm2835: Add VC4 to the device tree.   Eric Anholt
• [PATCH 3/3] ARM: bcm2835: Add VC4 to the device tree.   Stephen Warren
• [PATCH 00/50] pinctrl: Add and use devm_ apis for pinctrl_{register, unregister}   Laxman Dewangan
• [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties   Mark Rutland
• [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties   Vinod Koul
• [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties   Martin Sperl
• [PATCH 00/50] pinctrl: Add and use devm_ apis for pinctrl_{register, unregister}   Linus Walleij
• [PATCH 00/50] pinctrl: Add and use devm_ apis for pinctrl_{register, unregister}   Laxman Dewangan
• [PATCH 1/5] dt/bindings: bcm2835: correct description for DMA-int   Rob Herring
• [PATCH 00/50] pinctrl: Add and use devm_ apis for pinctrl_{register, unregister}   Linus Walleij
• [PATCH 0/8 v4] bcm2835 DMA slave support   Eric Anholt
• [PATCH 1/8] dmaengine: bcm2835: set residue_granularity field   Eric Anholt
• [PATCH 2/8] dmaengine: bcm2835: remove unnecessary masking of dma channels   Eric Anholt
• [PATCH 3/8] dmaengine: bcm2835: add additional defines for DMA-registers   Eric Anholt
• [PATCH 4/8] dmaengine: bcm2835: move cyclic member from bcm2835_chan into bcm2835_desc   Eric Anholt
• [PATCH 5/8] dmaengine: bcm2835: move controlblock chain generation into separate method   Eric Anholt
• [PATCH 6/8] dmaengine: bcm2835: limit max length based on channel type   Eric Anholt
• [PATCH 7/8] dmaengine: bcm2835: add slave_sg support to bcm2835-dma   Eric Anholt
• [PATCH 8/8] dmaengine: bcm2835: add dma_memcopy support to bcm2835-dma   Eric Anholt
• [PATCH 0/8 v4] bcm2835 DMA slave support   Martin Sperl
• [PATCH 1/2] dt-bindings: Add root properties for Raspberry Pi 3   Rob Herring
• [PATCH 1/3] dt-bindings: Add binding docs for V3D.   Rob Herring
• [PATCH 0/8 v4] bcm2835 DMA slave support   Martin Sperl
• [PATCH 0/3] dmaengine: bcm2835: support dma channel 11 to 14   kernel at martin.sperl.org
• [PATCH 1/3] dt/bindings: bcm2835: add interrupt-names property   kernel at martin.sperl.org
• [PATCH 2/3] dmaengine: bcm2835: use platform_get_irq_byname   kernel at martin.sperl.org
• [PATCH 3/3] ARM: bcm2835: add interrupt-names and apply correct mapping   kernel at martin.sperl.org
• [PATCH 2/8] clk: bcm2835: add missing PLL clock divider   Eric Anholt
• [PATCH 3/8] clk: bcm2835: add missing osc and per clocks   Eric Anholt
• [PATCH 3/8] clk: bcm2835: add missing osc and per clocks   Eric Anholt
• [PATCH 5/8] clk: bcm2835: add the dsi clocks   Eric Anholt
• [PATCH 2/8] clk: bcm2835: add missing PLL clock divider   Martin Sperl
• [PATCH 3/6] clk: bcm2835: enable clocks that have been enabled by firmware   Eric Anholt
• [PATCH 2/8] clk: bcm2835: add missing PLL clock divider   Eric Anholt
• [PATCH 3/6] clk: bcm2835: enable clocks that have been enabled by firmware   Martin Sperl
• [PATCH 3/6] clk: bcm2835: enable clocks that have been enabled by firmware   Eric Anholt
• [GIT PULL] bcm2835 clk changes for 4.6 maybe   Eric Anholt
• [PATCH 0/5] drm/vc4: DPI panel support   Eric Anholt
• [PATCH 1/5] of: Add vendor prefix for On Tat Industrial Company.   Eric Anholt
• [PATCH 2/5] panel-simple: Add the 7" DPI panel from Adafruit.   Eric Anholt
• [PATCH 3/5] drm: Add an encoder and connector type enum for DPI.   Eric Anholt
• [PATCH 4/5] drm/vc4: Add DPI driver   Eric Anholt
• [PATCH 5/5] ARM: bcm2835: Add the DPI hardware to the device tree.   Eric Anholt
• [PATCH 1/3] dt/bindings: bcm2835: add interrupt-names property   Rob Herring
• [PATCH 1/5] of: Add vendor prefix for On Tat Industrial Company.   Rob Herring
• [PATCH 2/5] panel-simple: Add the 7" DPI panel from Adafruit.   Rob Herring
• [PATCH 4/5] drm/vc4: Add DPI driver   Rob Herring
• [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties   Martin Sperl
• [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties   Mark Rutland
• RPi3 arm64 port status   Eric Anholt
• RPi3 arm64 port status   Eric Anholt
• RPi3 arm64 port status   Stephen Warren
• RPi3 arm64 port status   Eric Anholt
• [PATCH 4/5] drm/vc4: Add DPI driver   Eric Anholt
• [PATCH 0/5 v2] drm/vc4: DPI panel support   Eric Anholt
• [PATCH 1/5] of: Add vendor prefix for On Tat Industrial Company.   Eric Anholt
• [PATCH 2/5] panel-simple: Add the 7" DPI panel from Adafruit.   Eric Anholt
• [PATCH 3/5] drm: Add an encoder and connector type enum for DPI.   Eric Anholt
• [PATCH 4/5] drm/vc4: Add DPI driver   Eric Anholt
• [PATCH 5/5] ARM: bcm2835: Add the DPI hardware to the device tree.   Eric Anholt
• [PATCH 4/5] drm/vc4: Add DPI driver   Rob Herring
• Your ticket order #00290923 approved   America Airlines
• [PATCH] pinctrl: bcm2835: Implement get_direction callback   Stefan Wahren
• [PATCH] ARM: bcm2835: add CPU node for ARM core   Stefan Wahren
• [PATCH] pinctrl: bcm2835: Implement get_direction callback   Eric Anholt
• [PATCH] ARM: bcm2835: add CPU node for ARM core   Eric Anholt
• [PATCH 3/5] drm: Add an encoder and connector type enum for DPI.   Daniel Vetter
• [PATCH] ARM: bcm2835: add CPU node for ARM core   Mark Rutland
• [PATCH] ARM: bcm2835: add CPU node for ARM core   Stefan Wahren
• [PATCH] ARM: bcm2835: add CPU node for ARM core   Mark Rutland
• [GIT PULL] bcm2835 clk changes for 4.6 maybe   Stephen Boyd
• [GIT PULL] bcm2835 clk changes for 4.6 maybe   Eric Anholt
• [PATCH] pinctrl: bcm2835: Implement get_direction callback   Stephen Warren
• [PATCH] ARM: bcm2835: add CPU node for ARM core   Stephen Warren
• [PATCH V2] ARM: bcm2835: add CPU node for ARM core   Stefan Wahren
• [PATCH 1/3] ARM: multi_v7_defconfig: Add more BCM2835 support   Eric Anholt
• [PATCH 2/3] ARM: multi_v7_defconfig: Switch BCM2835 to sdhci-iproc.c for MMC   Eric Anholt
• [PATCH 3/3] ARM: multi_v7_defconfig: Build in DWC2 USB support   Eric Anholt
• [PATCH 1/4] ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC   Eric Anholt
• [PATCH 2/4] ARM: bcm2835: Enable CONFIG_PM.   Eric Anholt
• [PATCH 3/4] ARM: bcm2835: Enable the VC4 graphics driver in the defconfig   Eric Anholt
• [PATCH 4/4] ARM: bcm2835: Enable NFS root support.   Eric Anholt
• [PATCH V2] ARM: bcm2835: add CPU node for ARM core   Eric Anholt
• [PATCH 2/3] ARM: multi_v7_defconfig: Switch BCM2835 to sdhci-iproc.c for MMC   Stephen Warren
• [PATCH 3/4] ARM: bcm2835: Enable the VC4 graphics driver in the defconfig   Stephen Warren
• [PATCH 1/3] ARM: multi_v7_defconfig: Add more BCM2835 support   Stephen Warren
• [PATCH 2/4] ARM: bcm2835: Enable CONFIG_PM.   Stephen Warren

Last message date: Thu Mar 31 19:05:35 PDT 2016
Archived on: Fri Apr 1 12:48:11 PDT 2016

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...