[PATCH 9/9] arm64: dts: rockchip: rk3588s-nanopi-m6: rename pcie2 power rail

[Joachim Eastwood via B4 Relay]

From: Joachim Eastwood <joachim.eastwood at gmail.com>

vcc3v3_pcie matches the signal name in the schematics, which simplifies
cross-referencing.

Signed-off-by: Joachim Eastwood <joachim.eastwood at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3588s-nanopi-m6.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-m6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-m6.dtsi
index ca115d8e108a..dd61c61fe7d7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-m6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-m6.dtsi
@@ -36,13 +36,13 @@ user_led: led-1 {
 		};
 	};
 
-	vcc_3v3_pcie: regulator-vcc-3v3-pcie {
+	vcc3v3_pcie: regulator-vcc3v3-pcie {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pcie20x1_2_con_pwren>;
-		regulator-name = "vcc_3v3_pcie";
+		regulator-name = "vcc3v3_pcie";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc5v0_sys>;
@@ -95,7 +95,7 @@ &pcie2x1l1 { /* M.2 E-key 2230 */
 
 &pcie2x1l2 { /* M.2 M-key 2280 */
 	pinctrl-0 = <&pcie20x1_2_perstn_m0>, <&pcie20x1m0_clkreqn>, <&pcie20x1m0_waken>;
-	vpcie3v3-supply = <&vcc_3v3_pcie>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
 };
 
 &pinctrl {

-- 
2.56.0