[PATCH 6/9] arm64: dts: rockchip: rk3588s-nanopi: rename usb host power pin

[Joachim Eastwood via B4 Relay]

From: Joachim Eastwood <joachim.eastwood at gmail.com>

usb_host_pwren matches the signal name in the schematics, which
simplifies cross-referencing. In M6/M6V2 this pin was renamed to
usb20_host_pwren.

Signed-off-by: Joachim Eastwood <joachim.eastwood at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
index 1d37862edb5b..56264ff3b409 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
@@ -79,7 +79,7 @@ vcc5v0_host_20: regulator-vcc5v0-host-20 {
 		enable-active-high;
 		gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host20_en>;
+		pinctrl-0 = <&usb_host_pwren>;
 		regulator-name = "vcc5v0_host_20";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -340,7 +340,7 @@ sdmmc_pwren: sdmmc-pwren {
 	};
 
 	usb {
-		vcc5v0_host20_en: vcc5v0-host20-en {
+		usb_host_pwren: usb-host-pwren { /* usb20_host_pwren on M6 */
 			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};

-- 
2.56.0