[PATCH 7/9] arm64: dts: rockchip: rk3588s-nanopi: rename gmac1 reset pin

[Joachim Eastwood via B4 Relay]

From: Joachim Eastwood <joachim.eastwood at gmail.com>

gmac1_rstn matches the signal name in the schematics, which simplifies
cross-referencing.

Signed-off-by: Joachim Eastwood <joachim.eastwood at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
index 56264ff3b409..2789c3d9bcc4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi
@@ -274,7 +274,7 @@ rgmii_phy1: ethernet-phy at 1 {
 		compatible = "ethernet-phy-id001c.c916";
 		reg = <0x1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&rtl8211f_rst>;
+		pinctrl-0 = <&gmac1_rstn>;
 		reset-assert-us = <20000>;
 		reset-deassert-us = <100000>;
 		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
@@ -346,7 +346,7 @@ usb_host_pwren: usb-host-pwren { /* usb20_host_pwren on M6 */
 	};
 
 	rtl8211f {
-		rtl8211f_rst: rtl8211f-rst {
+		gmac1_rstn: gmac1-rstn {
 			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};

-- 
2.56.0