[PATCH V8 02/10] dt-bindings: iio: imu: icm42600: Add icm42607 binding

[Conor Dooley]

On Wed, May 20, 2026 at 05:42:17PM +0100, Jonathan Cameron wrote:
> On Mon, 18 May 2026 15:05:17 -0500
> Chris Morgan <macroalpha82 at gmail.com> wrote:
> 
> > From: Chris Morgan <macromorgan at hotmail.com>
> > 
> > Add devicetree binding for the Invensense ICM42607 and Invensense
> > ICM42607P inertial measurement unit. This unit is a combined
> > accelerometer, gyroscope, and thermometer available via I2C or SPI.
> > 
> > This device is functionally very similar to the icm42600 series with a
> > very different register layout.
> > 
> > Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>
> Note that Sashiko has highlighted that the binding this being added to
> has a potential problem.
> 
> interrupts are required but interrupt-names are not.
> That would be fine but the binding doesn't say there is a default
> ordering for the interrupts - so if we don't have names we have no
> idea which interrupt it is.
> 
> This needs fixing - probably by adding a default

Worth pointing out that this isn't an issue with this particular patch,
the problem exists in mainline.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20260521/90d9f373/attachment.sig>