[PATCH 0/3] Add Invensense ICM42607

[Andy Shevchenko]

On Tue, Feb 24, 2026 at 10:31:02AM -0600, Chris Morgan wrote:

> Add support for the ICM42607 IMU. This sensor shares the same
> functionality but a different register layout with the existing
> ICM42600.
> 
> This driver should work with the ICM42607 and ICM42607P over both I2C
> and SPI, however only the ICM42607P over I2C could be tested.

Thanks for your contribution, but...

NAK.

It's unreviewable bulk out of 4kLoC! I even won't bother looking at any other
messages in this (too mini) series.

TL;DR: reviewable code is limited at ~750 (or less) ± 150 LoC per patch.

-- 
With Best Regards,
Andy Shevchenko