[PATCH v2 1/1] arm64: dts: rockchip: rk3528: Add CPU frequency scaling support

[Chukun Pan]

Hi Jonas,

> One possible difference here is that the actual CPU rate is controlled
> by a PVTPLL where TF-A will configure a osc ring-length based on the
> requested rate and Linux only configure the regulator voltage.
>
> I have no idea if the configuration made by TF-A will have any affect on
> power usage, but I suggest we keep all opp here because both TF-A and
> Linux is involved in configuring the CPU rate.
>
> The measured rate can typically be read from a PVTPLL status reg, it
> will be different depending on the ring-length, voltage and silicon
> quality for the rates >= 816 MHz.

Alexey suggested that we remove 408MHz, 600MHz and 816MHz from the
opp-table. Do you think it is acceptable to use 850mV for 1008MHz?

Thanks,
Chukun

--
2.25.1