[RESEND2 PATCH v5 0/3] Add Radxa CM5 module and IO board dts

[FUKAUMI Naoki]

Hi Jimmy,

On 12/3/25 14:42, Jimmy Hon wrote:
> On Tue, Dec 2, 2025 at 4:16 AM FUKAUMI Naoki <naoki at radxa.com> wrote:
>>
>> Hi all,
>>
>> I sincerely hope the following will be helpful in your review.
>>    https://github.com/RadxaNaoki/linux/blob/cm5-io-v999-20251201/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
>>    https://github.com/RadxaNaoki/linux/blob/cm5-io-v999-20251201/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts
> Could you elaborate on why you're linking to the "v999" branch? The

When you review something (e.g., v5), you might find it helpful to refer 
to another similar thing (e.g., v999).

> content of that branch doesn't match the contents of this patch series
> (i.e. RESEND 2 of v5). The "v5" branch looks closer to this
> submission.
> https://github.com/RadxaNaoki/linux/blob/cm5-io-v5-20251201
> 
> Comments on the "v999" branch...it does have the improvements:

You do not need to review v999, as it is not part of this patch series 
(it is Joseph's work). Please only review v5 and subsequent versions.

> - that allows the usage of the Radxa eMMC to uSD adapter
> - defines the gmac1 in the SoM dtsi, but only enables the gmac1 in the
> IO board's dts.

Thanks anyway.

Best regards,

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.

>>
>> Best regards,
>>
>> --
>> FUKAUMI Naoki
>> Radxa Computer (Shenzhen) Co., Ltd.
> 
> Jimmy
>