[PATCH] arm64: dts: rockchip: radxa-e25: fix typo in vcc3v3-pi6c-05-regulator

[Heiko Stuebner]

Hi,

Am Donnerstag, 20. April 2023, 12:15:55 CEST schrieb FUKAUMI Naoki:
> "gpios" should be "gpio"

I don't see this.

The fixed-regulator binding does specify both "gpios" and "gpio" as valid.
And the code also tries both [0].

So this change really isn't necessary.


Heiko

[0] https://elixir.bootlin.com/linux/latest/source/drivers/gpio/gpiolib.h#L86

> Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
> Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
> index 63c4bd873188..bde43c4a5bb1 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
> @@ -89,7 +89,7 @@ vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
>  	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
>  		compatible = "regulator-fixed";
>  		enable-active-high;
> -		gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
> +		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pcie_enable_h>;
>  		regulator-name = "vcc3v3_pcie";
>