[PATCH v4 4/4] arm64: dts: rk3399-pinephone-pro: Add internal display support

[Javier Martinez Canillas]

From: Ondrej Jirman <megi at xff.cz>

The phone's display is using Hannstar LCD panel, and Goodix based
touchscreen. Support it.

Signed-off-by: Ondrej Jirman <megi at xff.cz>
Co-developed-by: Martijn Braam <martijn at brixit.nl>
Signed-off-by: Martijn Braam <martijn at brixit.nl>
Co-developed-by: Kamil Trzciński <ayufan at ayufan.eu>
Signed-off-by: Kamil Trzciński <ayufan at ayufan.eu>
Signed-off-by: Javier Martinez Canillas <javierm at redhat.com>
Tested-by: Tom Fitzhenry <tom at tom-fitzhenry.me.uk>
---

Changes in v4:
- Add Tom Fitzhenry's Tested-by tag.
- Keep the DTS nodes sorted alphabetically (Tom Fitzhenry).

Changes in v2:
- Fix regulator node names (Maya Matuszczyk).
- Drop non-existent "poweroff-in-suspend" property (Maya Matuszczyk).
- Remove unnecessary comments in panel node (Maya Matuszczyk).

 .../dts/rockchip/rk3399-pinephone-pro.dts     | 123 ++++++++++++++++++
 1 file changed, 123 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index 04403a76238b..0d48fbc5dbe4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -25,6 +25,12 @@ aliases {
 		mmc2 = &sdhci;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 1000000 0>;
+		pwm-delay-us = <10000>;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -82,6 +88,32 @@ vcc1v8_codec: vcc1v8-codec-regulator {
 		vin-supply = <&vcc3v3_sys>;
 	};
 
+	/* MIPI DSI panel 1.8v supply */
+	vcc1v8_lcd: vcc1v8-lcd-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc1v8_lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+		gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&display_pwren1>;
+	};
+
+	/* MIPI DSI panel 2.8v supply */
+	vcc2v8_lcd: vcc2v8-lcd-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc2v8_lcd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc3v3_sys>;
+		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&display_pwren>;
+	};
+
 	wifi_pwrseq: sdio-wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk818 1>;
@@ -132,6 +164,11 @@ &emmc_phy {
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	i2c-scl-rising-time-ns = <168>;
@@ -214,6 +251,9 @@ vcc3v0_touch: LDO_REG2 {
 				regulator-name = "vcc3v0_touch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vcca1v8_codec: LDO_REG3 {
@@ -347,6 +387,25 @@ opp07 {
 	};
 };
 
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	touchscreen at 14 {
+		compatible = "goodix,gt917s";
+		reg = <0x14>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PB5 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&vcc3v0_touch>;
+		VDDIO-supply = <&vcc3v0_touch>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+	};
+};
+
 &io_domains {
 	bt656-supply = <&vcc1v8_dvp>;
 	audio-supply = <&vcca1v8_codec>;
@@ -355,6 +414,40 @@ &io_domains {
 	status = "okay";
 };
 
+&mipi_dsi {
+	status = "okay";
+	clock-master;
+
+	ports {
+		mipi_out: port at 1 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel at 0 {
+		compatible = "hannstar,hsd060bhw4", "himax,hx8394";
+		reg = <0>;
+		backlight = <&backlight>;
+		reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vcc2v8_lcd>;
+		iovcc-supply = <&vcc1v8_lcd>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&display_rst_l>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
 &pmu_io_domains {
 	pmu1830-supply = <&vcc_1v8>;
 	status = "okay";
@@ -367,6 +460,20 @@ pwrbtn_pin: pwrbtn-pin {
 		};
 	};
 
+	dsi {
+		display_rst_l: display-rst-l {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		display_pwren: display-pwren {
+			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		display_pwren1: display-pwren1 {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -408,6 +515,10 @@ bt_reset_pin: bt-reset-pin {
 	};
 };
 
+&pwm0 {
+	status = "okay";
+};
+
 &sdio0 {
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -472,3 +583,15 @@ bluetooth {
 &uart2 {
 	status = "okay";
 };
+
+&vopb {
+	status = "okay";
+	assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>,
+			  <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+	assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
+	assigned-clock-parents = <&cru PLL_CPLL>, <&cru DCLK_VOP0_FRAC>;
+};
+
+&vopb_mmu {
+	status = "okay";
+};
-- 
2.38.1