[PATCH v4 2/4] dt-bindings: power: rockchip: Convert to json-schema
Enric Balletbo i Serra
enric.balletbo at collabora.com
Wed Mar 24 10:32:42 GMT 2021
On 24/3/21 11:25, Enric Balletbo i Serra wrote:
> Hi Elaine,
>
> On 24/3/21 11:18, elaine.zhang wrote:
>> Hi, Enric
>>
>> 在 2021/3/24 下午5:56, Enric Balletbo i Serra 写道:
>>> Hi Elaine,
>>>
>>> This is not the exact version I sent, and you reintroduced a "problem" that were
>>> already solved/discussed on previous versions. See below:
>>>
>>> On 24/3/21 8:16, Elaine Zhang wrote:
>>>> Convert the soc/rockchip/power_domain.txt binding document to
>>>> json-schema and move to the power bindings directory.
>>>>
>>>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
>>> If you do significant is a good practice shortly describe them within [] here.
>>>
>>>> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
>>> Note that my last version already had the
>>>
>>> Reviewed-by: Rob Herring <robh at kernel.org>
>>>
>>> Which should be fine for merging (with probably only minor changes) and you
>>> could maintain if you don't do significant changes, but that's not the case, as
>>> I said, you are reintroducing one problem. Please review the comments already
>>> received on this patchset or similar patchsets to avoid this.
>>>
>>>> ---
>>>> .../power/rockchip,power-controller.yaml | 284 ++++++++++++++++++
>>>> .../bindings/soc/rockchip/power_domain.txt | 136 ---------
>>>> 2 files changed, 284 insertions(+), 136 deletions(-)
>>>> create mode 100644
>>>> Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
>>>> delete mode 100644
>>>> Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>>>>
>>>> diff --git
>>>> a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
>>>> b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
>>>> new file mode 100644
>>>> index 000000000000..a220322c5139
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
>>>> @@ -0,0 +1,284 @@
>>>> +# SPDX-License-Identifier: GPL-2.0-only
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Rockchip Power Domains
>>>> +
>>>> +maintainers:
>>>> + - Elaine Zhang <zhangqing at rock-chips.com>
>>>> + - Rob Herring <robh+dt at kernel.org>
>>> Up to Rob, but I don't think Rob would like to be the maintainer. I think you
>>> can only include yourself and Heiko.
>>>
>>>
>>>> + - Heiko Stuebner <heiko at sntech.de>
>>>> +
>>>> +description: |
>>>> + Rockchip processors include support for multiple power domains which can be
>>>> + powered up/down by software based on different application scenarios to
>>>> save power.
>>>> +
>>>> + Power domains contained within power-controller node are generic power domain
>>>> + providers documented in
>>>> Documentation/devicetree/bindings/power/power-domain.yaml.
>>>> +
>>>> + IP cores belonging to a power domain should contain a "power-domains"
>>>> + property that is a phandle for the power domain node representing the domain.
>>>> +
>>>> +properties:
>>>> + $nodename:
>>>> + const: power-controller
>>>> +
>>>> + compatible:
>>>> + enum:
>>>> + - rockchip,px30-power-controller
>>>> + - rockchip,rk3036-power-controller
>>>> + - rockchip,rk3066-power-controller
>>>> + - rockchip,rk3128-power-controller
>>>> + - rockchip,rk3188-power-controller
>>>> + - rockchip,rk3228-power-controller
>>>> + - rockchip,rk3288-power-controller
>>>> + - rockchip,rk3328-power-controller
>>>> + - rockchip,rk3366-power-controller
>>>> + - rockchip,rk3368-power-controller
>>>> + - rockchip,rk3399-power-controller
>>>> +
>>>> + "#power-domain-cells":
>>>> + const: 1
>>>> +
>>>> + "#address-cells":
>>>> + const: 1
>>>> +
>>>> + "#size-cells":
>>>> + const: 0
>>>> +
>>>> +patternProperties:
>>>> + "^pd_[0-9a-z_]{2,10}@[0-9a-f]+$":
>>>> + type: object
>>>> + description: |
>>>> + Represents the power domains within the power controller node as
>>>> documented
>>>> + in Documentation/devicetree/bindings/power/power-domain.yaml.
>>>> +
>>> The node names must be generic, as this is power-domain must be in the form:
>>>
>>> +patternProperties:
>>> + "^power-domain@[0-9a-f]+$":
>> In this way, dtbs_check cannot be passed, and all the usage methods in dts of
>> Rockchip need to be corrected, which I think is a bigger change.
>
> Well, the problem is in the Rockchip dtbs, so needs to be fixed there. The
> bindings must describe hardware in a generic way, not describe the actual dtbs
> to not report errors.
>
FWIW I remember I did something regarding this but never sent to upstream, feel
free to pick if you find useful.
*
https://gitlab.collabora.com/eballetbo/linux/-/commit/12499f223e3d33602449b9102404fe573fb804f5
*
https://gitlab.collabora.com/eballetbo/linux/-/commit/12499f223e3d33602449b9102404fe573fb804f5
*
https://gitlab.collabora.com/eballetbo/linux/-/commit/492bf2213c341152a1c2423242c5634b9e53ff27
> Thanks,
> Enric
>
>>>
>>>
>>>> + properties:
>>>> +
>>>> + "#power-domain-cells":
>>>> + description:
>>>> + Must be 0 for nodes representing a single PM domain and 1 for nodes
>>>> + providing multiple PM domains.
>>>> +
>>>> + "#address-cells":
>>>> + const: 1
>>>> +
>>>> + "#size-cells":
>>>> + const: 0
>>>> +
>>>> + reg:
>>>> + maxItems: 1
>>>> + description: |
>>>> + Power domain index. Valid values are defined in
>>>> + "include/dt-bindings/power/px30-power.h"
>>>> + "include/dt-bindings/power/rk3036-power.h"
>>>> + "include/dt-bindings/power/rk3066-power.h"
>>>> + "include/dt-bindings/power/rk3128-power.h"
>>>> + "include/dt-bindings/power/rk3188-power.h"
>>>> + "include/dt-bindings/power/rk3228-power.h"
>>>> + "include/dt-bindings/power/rk3288-power.h"
>>>> + "include/dt-bindings/power/rk3328-power.h"
>>>> + "include/dt-bindings/power/rk3366-power.h"
>>>> + "include/dt-bindings/power/rk3368-power.h"
>>>> + "include/dt-bindings/power/rk3399-power.h"
>>>> +
>>>> + clocks:
>>>> + description: |
>>>> + A number of phandles to clocks that need to be enabled while power
>>>> domain
>>>> + switches state.
>>>> +
>>>> + pm_qos:
>>>> + description: |
>>>> + A number of phandles to qos blocks which need to be saved and
>>>> restored
>>>> + while power domain switches state.
>>>> +
>>>> + patternProperties:
>>>> + "^pd_[0-9a-z_]{2,10}@[0-9a-f]+$":
>>> The same here:
>>>
>>> +patternProperties:
>>> + "^power-domain@[0-9a-f]+$":
>>>
>>>
>>>
>>>> + type: object
>>>> + description: |
>>>> + Represents a power domain child within a power domain parent node.
>>>> +
>>>> + properties:
>>>> +
>>>> + "#power-domain-cells":
>>>> + description:
>>>> + Must be 0 for nodes representing a single PM domain and 1 for
>>>> nodes
>>>> + providing multiple PM domains.
>>>> +
>>>> + "#address-cells":
>>>> + const: 1
>>>> +
>>>> + "#size-cells":
>>>> + const: 0
>>>> +
>>>> + reg:
>>>> + maxItems: 1
>>>> +
>>>> + clocks:
>>>> + description: |
>>>> + A number of phandles to clocks that need to be enabled while
>>>> power domain
>>>> + switches state.
>>>> +
>>>> + pm_qos:
>>>> + description: |
>>>> + A number of phandles to qos blocks which need to be saved and
>>>> restored
>>>> + while power domain switches state.
>>>> +
>>>> + patternProperties:
>>>> + "^pd_[0-9a-z_]{2,10}@[0-9a-f]+$":
>>> And here:
>>>
>>>> + type: object
>>>> + description: |
>>>> + Represents a power domain child within a power domain parent
>>>> node.
>>>> +
>>>> + properties:
>>>> +
>>>> + "#power-domain-cells":
>>>> + description:
>>>> + Must be 0 for nodes representing a single PM domain and 1
>>>> for nodes
>>>> + providing multiple PM domains.
>>>> +
>>>> + "#address-cells":
>>>> + const: 1
>>>> +
>>>> + "#size-cells":
>>>> + const: 0
>>>> +
>>>> + reg:
>>>> + maxItems: 1
>>>> +
>>>> + clocks:
>>>> + description: |
>>>> + A number of phandles to clocks that need to be enabled
>>>> while power domain
>>>> + switches state.
>>>> +
>>>> + pm_qos:
>>>> + description: |
>>>> + A number of phandles to qos blocks which need to be saved
>>>> and restored
>>>> + while power domain switches state.
>>>> +
>>>> + required:
>>>> + - reg
>>>> +
>>>> + additionalProperties: false
>>>> +
>>>> + required:
>>>> + - reg
>>>> +
>>>> + additionalProperties: false
>>>> +
>>>> + required:
>>>> + - reg
>>>> +
>>>> + additionalProperties: false
>>>> +
>>>> +required:
>>>> + - compatible
>>>> + - "#power-domain-cells"
>>>> +
>>>> +additionalProperties: false
>>>> +
>>>> +examples:
>>>> + - |
>>>> + #include <dt-bindings/clock/rk3399-cru.h>
>>>> + #include <dt-bindings/power/rk3399-power.h>
>>>> +
>>>> + soc {
>>>> + #address-cells = <2>;
>>>> + #size-cells = <2>;
>>>> +
>>>> + qos_hdcp: qos at ffa90000 {
>>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>>> + reg = <0x0 0xffa90000 0x0 0x20>;
>>>> + };
>>>> +
>>>> + qos_iep: qos at ffa98000 {
>>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>>> + reg = <0x0 0xffa98000 0x0 0x20>;
>>>> + };
>>>> +
>>>> + qos_rga_r: qos at ffab0000 {
>>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>>> + reg = <0x0 0xffab0000 0x0 0x20>;
>>>> + };
>>>> +
>>>> + qos_rga_w: qos at ffab0080 {
>>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>>> + reg = <0x0 0xffab0080 0x0 0x20>;
>>>> + };
>>>> +
>>>> + qos_video_m0: qos at ffab8000 {
>>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>>> + reg = <0x0 0xffab8000 0x0 0x20>;
>>>> + };
>>>> +
>>>> + qos_video_m1_r: qos at ffac0000 {
>>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>>> + reg = <0x0 0xffac0000 0x0 0x20>;
>>>> + };
>>>> +
>>>> + qos_video_m1_w: qos at ffac0080 {
>>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>>> + reg = <0x0 0xffac0080 0x0 0x20>;
>>>> + };
>>>> +
>>>> + power-management at ff310000 {
>>>> + compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
>>>> + reg = <0x0 0xff310000 0x0 0x1000>;
>>>> +
>>>> + power-controller {
>>>> + compatible = "rockchip,rk3399-power-controller";
>>>> + #power-domain-cells = <1>;
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>> +
>>>> + /* These power domains are grouped by VD_CENTER */
>>>> + pd_iep at RK3399_PD_IEP {
>>> Here and below must be generic power-domain at RK3399_PD_IEP
>>>
>>>
>>>> + reg = <RK3399_PD_IEP>;
>>>> + clocks = <&cru ACLK_IEP>,
>>>> + <&cru HCLK_IEP>;
>>>> + pm_qos = <&qos_iep>;
>>>> + #power-domain-cells = <0>;
>>>> + };
>>>> + pd_rga at RK3399_PD_RGA {
>>>> + reg = <RK3399_PD_RGA>;
>>>> + clocks = <&cru ACLK_RGA>,
>>>> + <&cru HCLK_RGA>;
>>>> + pm_qos = <&qos_rga_r>,
>>>> + <&qos_rga_w>;
>>>> + #power-domain-cells = <0>;
>>>> + };
>>>> + pd_vcodec at RK3399_PD_VCODEC {
>>>> + reg = <RK3399_PD_VCODEC>;
>>>> + clocks = <&cru ACLK_VCODEC>,
>>>> + <&cru HCLK_VCODEC>;
>>>> + pm_qos = <&qos_video_m0>;
>>>> + #power-domain-cells = <0>;
>>>> + };
>>>> + pd_vdu at RK3399_PD_VDU {
>>>> + reg = <RK3399_PD_VDU>;
>>>> + clocks = <&cru ACLK_VDU>,
>>>> + <&cru HCLK_VDU>;
>>>> + pm_qos = <&qos_video_m1_r>,
>>>> + <&qos_video_m1_w>;
>>>> + #power-domain-cells = <0>;
>>>> + };
>>>> + pd_vio at RK3399_PD_VIO {
>>>> + reg = <RK3399_PD_VIO>;
>>>> + #power-domain-cells = <1>;
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>> +
>>>> + pd_hdcp at RK3399_PD_HDCP {
>>>> + reg = <RK3399_PD_HDCP>;
>>>> + clocks = <&cru ACLK_HDCP>,
>>>> + <&cru HCLK_HDCP>,
>>>> + <&cru PCLK_HDCP>;
>>>> + pm_qos = <&qos_hdcp>;
>>>> + #power-domain-cells = <0>;
>>>> + };
>>>> + };
>>>> + };
>>>> + };
>>>> + };
>>>> diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>>>> b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>>>> deleted file mode 100644
>>>> index 8304eceb62e4..000000000000
>>>> --- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>>>> +++ /dev/null
>>>> @@ -1,136 +0,0 @@
>>>> -* Rockchip Power Domains
>>>> -
>>>> -Rockchip processors include support for multiple power domains which can be
>>>> -powered up/down by software based on different application scenes to save
>>>> power.
>>>> -
>>>> -Required properties for power domain controller:
>>>> -- compatible: Should be one of the following.
>>>> - "rockchip,px30-power-controller" - for PX30 SoCs.
>>>> - "rockchip,rk3036-power-controller" - for RK3036 SoCs.
>>>> - "rockchip,rk3066-power-controller" - for RK3066 SoCs.
>>>> - "rockchip,rk3128-power-controller" - for RK3128 SoCs.
>>>> - "rockchip,rk3188-power-controller" - for RK3188 SoCs.
>>>> - "rockchip,rk3228-power-controller" - for RK3228 SoCs.
>>>> - "rockchip,rk3288-power-controller" - for RK3288 SoCs.
>>>> - "rockchip,rk3328-power-controller" - for RK3328 SoCs.
>>>> - "rockchip,rk3366-power-controller" - for RK3366 SoCs.
>>>> - "rockchip,rk3368-power-controller" - for RK3368 SoCs.
>>>> - "rockchip,rk3399-power-controller" - for RK3399 SoCs.
>>>> -- #power-domain-cells: Number of cells in a power-domain specifier.
>>>> - Should be 1 for multiple PM domains.
>>>> -- #address-cells: Should be 1.
>>>> -- #size-cells: Should be 0.
>>>> -
>>>> -Required properties for power domain sub nodes:
>>>> -- reg: index of the power domain, should use macros in:
>>>> - "include/dt-bindings/power/px30-power.h" - for PX30 type power domain.
>>>> - "include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
>>>> - "include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain.
>>>> - "include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
>>>> - "include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain.
>>>> - "include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain.
>>>> - "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
>>>> - "include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
>>>> - "include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
>>>> - "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
>>>> - "include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
>>>> -- clocks (optional): phandles to clocks which need to be enabled while power
>>>> domain
>>>> - switches state.
>>>> -- pm_qos (optional): phandles to qos blocks which need to be saved and restored
>>>> - while power domain switches state.
>>>> -
>>>> -Qos Example:
>>>> -
>>>> - qos_gpu: qos_gpu at ffaf0000 {
>>>> - compatible ="syscon";
>>>> - reg = <0x0 0xffaf0000 0x0 0x20>;
>>>> - };
>>>> -
>>>> -Example:
>>>> -
>>>> - power: power-controller {
>>>> - compatible = "rockchip,rk3288-power-controller";
>>>> - #power-domain-cells = <1>;
>>>> - #address-cells = <1>;
>>>> - #size-cells = <0>;
>>>> -
>>>> - pd_gpu {
>>>> - reg = <RK3288_PD_GPU>;
>>>> - clocks = <&cru ACLK_GPU>;
>>>> - pm_qos = <&qos_gpu>;
>>>> - };
>>>> - };
>>>> -
>>>> - power: power-controller {
>>>> - compatible = "rockchip,rk3368-power-controller";
>>>> - #power-domain-cells = <1>;
>>>> - #address-cells = <1>;
>>>> - #size-cells = <0>;
>>>> -
>>>> - pd_gpu_1 {
>>>> - reg = <RK3368_PD_GPU_1>;
>>>> - clocks = <&cru ACLK_GPU_CFG>;
>>>> - };
>>>> - };
>>>> -
>>>> -Example 2:
>>>> - power: power-controller {
>>>> - compatible = "rockchip,rk3399-power-controller";
>>>> - #power-domain-cells = <1>;
>>>> - #address-cells = <1>;
>>>> - #size-cells = <0>;
>>>> -
>>>> - pd_vio {
>>>> - #address-cells = <1>;
>>>> - #size-cells = <0>;
>>>> - reg = <RK3399_PD_VIO>;
>>>> -
>>>> - pd_vo {
>>>> - #address-cells = <1>;
>>>> - #size-cells = <0>;
>>>> - reg = <RK3399_PD_VO>;
>>>> -
>>>> - pd_vopb {
>>>> - reg = <RK3399_PD_VOPB>;
>>>> - };
>>>> -
>>>> - pd_vopl {
>>>> - reg = <RK3399_PD_VOPL>;
>>>> - };
>>>> - };
>>>> - };
>>>> - };
>>>> -
>>>> -Node of a device using power domains must have a power-domains property,
>>>> -containing a phandle to the power device node and an index specifying which
>>>> -power domain to use.
>>>> -The index should use macros in:
>>>> - "include/dt-bindings/power/px30-power.h" - for px30 type power domain.
>>>> - "include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
>>>> - "include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain.
>>>> - "include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain.
>>>> - "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
>>>> - "include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
>>>> - "include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
>>>> - "include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
>>>> - "include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain.
>>>> -
>>>> -Example of the node using power domain:
>>>> -
>>>> - node {
>>>> - /* ... */
>>>> - power-domains = <&power RK3288_PD_GPU>;
>>>> - /* ... */
>>>> - };
>>>> -
>>>> - node {
>>>> - /* ... */
>>>> - power-domains = <&power RK3368_PD_GPU_1>;
>>>> - /* ... */
>>>> - };
>>>> -
>>>> - node {
>>>> - /* ... */
>>>> - power-domains = <&power RK3399_PD_VOPB>;
>>>> - /* ... */
>>>> - };
>>>>
>>>
>>>
>>
>>
More information about the Linux-rockchip
mailing list