[PATCH v4 2/4] dt-bindings: power: rockchip: Convert to json-schema
Enric Balletbo i Serra
enric.balletbo at collabora.com
Wed Mar 24 10:25:51 GMT 2021
Hi Elaine,
On 24/3/21 11:18, elaine.zhang wrote:
> Hi, Enric
>
> 在 2021/3/24 下午5:56, Enric Balletbo i Serra 写道:
>> Hi Elaine,
>>
>> This is not the exact version I sent, and you reintroduced a "problem" that were
>> already solved/discussed on previous versions. See below:
>>
>> On 24/3/21 8:16, Elaine Zhang wrote:
>>> Convert the soc/rockchip/power_domain.txt binding document to
>>> json-schema and move to the power bindings directory.
>>>
>>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
>> If you do significant is a good practice shortly describe them within [] here.
>>
>>> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
>> Note that my last version already had the
>>
>> Reviewed-by: Rob Herring <robh at kernel.org>
>>
>> Which should be fine for merging (with probably only minor changes) and you
>> could maintain if you don't do significant changes, but that's not the case, as
>> I said, you are reintroducing one problem. Please review the comments already
>> received on this patchset or similar patchsets to avoid this.
>>
>>> ---
>>> .../power/rockchip,power-controller.yaml | 284 ++++++++++++++++++
>>> .../bindings/soc/rockchip/power_domain.txt | 136 ---------
>>> 2 files changed, 284 insertions(+), 136 deletions(-)
>>> create mode 100644
>>> Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
>>> delete mode 100644
>>> Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
>>> b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
>>> new file mode 100644
>>> index 000000000000..a220322c5139
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
>>> @@ -0,0 +1,284 @@
>>> +# SPDX-License-Identifier: GPL-2.0-only
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Rockchip Power Domains
>>> +
>>> +maintainers:
>>> + - Elaine Zhang <zhangqing at rock-chips.com>
>>> + - Rob Herring <robh+dt at kernel.org>
>> Up to Rob, but I don't think Rob would like to be the maintainer. I think you
>> can only include yourself and Heiko.
>>
>>
>>> + - Heiko Stuebner <heiko at sntech.de>
>>> +
>>> +description: |
>>> + Rockchip processors include support for multiple power domains which can be
>>> + powered up/down by software based on different application scenarios to
>>> save power.
>>> +
>>> + Power domains contained within power-controller node are generic power domain
>>> + providers documented in
>>> Documentation/devicetree/bindings/power/power-domain.yaml.
>>> +
>>> + IP cores belonging to a power domain should contain a "power-domains"
>>> + property that is a phandle for the power domain node representing the domain.
>>> +
>>> +properties:
>>> + $nodename:
>>> + const: power-controller
>>> +
>>> + compatible:
>>> + enum:
>>> + - rockchip,px30-power-controller
>>> + - rockchip,rk3036-power-controller
>>> + - rockchip,rk3066-power-controller
>>> + - rockchip,rk3128-power-controller
>>> + - rockchip,rk3188-power-controller
>>> + - rockchip,rk3228-power-controller
>>> + - rockchip,rk3288-power-controller
>>> + - rockchip,rk3328-power-controller
>>> + - rockchip,rk3366-power-controller
>>> + - rockchip,rk3368-power-controller
>>> + - rockchip,rk3399-power-controller
>>> +
>>> + "#power-domain-cells":
>>> + const: 1
>>> +
>>> + "#address-cells":
>>> + const: 1
>>> +
>>> + "#size-cells":
>>> + const: 0
>>> +
>>> +patternProperties:
>>> + "^pd_[0-9a-z_]{2,10}@[0-9a-f]+$":
>>> + type: object
>>> + description: |
>>> + Represents the power domains within the power controller node as
>>> documented
>>> + in Documentation/devicetree/bindings/power/power-domain.yaml.
>>> +
>> The node names must be generic, as this is power-domain must be in the form:
>>
>> +patternProperties:
>> + "^power-domain@[0-9a-f]+$":
> In this way, dtbs_check cannot be passed, and all the usage methods in dts of
> Rockchip need to be corrected, which I think is a bigger change.
Well, the problem is in the Rockchip dtbs, so needs to be fixed there. The
bindings must describe hardware in a generic way, not describe the actual dtbs
to not report errors.
Thanks,
Enric
>>
>>
>>> + properties:
>>> +
>>> + "#power-domain-cells":
>>> + description:
>>> + Must be 0 for nodes representing a single PM domain and 1 for nodes
>>> + providing multiple PM domains.
>>> +
>>> + "#address-cells":
>>> + const: 1
>>> +
>>> + "#size-cells":
>>> + const: 0
>>> +
>>> + reg:
>>> + maxItems: 1
>>> + description: |
>>> + Power domain index. Valid values are defined in
>>> + "include/dt-bindings/power/px30-power.h"
>>> + "include/dt-bindings/power/rk3036-power.h"
>>> + "include/dt-bindings/power/rk3066-power.h"
>>> + "include/dt-bindings/power/rk3128-power.h"
>>> + "include/dt-bindings/power/rk3188-power.h"
>>> + "include/dt-bindings/power/rk3228-power.h"
>>> + "include/dt-bindings/power/rk3288-power.h"
>>> + "include/dt-bindings/power/rk3328-power.h"
>>> + "include/dt-bindings/power/rk3366-power.h"
>>> + "include/dt-bindings/power/rk3368-power.h"
>>> + "include/dt-bindings/power/rk3399-power.h"
>>> +
>>> + clocks:
>>> + description: |
>>> + A number of phandles to clocks that need to be enabled while power
>>> domain
>>> + switches state.
>>> +
>>> + pm_qos:
>>> + description: |
>>> + A number of phandles to qos blocks which need to be saved and
>>> restored
>>> + while power domain switches state.
>>> +
>>> + patternProperties:
>>> + "^pd_[0-9a-z_]{2,10}@[0-9a-f]+$":
>> The same here:
>>
>> +patternProperties:
>> + "^power-domain@[0-9a-f]+$":
>>
>>
>>
>>> + type: object
>>> + description: |
>>> + Represents a power domain child within a power domain parent node.
>>> +
>>> + properties:
>>> +
>>> + "#power-domain-cells":
>>> + description:
>>> + Must be 0 for nodes representing a single PM domain and 1 for
>>> nodes
>>> + providing multiple PM domains.
>>> +
>>> + "#address-cells":
>>> + const: 1
>>> +
>>> + "#size-cells":
>>> + const: 0
>>> +
>>> + reg:
>>> + maxItems: 1
>>> +
>>> + clocks:
>>> + description: |
>>> + A number of phandles to clocks that need to be enabled while
>>> power domain
>>> + switches state.
>>> +
>>> + pm_qos:
>>> + description: |
>>> + A number of phandles to qos blocks which need to be saved and
>>> restored
>>> + while power domain switches state.
>>> +
>>> + patternProperties:
>>> + "^pd_[0-9a-z_]{2,10}@[0-9a-f]+$":
>> And here:
>>
>>> + type: object
>>> + description: |
>>> + Represents a power domain child within a power domain parent
>>> node.
>>> +
>>> + properties:
>>> +
>>> + "#power-domain-cells":
>>> + description:
>>> + Must be 0 for nodes representing a single PM domain and 1
>>> for nodes
>>> + providing multiple PM domains.
>>> +
>>> + "#address-cells":
>>> + const: 1
>>> +
>>> + "#size-cells":
>>> + const: 0
>>> +
>>> + reg:
>>> + maxItems: 1
>>> +
>>> + clocks:
>>> + description: |
>>> + A number of phandles to clocks that need to be enabled
>>> while power domain
>>> + switches state.
>>> +
>>> + pm_qos:
>>> + description: |
>>> + A number of phandles to qos blocks which need to be saved
>>> and restored
>>> + while power domain switches state.
>>> +
>>> + required:
>>> + - reg
>>> +
>>> + additionalProperties: false
>>> +
>>> + required:
>>> + - reg
>>> +
>>> + additionalProperties: false
>>> +
>>> + required:
>>> + - reg
>>> +
>>> + additionalProperties: false
>>> +
>>> +required:
>>> + - compatible
>>> + - "#power-domain-cells"
>>> +
>>> +additionalProperties: false
>>> +
>>> +examples:
>>> + - |
>>> + #include <dt-bindings/clock/rk3399-cru.h>
>>> + #include <dt-bindings/power/rk3399-power.h>
>>> +
>>> + soc {
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> +
>>> + qos_hdcp: qos at ffa90000 {
>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>> + reg = <0x0 0xffa90000 0x0 0x20>;
>>> + };
>>> +
>>> + qos_iep: qos at ffa98000 {
>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>> + reg = <0x0 0xffa98000 0x0 0x20>;
>>> + };
>>> +
>>> + qos_rga_r: qos at ffab0000 {
>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>> + reg = <0x0 0xffab0000 0x0 0x20>;
>>> + };
>>> +
>>> + qos_rga_w: qos at ffab0080 {
>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>> + reg = <0x0 0xffab0080 0x0 0x20>;
>>> + };
>>> +
>>> + qos_video_m0: qos at ffab8000 {
>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>> + reg = <0x0 0xffab8000 0x0 0x20>;
>>> + };
>>> +
>>> + qos_video_m1_r: qos at ffac0000 {
>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>> + reg = <0x0 0xffac0000 0x0 0x20>;
>>> + };
>>> +
>>> + qos_video_m1_w: qos at ffac0080 {
>>> + compatible = "rockchip,rk3399-qos", "syscon";
>>> + reg = <0x0 0xffac0080 0x0 0x20>;
>>> + };
>>> +
>>> + power-management at ff310000 {
>>> + compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
>>> + reg = <0x0 0xff310000 0x0 0x1000>;
>>> +
>>> + power-controller {
>>> + compatible = "rockchip,rk3399-power-controller";
>>> + #power-domain-cells = <1>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + /* These power domains are grouped by VD_CENTER */
>>> + pd_iep at RK3399_PD_IEP {
>> Here and below must be generic power-domain at RK3399_PD_IEP
>>
>>
>>> + reg = <RK3399_PD_IEP>;
>>> + clocks = <&cru ACLK_IEP>,
>>> + <&cru HCLK_IEP>;
>>> + pm_qos = <&qos_iep>;
>>> + #power-domain-cells = <0>;
>>> + };
>>> + pd_rga at RK3399_PD_RGA {
>>> + reg = <RK3399_PD_RGA>;
>>> + clocks = <&cru ACLK_RGA>,
>>> + <&cru HCLK_RGA>;
>>> + pm_qos = <&qos_rga_r>,
>>> + <&qos_rga_w>;
>>> + #power-domain-cells = <0>;
>>> + };
>>> + pd_vcodec at RK3399_PD_VCODEC {
>>> + reg = <RK3399_PD_VCODEC>;
>>> + clocks = <&cru ACLK_VCODEC>,
>>> + <&cru HCLK_VCODEC>;
>>> + pm_qos = <&qos_video_m0>;
>>> + #power-domain-cells = <0>;
>>> + };
>>> + pd_vdu at RK3399_PD_VDU {
>>> + reg = <RK3399_PD_VDU>;
>>> + clocks = <&cru ACLK_VDU>,
>>> + <&cru HCLK_VDU>;
>>> + pm_qos = <&qos_video_m1_r>,
>>> + <&qos_video_m1_w>;
>>> + #power-domain-cells = <0>;
>>> + };
>>> + pd_vio at RK3399_PD_VIO {
>>> + reg = <RK3399_PD_VIO>;
>>> + #power-domain-cells = <1>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + pd_hdcp at RK3399_PD_HDCP {
>>> + reg = <RK3399_PD_HDCP>;
>>> + clocks = <&cru ACLK_HDCP>,
>>> + <&cru HCLK_HDCP>,
>>> + <&cru PCLK_HDCP>;
>>> + pm_qos = <&qos_hdcp>;
>>> + #power-domain-cells = <0>;
>>> + };
>>> + };
>>> + };
>>> + };
>>> + };
>>> diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>>> b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>>> deleted file mode 100644
>>> index 8304eceb62e4..000000000000
>>> --- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>>> +++ /dev/null
>>> @@ -1,136 +0,0 @@
>>> -* Rockchip Power Domains
>>> -
>>> -Rockchip processors include support for multiple power domains which can be
>>> -powered up/down by software based on different application scenes to save
>>> power.
>>> -
>>> -Required properties for power domain controller:
>>> -- compatible: Should be one of the following.
>>> - "rockchip,px30-power-controller" - for PX30 SoCs.
>>> - "rockchip,rk3036-power-controller" - for RK3036 SoCs.
>>> - "rockchip,rk3066-power-controller" - for RK3066 SoCs.
>>> - "rockchip,rk3128-power-controller" - for RK3128 SoCs.
>>> - "rockchip,rk3188-power-controller" - for RK3188 SoCs.
>>> - "rockchip,rk3228-power-controller" - for RK3228 SoCs.
>>> - "rockchip,rk3288-power-controller" - for RK3288 SoCs.
>>> - "rockchip,rk3328-power-controller" - for RK3328 SoCs.
>>> - "rockchip,rk3366-power-controller" - for RK3366 SoCs.
>>> - "rockchip,rk3368-power-controller" - for RK3368 SoCs.
>>> - "rockchip,rk3399-power-controller" - for RK3399 SoCs.
>>> -- #power-domain-cells: Number of cells in a power-domain specifier.
>>> - Should be 1 for multiple PM domains.
>>> -- #address-cells: Should be 1.
>>> -- #size-cells: Should be 0.
>>> -
>>> -Required properties for power domain sub nodes:
>>> -- reg: index of the power domain, should use macros in:
>>> - "include/dt-bindings/power/px30-power.h" - for PX30 type power domain.
>>> - "include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
>>> - "include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain.
>>> - "include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
>>> - "include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain.
>>> - "include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain.
>>> - "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
>>> - "include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
>>> - "include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
>>> - "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
>>> - "include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
>>> -- clocks (optional): phandles to clocks which need to be enabled while power
>>> domain
>>> - switches state.
>>> -- pm_qos (optional): phandles to qos blocks which need to be saved and restored
>>> - while power domain switches state.
>>> -
>>> -Qos Example:
>>> -
>>> - qos_gpu: qos_gpu at ffaf0000 {
>>> - compatible ="syscon";
>>> - reg = <0x0 0xffaf0000 0x0 0x20>;
>>> - };
>>> -
>>> -Example:
>>> -
>>> - power: power-controller {
>>> - compatible = "rockchip,rk3288-power-controller";
>>> - #power-domain-cells = <1>;
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> -
>>> - pd_gpu {
>>> - reg = <RK3288_PD_GPU>;
>>> - clocks = <&cru ACLK_GPU>;
>>> - pm_qos = <&qos_gpu>;
>>> - };
>>> - };
>>> -
>>> - power: power-controller {
>>> - compatible = "rockchip,rk3368-power-controller";
>>> - #power-domain-cells = <1>;
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> -
>>> - pd_gpu_1 {
>>> - reg = <RK3368_PD_GPU_1>;
>>> - clocks = <&cru ACLK_GPU_CFG>;
>>> - };
>>> - };
>>> -
>>> -Example 2:
>>> - power: power-controller {
>>> - compatible = "rockchip,rk3399-power-controller";
>>> - #power-domain-cells = <1>;
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> -
>>> - pd_vio {
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> - reg = <RK3399_PD_VIO>;
>>> -
>>> - pd_vo {
>>> - #address-cells = <1>;
>>> - #size-cells = <0>;
>>> - reg = <RK3399_PD_VO>;
>>> -
>>> - pd_vopb {
>>> - reg = <RK3399_PD_VOPB>;
>>> - };
>>> -
>>> - pd_vopl {
>>> - reg = <RK3399_PD_VOPL>;
>>> - };
>>> - };
>>> - };
>>> - };
>>> -
>>> -Node of a device using power domains must have a power-domains property,
>>> -containing a phandle to the power device node and an index specifying which
>>> -power domain to use.
>>> -The index should use macros in:
>>> - "include/dt-bindings/power/px30-power.h" - for px30 type power domain.
>>> - "include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
>>> - "include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain.
>>> - "include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain.
>>> - "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
>>> - "include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
>>> - "include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
>>> - "include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
>>> - "include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain.
>>> -
>>> -Example of the node using power domain:
>>> -
>>> - node {
>>> - /* ... */
>>> - power-domains = <&power RK3288_PD_GPU>;
>>> - /* ... */
>>> - };
>>> -
>>> - node {
>>> - /* ... */
>>> - power-domains = <&power RK3368_PD_GPU_1>;
>>> - /* ... */
>>> - };
>>> -
>>> - node {
>>> - /* ... */
>>> - power-domains = <&power RK3399_PD_VOPB>;
>>> - /* ... */
>>> - };
>>>
>>
>>
>
>
More information about the Linux-rockchip
mailing list