[RFC 2/3] regulator: rk808: Add support for rk818
Wadim Egorov
w.egorov at phytec.de
Fri Apr 8 02:47:40 PDT 2016
Add support for the rk818 regulator. The regulator module consists
of 4 DCDCs, 9 LDOs, 1 switch and 1 BOOST converter which is used to
power OTG and HDMI5V.
The output voltages are configurable and are meant to supply power
to the main processor and other components.
Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
---
drivers/regulator/rk808-regulator.c | 343 +++++++++++++++++++++++++++++++++---
1 file changed, 322 insertions(+), 21 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index d86a3dc..b2bbca7 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -6,6 +6,9 @@
* Author: Chris Zhong <zyw at rock-chips.com>
* Author: Zhang Qing <zhangqing at rock-chips.com>
*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov at phytec.de>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
@@ -32,6 +35,12 @@
#define RK808_BUCK4_VSEL_MASK 0xf
#define RK808_LDO_VSEL_MASK 0x1f
+#define RK818_BUCK_VSEL_MASK 0x3f
+#define RK818_BUCK4_VSEL_MASK 0x1f
+#define RK818_LDO_VSEL_MASK 0x1f
+#define RK818_LDO3_ON_VSEL_MASK 0xf
+#define RK818_BOOST_ON_VSEL_MASK 0xe0
+
/* Ramp rate definitions for buck1 / buck2 only */
#define RK808_RAMP_RATE_OFFSET 3
#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET)
@@ -87,6 +96,15 @@ static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
};
+static const struct regulator_linear_range rk818_buck4_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1800000, 0, 18, 100000),
+};
+
+static const struct regulator_linear_range rk818_boost_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(4700000, 0, 7, 100000),
+};
+
+
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -506,6 +524,238 @@ static const struct regulator_desc rk808_reg[] = {
},
};
+static const struct regulator_desc rk818_reg[] = {
+ {
+ .name = "DCDC_REG1",
+ .supply_name = "vcc1",
+ .id = RK818_ID_DCDC1,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 64,
+ .linear_ranges = rk808_buck_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
+ .vsel_reg = RK818_BUCK1_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(0),
+ .owner = THIS_MODULE,
+ }, {
+ .name = "DCDC_REG2",
+ .supply_name = "vcc2",
+ .id = RK818_ID_DCDC2,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 64,
+ .linear_ranges = rk808_buck_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
+ .vsel_reg = RK818_BUCK2_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(1),
+ .owner = THIS_MODULE,
+ }, {
+ .name = "DCDC_REG3",
+ .supply_name = "vcc3",
+ .id = RK818_ID_DCDC3,
+ .ops = &rk808_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 1,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(2),
+ .owner = THIS_MODULE,
+ }, {
+ .name = "DCDC_REG4",
+ .supply_name = "vcc4",
+ .id = RK818_ID_DCDC4,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 19,
+ .linear_ranges = rk818_buck4_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk818_buck4_voltage_ranges),
+ .vsel_reg = RK818_BUCK4_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK4_VSEL_MASK,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(3),
+ .owner = THIS_MODULE,
+ }, {
+ .name = "DCDC_BOOST",
+ .supply_name = "boost",
+ .id = RK818_ID_BOOST,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 8,
+ .linear_ranges = rk818_boost_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk818_boost_voltage_ranges),
+ .vsel_reg = RK818_BOOST_LDO9_ON_VSEL_REG,
+ .vsel_mask = RK818_BOOST_ON_VSEL_MASK,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(4),
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO_REG1",
+ .supply_name = "vcc6",
+ .id = RK818_ID_LDO1,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 17,
+ .linear_ranges = rk808_ldo_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
+ .vsel_reg = RK818_LDO1_ON_VSEL_REG,
+ .vsel_mask = RK818_LDO_VSEL_MASK,
+ .enable_reg = RK818_LDO_EN_REG,
+ .enable_mask = BIT(0),
+ .enable_time = 400,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO_REG2",
+ .supply_name = "vcc6",
+ .id = RK818_ID_LDO2,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 17,
+ .linear_ranges = rk808_ldo_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
+ .vsel_reg = RK818_LDO2_ON_VSEL_REG,
+ .vsel_mask = RK818_LDO_VSEL_MASK,
+ .enable_reg = RK818_LDO_EN_REG,
+ .enable_mask = BIT(1),
+ .enable_time = 400,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO_REG3",
+ .supply_name = "vcc7",
+ .id = RK818_ID_LDO3,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 16,
+ .linear_ranges = rk808_ldo3_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
+ .vsel_reg = RK818_LDO3_ON_VSEL_REG,
+ .vsel_mask = RK818_LDO3_ON_VSEL_MASK,
+ .enable_reg = RK818_LDO_EN_REG,
+ .enable_mask = BIT(2),
+ .enable_time = 400,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO_REG4",
+ .supply_name = "vcc8",
+ .id = RK818_ID_LDO4,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 17,
+ .linear_ranges = rk808_ldo_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
+ .vsel_reg = RK818_LDO4_ON_VSEL_REG,
+ .vsel_mask = RK818_LDO_VSEL_MASK,
+ .enable_reg = RK818_LDO_EN_REG,
+ .enable_mask = BIT(3),
+ .enable_time = 400,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO_REG5",
+ .supply_name = "vcc7",
+ .id = RK818_ID_LDO5,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 17,
+ .linear_ranges = rk808_ldo_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
+ .vsel_reg = RK818_LDO5_ON_VSEL_REG,
+ .vsel_mask = RK818_LDO_VSEL_MASK,
+ .enable_reg = RK818_LDO_EN_REG,
+ .enable_mask = BIT(4),
+ .enable_time = 400,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO_REG6",
+ .supply_name = "vcc8",
+ .id = RK818_ID_LDO6,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 18,
+ .linear_ranges = rk808_ldo6_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
+ .vsel_reg = RK818_LDO6_ON_VSEL_REG,
+ .vsel_mask = RK818_LDO_VSEL_MASK,
+ .enable_reg = RK818_LDO_EN_REG,
+ .enable_mask = BIT(5),
+ .enable_time = 400,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO_REG7",
+ .supply_name = "vcc7",
+ .id = RK818_ID_LDO7,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 18,
+ .linear_ranges = rk808_ldo6_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
+ .vsel_reg = RK818_LDO7_ON_VSEL_REG,
+ .vsel_mask = RK818_LDO_VSEL_MASK,
+ .enable_reg = RK818_LDO_EN_REG,
+ .enable_mask = BIT(6),
+ .enable_time = 400,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO_REG8",
+ .supply_name = "vcc8",
+ .id = RK818_ID_LDO8,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 17,
+ .linear_ranges = rk808_ldo_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
+ .vsel_reg = RK818_LDO8_ON_VSEL_REG,
+ .vsel_mask = RK818_LDO_VSEL_MASK,
+ .enable_reg = RK818_LDO_EN_REG,
+ .enable_mask = BIT(7),
+ .enable_time = 400,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "LDO_REG9",
+ .supply_name = "vcc9",
+ .id = RK818_ID_LDO9,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 17,
+ .linear_ranges = rk808_ldo_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
+ .vsel_reg = RK818_BOOST_LDO9_ON_VSEL_REG,
+ .vsel_mask = RK818_LDO_VSEL_MASK,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(5),
+ .enable_time = 400,
+ .owner = THIS_MODULE,
+ }, {
+ .name = "SWITCH_REG",
+ .supply_name = "vcc9",
+ .id = RK818_ID_SWITCH,
+ .ops = &rk808_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(6),
+ .owner = THIS_MODULE,
+ }, {
+ .name = "HDMI_SWITCH",
+ .supply_name = "h_5v",
+ .id = RK818_ID_HDMI_SWITCH,
+ .ops = &rk808_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .enable_reg = RK818_H5V_EN_REG,
+ .enable_mask = BIT(0),
+ .owner = THIS_MODULE,
+ }, {
+ .name = "OTG_SWITCH",
+ .supply_name = "usb",
+ .id = RK818_ID_OTG_SWITCH,
+ .ops = &rk808_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(7),
+ .owner = THIS_MODULE,
+ },
+};
+
static struct of_regulator_match rk808_reg_matches[] = {
[RK808_ID_DCDC1] = { .name = "DCDC_REG1" },
[RK808_ID_DCDC2] = { .name = "DCDC_REG2" },
@@ -523,11 +773,32 @@ static struct of_regulator_match rk808_reg_matches[] = {
[RK808_ID_SWITCH2] = { .name = "SWITCH_REG2" },
};
+static struct of_regulator_match rk818_reg_matches[] = {
+ [RK818_ID_DCDC1] = { .name = "DCDC_REG1" },
+ [RK818_ID_DCDC2] = { .name = "DCDC_REG2" },
+ [RK818_ID_DCDC3] = { .name = "DCDC_REG3" },
+ [RK818_ID_DCDC4] = { .name = "DCDC_REG4" },
+ [RK818_ID_BOOST] = { .name = "DCDC_BOOST" },
+ [RK818_ID_LDO1] = { .name = "LDO_REG1" },
+ [RK818_ID_LDO2] = { .name = "LDO_REG2" },
+ [RK818_ID_LDO3] = { .name = "LDO_REG3" },
+ [RK818_ID_LDO4] = { .name = "LDO_REG4" },
+ [RK818_ID_LDO5] = { .name = "LDO_REG5" },
+ [RK818_ID_LDO6] = { .name = "LDO_REG6" },
+ [RK818_ID_LDO7] = { .name = "LDO_REG7" },
+ [RK818_ID_LDO8] = { .name = "LDO_REG8" },
+ [RK818_ID_LDO9] = { .name = "LDO_REG9" },
+ [RK818_ID_SWITCH] = { .name = "SWITCH_REG" },
+ [RK818_ID_HDMI_SWITCH] = { .name = "HDMI_SWITCH" },
+ [RK818_ID_OTG_SWITCH] = { .name = "OTG_SWITCH" },
+};
+
static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct device *client_dev,
struct regmap *map,
struct rk808_regulator_data *pdata)
{
+ struct rk808 *rk808 = dev_get_drvdata(dev->parent);
struct device_node *np;
int tmp, ret, i;
@@ -535,8 +806,12 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev,
if (!np)
return -ENXIO;
- ret = of_regulator_match(dev, np, rk808_reg_matches,
- RK808_NUM_REGULATORS);
+ if (rk808->variant == RK808_ID)
+ ret = of_regulator_match(dev, np, rk808_reg_matches,
+ RK808_NUM_REGULATORS);
+ else if (rk808->variant == RK818_ID)
+ ret = of_regulator_match(dev, np, rk818_reg_matches,
+ RK818_NUM_REGULATORS);
if (ret < 0)
goto dt_parse_end;
@@ -586,27 +861,53 @@ static int rk808_regulator_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pdata);
- /* Instantiate the regulators */
- for (i = 0; i < RK808_NUM_REGULATORS; i++) {
- if (!rk808_reg_matches[i].init_data ||
- !rk808_reg_matches[i].of_node)
- continue;
-
- config.dev = &client->dev;
- config.driver_data = pdata;
- config.regmap = rk808->regmap;
- config.of_node = rk808_reg_matches[i].of_node;
- config.init_data = rk808_reg_matches[i].init_data;
-
- rk808_rdev = devm_regulator_register(&pdev->dev,
- &rk808_reg[i], &config);
- if (IS_ERR(rk808_rdev)) {
- dev_err(&client->dev,
- "failed to register %d regulator\n", i);
- return PTR_ERR(rk808_rdev);
+ if (rk808->variant == RK818_ID) {
+ /* Instantiate the regulators */
+ for (i = 0; i < RK818_NUM_REGULATORS; i++) {
+ if (!rk818_reg_matches[i].init_data ||
+ !rk818_reg_matches[i].of_node)
+ continue;
+
+ config.dev = &client->dev;
+ config.driver_data = pdata;
+ config.regmap = rk808->regmap;
+ config.of_node = rk818_reg_matches[i].of_node;
+ config.init_data = rk818_reg_matches[i].init_data;
+
+ rk808_rdev = devm_regulator_register(&pdev->dev,
+ &rk818_reg[i], &config);
+ if (IS_ERR(rk808_rdev)) {
+ dev_err(&client->dev,
+ "failed to register %d regulator\n", i);
+ return PTR_ERR(rk808_rdev);
+ }
+ }
+ } else if (rk808->variant == RK808_ID) {
+ /* Instantiate the regulators */
+ for (i = 0; i < RK808_NUM_REGULATORS; i++) {
+ if (!rk808_reg_matches[i].init_data ||
+ !rk808_reg_matches[i].of_node)
+ continue;
+
+ config.dev = &client->dev;
+ config.driver_data = pdata;
+ config.regmap = rk808->regmap;
+ config.of_node = rk808_reg_matches[i].of_node;
+ config.init_data = rk808_reg_matches[i].init_data;
+
+ rk808_rdev = devm_regulator_register(&pdev->dev,
+ &rk808_reg[i], &config);
+ if (IS_ERR(rk808_rdev)) {
+ dev_err(&client->dev,
+ "failed to register %d regulator\n", i);
+ return PTR_ERR(rk808_rdev);
+ }
}
+ } else {
+ dev_err(&client->dev, "unsupported RK8XX ID %lu\n",
+ rk808->variant);
+ return -EINVAL;
}
-
return 0;
}
--
1.9.1
More information about the Linux-rockchip
mailing list