February 2015 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sun Feb 1 16:45:04 PST 2015
Ending: Sat Feb 28 23:27:12 PST 2015
Messages: 168

• [PATCH] drm/rockchip: vop: power off until vop standby take effect   Mark yao
• [PATCH v2] drm/rockchip: vop: power off until vop standby take effect   Mark Yao
• [PATCH] drm/rockchip: vop: power off until vop standby take effect   Daniel Kurtz
• [PATCH] drm/rockchip: fix clk enable disable mismatch in vop_crtc_mode_set   Daniel Kurtz
• [PATCH] drm/rockchip: vop: power off until vop standby take effect   Mark yao
• [PATCH v3] drm/rockchip: vop: power off until vop standby take effect   Mark Yao
• [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()   addy ke
• [PATCH] drm/rockchip: vop: power off until vop standby take effect   Daniel Vetter
• [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()   Ulf Hansson
• [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()   Ulf Hansson
• [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()   addy ke
• [PATCH v3 0/15] Those patches is used for dw_hdmi audio support   Yakir Yang
• [PATCH v3 01/15] drm: bridge/dw_hdmi: add irq control to suspend/resume   Yakir Yang
• [PATCH v3 02/15] drm: bridge/dw_hdmi: wrap irq control in fucntions   Yakir Yang
• [PATCH v3 03/15] drm: rockchip/dw_hdmi_rockchip: add resume/suspend support   Yakir Yang
• [PATCH v3 04/15] drm: bridge/dw_hdmi: add indentification registers parse and record   Yakir Yang
• [PATCH v3 05/15] drm: bridge/dw_hdmi: combine hdmi_set_clock_regenerator_n() and hdmi_regenerate_cts()   Yakir Yang
• [PATCH v3 06/15] drm: bridge/dw_hdmi: adjust n/cts setting order   Yakir Yang
• [PATCH v3 07/15] drm: bridge/dw_hdmi: set ncts_atomic_write & cts_manual   Yakir Yang
• [PATCH v3 08/15] drm: bridge/dw_hdmi: add audio support for more display resolutions   Yakir Yang
• [PATCH v3 09/15] drm: bridge/dw_hdmi: enable audio support for No-CEA display resolutions   Yakir Yang
• [PATCH v3 10/15] drm: bridge/dw_hdmi: add audio sample channel status setting   Yakir Yang
• [PATCH v3 11/15] drm: bridge/dw_hdmi: add audio clock control interfaces   Yakir Yang
• [PATCH v3 12/15] drm: bridge/dw_hdmi: creat dw-hdmi-audio platform device   Yakir Yang
• [PATCH v3 13/15] ASoC: dw-hdmi-audio: add codec driver for dw hdmi audio   Yakir Yang
• [PATCH v3 14/15] ASoC: rockchip-hdmi-audio: add sound driver for hdmi audio   Yakir Yang
• [PATCH v3 15/15] dt-bindings: Add documentation for Rockchip dw-hdmi-audio   Yakir Yang
• [PATCH] drm/rockchip: vop: power off until vop standby take effect   Mark yao
• [PATCH v4] drm/rockchip: vop: power off until vop standby take effect   Mark Yao
• [PATCH] drm/rockchip: vop: power off until vop standby take effect   Daniel Kurtz
• [PATCH] drm/rockchip: vop: power off until vop standby take effect   Mark yao
• [PATCH v5] drm/rockchip: vop: power off until vop standby take effect   Mark Yao
• [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()   Ulf Hansson
• [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()   Jaehoon Chung
• [PATCH] mmc: core: add runtime-resume caps to support resume at runtime_resume   Addy Ke
• [PATCH] mmc: dw_mmc: fix bug that cause 'Timeout sending command'   Addy Ke
• [PATCH] mmc: core: add runtime-resume caps to support resume at runtime_resume   Heiko Stübner
• [PATCH] mmc: core: add runtime-resume caps to support resume at runtime_resume   Mark Rutland
• [PATCH v2] mmc: core: add runtime-resume caps to support resume at runtime_resume   Addy Ke
• [PATCH v3 04/15] drm: bridge/dw_hdmi: add indentification registers parse and record   Daniel Kurtz
• [PATCH v3 05/15] drm: bridge/dw_hdmi: combine hdmi_set_clock_regenerator_n() and hdmi_regenerate_cts()   Daniel Kurtz
• [PATCH] usb: dwc2: Register interrupt handler only once gadget is correctly initialized   Romain Perier
• [PATCH] usb: dwc2: Register interrupt handler only once gadget is correctly initialized   Sergei Shtylyov
• [GIT PULL] ARM: rockchip: third (and last) batch of dts updates for 3.20   Olof Johansson
• [PATCH v2] usb: dwc2: Register interrupt handler only once gadget is correctly initialized   Romain Perier
• [PATCH v3 05/15] drm: bridge/dw_hdmi: combine hdmi_set_clock_regenerator_n() and hdmi_regenerate_cts()   yakir
• [PATCH v3 04/15] drm: bridge/dw_hdmi: add indentification registers parse and record   yakir
• [PATCH] mmc: dw_mmc: fix bug that cause 'Timeout sending command'   Ulf Hansson
• [PATCH] mmc: dw_mmc: fix bug that cause 'Timeout sending command'   Addy
• [PATCH] mmc: dw_mmc: fix bug that cause 'Timeout sending command'   Jaehoon Chung
• [PATCH v2 0/2] about data busy   Addy Ke
• [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'   Addy Ke
• [PATCH v2 2/2] mmc: dw_mmc: Don't start command while data busy   Addy Ke
• [PATCH] mmc: dw_mmc: fix bug that cause 'Timeout sending command'   addy ke
• [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'   Jaehoon Chung
• [PATCH] CHROMIUM: iommu: rockchip: Make sure that page table state is coherent   Tomasz Figa
• [PATCH] CHROMIUM: iommu: rockchip: Make sure that page table state is coherent   Tomasz Figa
• [PATCH 1/2] ARM: rockchip: decrease the wait time for resume   Chris Zhong
• [PATCH 2/2] ARM: rockchip: disable watchdog during suspend   Chris Zhong
• [PATCH 0/2] Support disable the wakeup event of gpio-charger   Chris Zhong
• [PATCH 1/2] dt-bindings: add disable-wakeup property for gpio-charger   Chris Zhong
• [PATCH 2/2] power: gpio-charger: support disable the wakeup event   Chris Zhong
• [PATCH 2/2] power: gpio-charger: support disable the wakeup event   Dmitry Eremin-Solenikov
• [PATCH] mmc: dw_mmc: fix bug that cause mmc_test failture   Olof Johansson
• [PATCH 2/2] power: gpio-charger: support disable the wakeup event   Chris Zhong
• [PATCH 1/2] dt-bindings: add disable-wakeup property for gpio-charger   Mark Rutland
• [PATCH 1/2] dt-bindings: add disable-wakeup property for gpio-charger   Heiko Stübner
• [PATCH 1/2] dt-bindings: add disable-wakeup property for gpio-charger   Mark Rutland
• [RFC PATCH 0/3]   Yakir Yang
• [RFC PATCH 1/3] drm: bridge/dw_hdmi: fixed codec style   Yakir Yang
• [RFC PATCH 2/3] drm: bridge/dw_hdmi_rockchip: improve hdmi eye-diagram test   Yakir Yang
• [RFC PATCH 0/1] Improve eye-diagram & single-ended test for rk3288 hdmi   Yakir Yang
• [RFC PATCH 3/3] drm: bridge/dw_hdmi: improve hdmi single-end test   Yakir Yang
• We are good at produce conductors and cables   Golden. Horse
• [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'   Alim Akhtar
• [PATCH] CHROMIUM: iommu: rockchip: Make sure that page table state is coherent   Heiko Stübner
• [PATCH] dmaengine: pl330: fix bug that cause start the same descs in cyclic   Vinod Koul
• [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'   Addy
• [PATCH] mmc: dw_mmc: fix bug that cause mmc_test failture   Addy
• [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'   Addy
• [PATCH v2] usb: dwc2: Register interrupt handler only once gadget is correctly initialized   Romain Perier
• [PATCH 09/11] ARM: rockchip: make rockchip_suspend_init conditional   Arnd Bergmann
• [PATCH v2] usb: dwc2: Register interrupt handler only once gadget is correctly initialized   John Youn
• [PATCH v2] usb: dwc2: Register interrupt handler only once gadget is correctly initialized   Romain Perier
• [PATCH] mmc: dw_mmc: rockchip: add support MMC_CAP_RUNTIME_RESUME capability   Addy Ke
• [PATCH v3 0/3] about data busy   Addy Ke
• [PATCH v3 1/3] mmc: dw_mmc: update clock after host reach a stable voltage   Addy Ke
• [PATCH v3 2/3] mmc: dw_mmc: fix bug that cause 'Timeout sending command'   Addy Ke
• [PATCH v3 3/3] mmc: dw_mmc: Don't start command while data busy   Addy Ke
• [PATCH 09/11] ARM: rockchip: make rockchip_suspend_init conditional   Heiko Stübner
• [PATCH v4 0/3] about data busy   Addy Ke
• [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage   Addy Ke
• [PATCH v4 2/3] mmc: dw_mmc: fix bug that cause 'Timeout sending command'   Addy Ke
• [PATCH v4 3/3] mmc: dw_mmc: Don't start command while data busy   Addy Ke
• [PATCH v4 0/3] about data busy   Javier Martinez Canillas
• [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage   Alim Akhtar
• [PATCH v4 0/3] about data busy   Jaehoon Chung
• [PATCH v4 0/3] about data busy   Javier Martinez Canillas
• [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage   addy ke
• [PATCH v4 0/3] about data busy   addy ke
• [PATCH] mmc: dw_mmc: rockchip: add support MMC_CAP_RUNTIME_RESUME capability   Doug Anderson
• [PATCH v7 0/5] Patches to add support for Rockchip usb PHYs.   Heiko Stübner
• [PATCH] mmc: dw_mmc: fix bug that cause mmc_test failture   Doug Anderson
• [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage   Doug Anderson
• [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage   Russell King - ARM Linux
• [PATCH v4 3/3] mmc: dw_mmc: Don't start command while data busy   Doug Anderson
• [PATCH v4 0/3] add support for Firefly-RK3288 and Rayeager PX2 boards   Heiko Stübner
• [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage   Doug Anderson
• [PATCH v2] mmc: dw_mmc: rockchip: add support MMC_CAP_RUNTIME_RESUME capability   Addy Ke
• [PATCH v2] mmc: dw_mmc: fix bug that cause mmc_test failture   Addy Ke
• [PATCH v4 0/3] about data busy   Doug Anderson
• [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage   Doug Anderson
• [PATCH v2] mmc: dw_mmc: fix bug that cause mmc_test failture   Doug Anderson
• [PATCH] regulator: rk808: Set the enable time for LDOs   Doug Anderson
• [PATCH v2] usb: dwc2: Register interrupt handler only once gadget is correctly initialized   John Youn
• [PATCH] regulator: rk808: Set the enable time for LDOs   Mark Brown
• [PATCH] ARM: rockchip: Constify struct regmap_config and staticize local function   Krzysztof Kozlowski
• [PATCH] mmc: dw_mmc: rockchip: Add DW_MCI_QUIRK_RETRY_DELAY   Doug Anderson
• [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage   Alim Akhtar
• [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage   Jaehoon Chung
• [PATCH v2] mmc: dw_mmc: rockchip: add support MMC_CAP_RUNTIME_RESUME capability   Jaehoon Chung
• [PATCH 1/2] mmc: dw_mmc: Only enable CD after setup and only if needed   Doug Anderson
• [PATCH 2/2] mmc: dw_mmc: Don't crash if we get an interrupt before slot has initted   Doug Anderson
• [PATCH v2] mmc: dw_mmc: fix bug that cause mmc_test failture   Javier Martinez Canillas
• [PATCH 1/2] mmc: dw_mmc: Only enable CD after setup and only if needed   Javier Martinez Canillas
• [PATCH 2/2] mmc: dw_mmc: Don't crash if we get an interrupt before slot has initted   Javier Martinez Canillas
• [PATCH v3 1/3] mmc: core: Add mmc_regulator_set_vqmmc()   Doug Anderson
• [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage   Doug Anderson
• [PATCH 2/2] rockchip: efuse: add efuse driver for rk3288 efuse   Heiko Stübner
• [PATCH 0/2] backlight: pwm: Add backlight-boot-off property   huang lin
• [PATCH 1/2] Documentation: devicetree: add backlight-boot-off property in pwm-backlight   huang lin
• [PATCH 2/2] backlight: pwm: Add backlight-boot-off property   huang lin
• [PATCH 2/2] backlight: pwm: Add backlight-boot-off property   Ajay kumar
• [PATCH 2/2] backlight: pwm: Add backlight-boot-off property   hl
• [PATCH 2/2] backlight: pwm: Add backlight-boot-off property   Ajay kumar
• [PATCH 00/11] drm/rockchip: add support for lvds controller and external encoders   Heiko Stübner
• [PATCH 02/11] drm: add bindings for simple vga encoders   Laurent Pinchart
• [PATCH 03/11] drm: add driver for simple vga encoders   Laurent Pinchart
• [PATCH 04/11] dt-bindings: Add documentation for rockchip lvds   Laurent Pinchart
• [PATCH 03/11] drm: add driver for simple vga encoders   Rob Herring
• [PATCH v2] mmc: dw_mmc: fix bug that cause mmc_test failture   Jaehoon Chung
• [PATCH 0/2] add dts for PopMetal board   Andy Yan
• [PATCH 1/2] dt-bindings: add root compatible property for PopMetal board   Andy Yan
• [PATCH 2/2] ARM: dts: add rk3288 PopMetal board   Andy Yan
• [PATCH 2/2] spi/rockchip: do an error handling in proper time   Andy Shevchenko
• [PATCH 03/11] drm: add driver for simple vga encoders   Heiko Stübner
• [PATCH v5] drm/panel: Add support for AUO b101ean01 panel   huang lin
• [PATCH] mfd: rk808: disable the under voltage detect   Chris Zhong
• [PATCH 1/2] dt-bindings: add root compatible property for PopMetal board   Heiko Stübner
• [PATCH 2/2] ARM: dts: add rk3288 PopMetal board   Heiko Stübner
• [PATCH v4 0/15] Those patches is used for dw_hdmi audio support   Yakir Yang
• [PATCH v4 01/15] drm: bridge/dw_hdmi: add irq control to suspend/resume   Yakir Yang
• [PATCH v4 02/15] drm: bridge/dw_hdmi: wrap irq control in fucntions   Yakir Yang
• [PATCH v4 03/15] drm: rockchip/dw_hdmi_rockchip: add resume/suspend support   Yakir Yang
• [PATCH v4 04/15] drm: bridge/dw_hdmi: add identification registers parse and record   Yakir Yang
• [PATCH v4 05/15] drm: bridge/dw_hdmi: combine hdmi_set_clock_regenerator_n() and hdmi_regenerate_cts()   Yakir Yang
• [PATCH v4 06/15] drm: bridge/dw_hdmi: adjust n/cts setting order   Yakir Yang
• [PATCH v4 07/15] drm: bridge/dw_hdmi: set ncts_atomic_write & cts_manual   Yakir Yang
• [PATCH v4 08/15] drm: bridge/dw_hdmi: add audio support for more display resolutions   Yakir Yang
• [PATCH v4 09/15] drm: bridge/dw_hdmi: enable audio support for No-CEA display resolutions   Yakir Yang
• [PATCH v4 10/15] drm: bridge/dw_hdmi: add audio sample channel status setting   Yakir Yang
• [PATCH v4 11/15] drm: bridge/dw_hdmi: add enable/disable to dw_hdmi_audio callbacks   Yakir Yang
• [PATCH v4 12/15] drm: bridge/dw_hdmi: creat dw-hdmi-audio platform device   Yakir Yang
• [PATCH v4 13/15] ASoC: codec/dw-hdmi-audio: add codec driver for dw hdmi audio   Yakir Yang
• [PATCH v4 14/15] ASoC: rockchip/rockchip-hdmi-audio: add sound driver for hdmi audio   Yakir Yang
• [PATCH v4 15/15] dt-bindings: Add documentation for Rockchip dw-hdmi-audio   Yakir Yang
• [PATCH 1/2] dt-bindings: add root compatible property for PopMetal board   Andy Yan
• [PATCH 2/2] ARM: dts: add rk3288 PopMetal board   Andy Yan

Last message date: Sat Feb 28 23:27:12 PST 2015
Archived on: Sat Feb 28 23:27:55 PST 2015

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...