[PATCH v7 1/6] PCI: spacemit-k1: Add device data support

[Inochi Amaoto]

On Mon, Oct 19, 2026 at 11:41:08AM -0500, Bjorn Helgaas wrote:
> On Tue, Sep 29, 2026 at 04:37:47PM +0800, Inochi Amaoto wrote:
> > To reuse the K1 PCIe driver logic for K3 PCIe controller, add device
> > data to handle the K1 specific logic and make room for the incoming
> > logic for K3.
> > 
> > Signed-off-by: Inochi Amaoto <inochiama at gmail.com>
> > ---
> >  drivers/pci/controller/dwc/pcie-spacemit-k1.c | 30 ++++++++++++++++---
> >  1 file changed, 26 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/dwc/pcie-spacemit-k1.c b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
> > index 0564c46e2f48..ab2953ad8f56 100644
> > --- a/drivers/pci/controller/dwc/pcie-spacemit-k1.c
> > +++ b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
> > @@ -45,8 +45,17 @@
> >  #define PCIE_CONTROL_LOGIC			0x0004
> >  #define PCIE_SOFT_RESET			BIT(0)
> >  
> > +struct k1_pcie;
> > +
> > +struct k1_pcie_device_data {
> > +	const struct dw_pcie_host_ops *host_ops;
> > +	const struct dw_pcie_ops *ops;
> > +	int (*parse_port)(struct k1_pcie *k1);
> > +};
> 
> Does the "const" here add anything useful?  This patch suggests maybe
> not:
> 
>   https://lore.kernel.org/all/20260911233541.1650895-2-james.quinlan@broadcom.com/
> 

I am not sure whether the compiler can make use it.
And I have not seen any explaination for why no reason
for that. It is good to have a clarification.

Regards,
Inochi


> > +
> >  struct k1_pcie {
> >  	struct dw_pcie pci;
> > +	const struct k1_pcie_device_data *data;
> >  	struct phy *phy;
> >  	void __iomem *link;
> >  	struct regmap *pmu;	/* Errors ignored; MMIO-backed regmap */
> > @@ -274,14 +283,21 @@ static int k1_pcie_parse_port(struct k1_pcie *k1)
> >  
> >  static int k1_pcie_probe(struct platform_device *pdev)
> >  {
> > +	const struct k1_pcie_device_data *data;
> >  	struct device *dev = &pdev->dev;
> >  	struct k1_pcie *k1;
> >  	int ret;
> >  
> > +	data = device_get_match_data(dev);
> > +	if (!data)
> > +		return -ENODATA;
> > +
> >  	k1 = devm_kzalloc(dev, sizeof(*k1), GFP_KERNEL);
> >  	if (!k1)
> >  		return -ENOMEM;
> >  
> > +	k1->data = data;
> > +
> >  	k1->pmu = syscon_regmap_lookup_by_phandle_args(dev_of_node(dev),
> >  						       SYSCON_APMU, 1,
> >  						       &k1->pmu_off);
> > @@ -295,11 +311,11 @@ static int k1_pcie_probe(struct platform_device *pdev)
> >  				     "failed to map \"link\" registers\n");
> >  
> >  	k1->pci.dev = dev;
> > -	k1->pci.ops = &k1_pcie_ops;
> > +	k1->pci.ops = data->ops;
> >  	k1->pci.pp.num_vectors = MAX_MSI_IRQS;
> >  	dw_pcie_cap_set(&k1->pci, REQ_RES);
> >  
> > -	k1->pci.pp.ops = &k1_pcie_host_ops;
> > +	k1->pci.pp.ops = data->host_ops;
> >  
> >  	/* Hold the PHY in reset until we start the link */
> >  	regmap_set_bits(k1->pmu, k1->pmu_off + PCIE_CLK_RESET_CONTROL,
> > @@ -316,7 +332,7 @@ static int k1_pcie_probe(struct platform_device *pdev)
> >  
> >  	platform_set_drvdata(pdev, k1);
> >  
> > -	ret = k1_pcie_parse_port(k1);
> > +	ret = data->parse_port(k1);
> >  	if (ret)
> >  		return dev_err_probe(dev, ret, "failed to parse root port\n");
> >  
> > @@ -334,8 +350,14 @@ static void k1_pcie_remove(struct platform_device *pdev)
> >  	dw_pcie_host_deinit(&k1->pci.pp);
> >  }
> >  
> > +static const struct k1_pcie_device_data k1_pcie_device_data = {
> > +	.host_ops	= &k1_pcie_host_ops,
> > +	.ops		= &k1_pcie_ops,
> > +	.parse_port	= k1_pcie_parse_port,
> > +};
> > +
> >  static const struct of_device_id k1_pcie_of_match_table[] = {
> > -	{ .compatible = "spacemit,k1-pcie", },
> > +	{ .compatible = "spacemit,k1-pcie", .data = &k1_pcie_device_data },
> >  	{ }
> >  };
> >  MODULE_DEVICE_TABLE(of, k1_pcie_of_match_table);
> > -- 
> > 2.55.0
> >