[PATCH v7 1/6] PCI: spacemit-k1: Add device data support

[Bjorn Helgaas]

On Tue, Sep 29, 2026 at 04:37:47PM +0800, Inochi Amaoto wrote:
> To reuse the K1 PCIe driver logic for K3 PCIe controller, add device
> data to handle the K1 specific logic and make room for the incoming
> logic for K3.
> 
> Signed-off-by: Inochi Amaoto <inochiama at gmail.com>
> ---
>  drivers/pci/controller/dwc/pcie-spacemit-k1.c | 30 ++++++++++++++++---
>  1 file changed, 26 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-spacemit-k1.c b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
> index 0564c46e2f48..ab2953ad8f56 100644
> --- a/drivers/pci/controller/dwc/pcie-spacemit-k1.c
> +++ b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
> @@ -45,8 +45,17 @@
>  #define PCIE_CONTROL_LOGIC			0x0004
>  #define PCIE_SOFT_RESET			BIT(0)
>  
> +struct k1_pcie;
> +
> +struct k1_pcie_device_data {
> +	const struct dw_pcie_host_ops *host_ops;
> +	const struct dw_pcie_ops *ops;
> +	int (*parse_port)(struct k1_pcie *k1);
> +};

Does the "const" here add anything useful?  This patch suggests maybe
not:

  https://lore.kernel.org/all/20260911233541.1650895-2-james.quinlan@broadcom.com/

> +
>  struct k1_pcie {
>  	struct dw_pcie pci;
> +	const struct k1_pcie_device_data *data;
>  	struct phy *phy;
>  	void __iomem *link;
>  	struct regmap *pmu;	/* Errors ignored; MMIO-backed regmap */
> @@ -274,14 +283,21 @@ static int k1_pcie_parse_port(struct k1_pcie *k1)
>  
>  static int k1_pcie_probe(struct platform_device *pdev)
>  {
> +	const struct k1_pcie_device_data *data;
>  	struct device *dev = &pdev->dev;
>  	struct k1_pcie *k1;
>  	int ret;
>  
> +	data = device_get_match_data(dev);
> +	if (!data)
> +		return -ENODATA;
> +
>  	k1 = devm_kzalloc(dev, sizeof(*k1), GFP_KERNEL);
>  	if (!k1)
>  		return -ENOMEM;
>  
> +	k1->data = data;
> +
>  	k1->pmu = syscon_regmap_lookup_by_phandle_args(dev_of_node(dev),
>  						       SYSCON_APMU, 1,
>  						       &k1->pmu_off);
> @@ -295,11 +311,11 @@ static int k1_pcie_probe(struct platform_device *pdev)
>  				     "failed to map \"link\" registers\n");
>  
>  	k1->pci.dev = dev;
> -	k1->pci.ops = &k1_pcie_ops;
> +	k1->pci.ops = data->ops;
>  	k1->pci.pp.num_vectors = MAX_MSI_IRQS;
>  	dw_pcie_cap_set(&k1->pci, REQ_RES);
>  
> -	k1->pci.pp.ops = &k1_pcie_host_ops;
> +	k1->pci.pp.ops = data->host_ops;
>  
>  	/* Hold the PHY in reset until we start the link */
>  	regmap_set_bits(k1->pmu, k1->pmu_off + PCIE_CLK_RESET_CONTROL,
> @@ -316,7 +332,7 @@ static int k1_pcie_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, k1);
>  
> -	ret = k1_pcie_parse_port(k1);
> +	ret = data->parse_port(k1);
>  	if (ret)
>  		return dev_err_probe(dev, ret, "failed to parse root port\n");
>  
> @@ -334,8 +350,14 @@ static void k1_pcie_remove(struct platform_device *pdev)
>  	dw_pcie_host_deinit(&k1->pci.pp);
>  }
>  
> +static const struct k1_pcie_device_data k1_pcie_device_data = {
> +	.host_ops	= &k1_pcie_host_ops,
> +	.ops		= &k1_pcie_ops,
> +	.parse_port	= k1_pcie_parse_port,
> +};
> +
>  static const struct of_device_id k1_pcie_of_match_table[] = {
> -	{ .compatible = "spacemit,k1-pcie", },
> +	{ .compatible = "spacemit,k1-pcie", .data = &k1_pcie_device_data },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, k1_pcie_of_match_table);
> -- 
> 2.55.0
>