[PATCH 3/4] riscv: dts: th1520-lichee-module-4a: Cleanup with dt-check-style

[Kanak Shilledar]

Fix warnings thrown by krzk's recent updates to the dt-check-style
tool when run with strict mode. Fix the following warnings:

	thead/th1520-lichee-module-4a.dtsi:62: [property-order] property 'pinctrl-names' must be placed after 'pinctrl-0'
	thead/th1520-lichee-module-4a.dtsi:66: [required-blank-lines] "status" must be preceded by a blank line
	thead/th1520-lichee-module-4a.dtsi:129: [child-name-order] child node 'rx-pins' out of name order

After this patch, there are no more warnings left. Fix these warnings
to make the file more readable and maintainable along with that to
make it more compliant with the devicetree specifications.

Signed-off-by: Kanak Shilledar <kanak.shilledar at axis.com>
---
 .../boot/dts/thead/th1520-lichee-module-4a.dtsi    | 56 ++++++++++++----------
 1 file changed, 30 insertions(+), 26 deletions(-)

diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
index 8e76b63e0100a..e8930e994e91a 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -47,22 +47,25 @@ &emmc {
 	non-removable;
 	no-sdio;
 	no-sd;
+
 	status = "okay";
 };
 
 &gmac0 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&gmac0_pins>, <&mdio0_pins>;
+	pinctrl-names = "default";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
+
 	status = "okay";
 };
 
 &gmac1 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&gmac1_pins>;
+	pinctrl-names = "default";
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
+
 	status = "okay";
 };
 
@@ -111,21 +114,6 @@ phy1: ethernet-phy at 2 {
 
 &padctrl0_apsys {
 	gmac0_pins: gmac0-0 {
-		tx-pins {
-			pins = "GMAC0_TX_CLK",
-			       "GMAC0_TXEN",
-			       "GMAC0_TXD0",
-			       "GMAC0_TXD1",
-			       "GMAC0_TXD2",
-			       "GMAC0_TXD3";
-			function = "gmac0";
-			bias-disable;
-			drive-strength = <25>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-
 		rx-pins {
 			pins = "GMAC0_RX_CLK",
 			       "GMAC0_RXDV",
@@ -140,24 +128,24 @@ rx-pins {
 			input-schmitt-disable;
 			slew-rate = <0>;
 		};
-	};
 
-	gmac1_pins: gmac1-0 {
 		tx-pins {
-			pins = "GPIO2_18", /* GMAC1_TX_CLK */
-			       "GPIO2_20", /* GMAC1_TXEN */
-			       "GPIO2_21", /* GMAC1_TXD0 */
-			       "GPIO2_22", /* GMAC1_TXD1 */
-			       "GPIO2_23", /* GMAC1_TXD2 */
-			       "GPIO2_24"; /* GMAC1_TXD3 */
-			function = "gmac1";
+			pins = "GMAC0_TX_CLK",
+			       "GMAC0_TXEN",
+			       "GMAC0_TXD0",
+			       "GMAC0_TXD1",
+			       "GMAC0_TXD2",
+			       "GMAC0_TXD3";
+			function = "gmac0";
 			bias-disable;
 			drive-strength = <25>;
 			input-disable;
 			input-schmitt-disable;
 			slew-rate = <0>;
 		};
+	};
 
+	gmac1_pins: gmac1-0 {
 		rx-pins {
 			pins = "GPIO2_19", /* GMAC1_RX_CLK */
 			       "GPIO2_25", /* GMAC1_RXDV */
@@ -172,6 +160,21 @@ rx-pins {
 			input-schmitt-disable;
 			slew-rate = <0>;
 		};
+
+		tx-pins {
+			pins = "GPIO2_18", /* GMAC1_TX_CLK */
+			       "GPIO2_20", /* GMAC1_TXEN */
+			       "GPIO2_21", /* GMAC1_TXD0 */
+			       "GPIO2_22", /* GMAC1_TXD1 */
+			       "GPIO2_23", /* GMAC1_TXD2 */
+			       "GPIO2_24"; /* GMAC1_TXD3 */
+			function = "gmac1";
+			bias-disable;
+			drive-strength = <25>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
 	};
 
 	mdio0_pins: mdio0-0 {
@@ -200,5 +203,6 @@ mdio-pins {
 &sdio0 {
 	bus-width = <4>;
 	max-frequency = <198000000>;
+
 	status = "okay";
 };

-- 
2.43.0