[PATCH 04/25] dt-bindings: power: reset: add Metanoia MT2824 reboot

[Benoît Monin]

Document the Metanoia MT2824 reboot register, which the firmware writes
in machine mode to perform a warm system reboot. OpenSBI has a system
reset driver for it.

Originally-by: Jun Chang <jun.chang at metanoia-comm.com>
Signed-off-by: Benoît Monin <benoit.monin at bootlin.com>
---
 .../bindings/power/reset/metanoia,reboot.yaml      | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/reset/metanoia,reboot.yaml b/Documentation/devicetree/bindings/power/reset/metanoia,reboot.yaml
new file mode 100644
index 000000000000..2670fe7ab93f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/metanoia,reboot.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/metanoia,reboot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Metanoia MT2824 Reboot Controller
+
+maintainers:
+  - Jun Chang <jun.chang at metanoia-comm.com>
+
+description:
+  The Metanoia MT2824 reboot controller provides a system warm reboot through
+  a memory-mapped register. It is used by the firmware in machine mode.
+
+properties:
+  compatible:
+    const: metanoia,mt2824-reboot
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    reboot: reboot at 10000004 {
+      compatible = "metanoia,mt2824-reboot";
+      reg = <0x10000004 0x8>;
+    };

-- 
2.56.0