[PATCH 4/4] PCI: dwc: Add UltraRISC DP1000 PCIe rc driver

[Yao Zi]

On Mon, Mar 16, 2026 at 03:07:00PM +0800, Jia Wang via B4 Relay wrote:
> From: Xincheng Zhang <zhangxincheng at ultrarisc.com>
> 
> Add DP1000 soc PCIe rc driver.
> 
> Signed-off-by: Xincheng Zhang <zhangxincheng at ultrarisc.com>
> Signed-off-by: Jia Wang <wangjia at ultrarisc.com>
> ---
>  drivers/pci/controller/dwc/Kconfig           |  15 ++
>  drivers/pci/controller/dwc/Makefile          |   1 +
>  drivers/pci/controller/dwc/pcie-designware.h |  22 +++
>  drivers/pci/controller/dwc/pcie-ultrarisc.c  | 202 +++++++++++++++++++++++++++
>  4 files changed, 240 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index d0aa031397fa..0a33891bf7ef 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -548,4 +548,19 @@ config PCIE_VISCONTI_HOST
>  	  Say Y here if you want PCIe controller support on Toshiba Visconti SoC.
>  	  This driver supports TMPV7708 SoC.
>  
> +config PCIE_ULTRARISC
> +	bool "UltraRISC PCIe host controller"

Is there any reason preventing the driver being built as a module? If
no, it would be better to change it to "tristate", to allow distribution
to customize the configuration for image sizes, etc.

> +	depends on ARCH_ULTRARISC || COMPILE_TEST
> +	select PCIE_DW_HOST
> +	select PCI_MSI
> +	default y if ARCH_ULTRARISC
> +	help
> +	  Enables support for the PCIe controller in the UltraRISC SoC.
> +	  This driver supports UR-DP1000 SoC. When selected, it automatically
> +	  enables both `PCIE_DW_HOST` and `PCI_MSI`, ensuring proper support
> +	  for MSI-based interrupt handling in the PCIe controller.
> +	  By default, this symbol is enabled when `ARCH_ULTRARISC` is active,
> +	  requiring no further configuration on that platform.
> +
> +
>  endmenu
>  #define PORT_LOGIC_LTSSM_STATE_L0	0x11

Best regards,
Yao Zi