[PATCH v1 2/7] dt-bindings: PCI: starfive,jh7110-pcie: Add enable-gpios property

[Heinrich Schuchardt]

On 10/16/25 10:00, Hal Feng wrote:
> Add enable-gpios property for controlling the PCI bus device power.
> This property had been supported in the driver but not added in the
> dt-bindings.
> 
> Fixes: 22fe32239770 ("dt-bindings: PCI: Add StarFive JH7110 PCIe controller")
> Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
> ---
>   .../devicetree/bindings/pci/starfive,jh7110-pcie.yaml         | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> index 5f432452c815..f254c7111837 100644
> --- a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> @@ -60,6 +60,10 @@ properties:
>       description:
>         The phandle to System Register Controller syscon node.
>   
> +  enable-gpios:
> +    description: GPIO used to enable the PCI bus device power
> +    maxItems: 1
> +

Shouldn't we try to keep the entries alphabetically ordered?

Otherwise looks good.

Best regards

Heinrich

>     perst-gpios:
>       description: GPIO controlled connection to PERST# signal
>       maxItems: 1