[PATCH 2/3] riscv: dts: allwinner: d1s-t113: Add system LDOs

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens at csie.org>

Now that the bindings for the system LDOs have been merged, the nodes
for the system LDOs can be added. These are used on the ClockworkPi.

This was originally part of Samuel's D1 device tree series [1], but was
dropped in v5 as the regulator bindings weren't merged at the time.

[1] https://lore.kernel.org/linux-sunxi/20221231233851.24923-1-samuel@sholland.org/

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index 5a9d7f5a75b4..e4175adb028d 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -396,6 +396,17 @@ syscon: syscon at 3000000 {
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			regulators at 3000150 {
+				compatible = "allwinner,sun20i-d1-system-ldos";
+				reg = <0x3000150 0x4>;
+
+				reg_ldoa: ldoa {
+				};
+
+				reg_ldob: ldob {
+				};
+			};
 		};
 
 		dma: dma-controller at 3002000 {
-- 
2.39.2