[PATCH v2 3/3] riscv: dts: starfive: Add cpu scaling for JH7110 SoC
Mason Huo
mason.huo at starfivetech.com
Sun Apr 16 23:39:42 PDT 2023
Add the operating-points-v2 to support cpu scaling on StarFive JH7110 SoC.
It supports up to 4 cpu frequency loads.
Signed-off-by: Mason Huo <mason.huo at starfivetech.com>
---
.../jh7110-starfive-visionfive-2.dtsi | 17 ++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 33 +++++++++++++++++++
2 files changed, 50 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index cca1c8040801..b25e6d68ce53 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -227,3 +227,20 @@ &uart0 {
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
+
+&U74_1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&U74_2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&U74_3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&U74_4 {
+ cpu-supply = <&vdd_cpu>;
+};
+
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..7eef88d2cedb 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -53,6 +53,9 @@ U74_1: cpu at 1 {
next-level-cache = <&ccache>;
riscv,isa = "rv64imafdc_zba_zbb";
tlb-split;
+ operating-points-v2 = <&cpu_opp>;
+ clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+ clock-names = "cpu";
cpu1_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -79,6 +82,9 @@ U74_2: cpu at 2 {
next-level-cache = <&ccache>;
riscv,isa = "rv64imafdc_zba_zbb";
tlb-split;
+ operating-points-v2 = <&cpu_opp>;
+ clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+ clock-names = "cpu";
cpu2_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -105,6 +111,9 @@ U74_3: cpu at 3 {
next-level-cache = <&ccache>;
riscv,isa = "rv64imafdc_zba_zbb";
tlb-split;
+ operating-points-v2 = <&cpu_opp>;
+ clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+ clock-names = "cpu";
cpu3_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -131,6 +140,9 @@ U74_4: cpu at 4 {
next-level-cache = <&ccache>;
riscv,isa = "rv64imafdc_zba_zbb";
tlb-split;
+ operating-points-v2 = <&cpu_opp>;
+ clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+ clock-names = "cpu";
cpu4_intc: interrupt-controller {
compatible = "riscv,cpu-intc";
@@ -164,6 +176,27 @@ core4 {
};
};
+ cpu_opp: opp-table-0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ opp-microvolt = <800000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <800000>;
+ };
+ opp-750000000 {
+ opp-hz = /bits/ 64 <750000000>;
+ opp-microvolt = <800000>;
+ };
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1040000>;
+ };
+ };
+
gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock {
compatible = "fixed-clock";
clock-output-names = "gmac0_rgmii_rxin";
--
2.39.2
More information about the linux-riscv
mailing list