[PATCH v1] riscv: dts: starfive: Add PMU controller node

[Walker Chen]

Add the pmu controller node for the StarFive JH7110 SoC. The PMU needs
to be used by other modules, e.g. VPU,ISP,etc.

Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
Reviewed-by: Hal Feng <hal.feng at starfivetech.com>
Signed-off-by: Walker Chen <walker.chen at starfivetech.com>
---
This patch is based on:
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/commit/?h=riscv-dt-for-v6.4&id=60bf0a39842eb042bbdc4539285c7e524011fc2d
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..30e1f34d5cf8 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -496,5 +496,12 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		pwrc: power-controller at 17030000 {
+			compatible = "starfive,jh7110-pmu";
+			reg = <0x0 0x17030000 0x0 0x10000>;
+			interrupts = <111>;
+			#power-domain-cells = <1>;
+		};
 	};
 };
-- 
2.17.1