[PATCH v5 1/3] dt-bindings: watchdog: Add watchdog for StarFive JH7100 and JH7110
Guenter Roeck
linux at roeck-us.net
Sun Apr 16 08:54:08 PDT 2023
On Tue, Mar 14, 2023 at 09:24:35PM +0800, Xingyu Wu wrote:
> Add bindings to describe the watchdog for the StarFive JH7100/JH7110 SoC.
> And Use JH7100 as first StarFive SoC with watchdog.
>
> Signed-off-by: Xingyu Wu <xingyu.wu at starfivetech.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
Reviewed-by: Guenter Roeck <linux at roeck-us.net>
> ---
> .../watchdog/starfive,jh7100-wdt.yaml | 71 +++++++++++++++++++
> 1 file changed, 71 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
>
> diff --git a/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml b/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
> new file mode 100644
> index 000000000000..68f3f6fd08a6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/watchdog/starfive,jh7100-wdt.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive Watchdog for JH7100 and JH7110 SoC
> +
> +maintainers:
> + - Xingyu Wu <xingyu.wu at starfivetech.com>
> + - Samin Guo <samin.guo at starfivetech.com>
> +
> +description:
> + The JH7100 and JH7110 watchdog both are 32 bit counters. JH7100 watchdog
> + has only one timeout phase and reboots. And JH7110 watchdog has two
> + timeout phases. At the first phase, the signal of watchdog interrupt
> + output(WDOGINT) will rise when counter is 0. The counter will reload
> + the timeout value. And then, if counter decreases to 0 again and WDOGINT
> + isn't cleared, the watchdog will reset the system unless the watchdog
> + reset is disabled.
> +
> +allOf:
> + - $ref: watchdog.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - starfive,jh7100-wdt
> + - starfive,jh7110-wdt
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: APB clock
> + - description: Core clock
> +
> + clock-names:
> + items:
> + - const: apb
> + - const: core
> +
> + resets:
> + items:
> + - description: APB reset
> + - description: Core reset
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - resets
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + watchdog at 12480000 {
> + compatible = "starfive,jh7100-wdt";
> + reg = <0x12480000 0x10000>;
> + clocks = <&clk 171>,
> + <&clk 172>;
> + clock-names = "apb", "core";
> + resets = <&rst 99>,
> + <&rst 100>;
> + };
More information about the linux-riscv
mailing list