[PATCH v4 0/3] Enable initial support for StarFive VisionFive V1 SBC
Cristian Ciocaltea
cristian.ciocaltea at collabora.com
Wed Nov 16 13:04:03 PST 2022
On 11/16/22 19:50, Conor Dooley wrote:
> On Tue, Oct 18, 2022 at 12:05:39AM +0300, Cristian Ciocaltea wrote:
>> The StarFive VisionFive V1 SBC [1] is similar with the already supported
>> BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC.
>>
>> In addition to documenting the necessary compatibles, this patch series
>> moves most of the content from jh7100-beaglev-starlight.dts to a new file
>> jh7100-common.dtsi, to be shared between the two boards.
>>
>> No other changes are required in order to successfully boot the board.
>>
>> [1] https://github.com/starfive-tech/VisionFive
>
> Hey Cristian,
>
> Apologies for the delay here, we've been sorting out re-routing RISC-V
> DT stuff via the SoC tree. That should be sorted now, so I have picked
> the series up. Should be at:
> https://git.kernel.org/conor/c/a3fe69160c7328a284ebc711ccb689f3beec42dc
Hi Conor,
No problem, thanks for taking care of this!
Regards,
Cristian
> Thanks,
> Conor.
>
>>
>> Changes in v4:
>> - Rebased onto v6.1.0-rc1
>> - Fixed a conflict in patch 2/3 as pinctrl-starfive.h has been renamed
>> to pinctrl-starfive-jh7100.h
>>
>> Changes in v3:
>> - Added Reviewed-by tag from Krzysztof in patch 1/3
>> - Optimized patch 2/3 by enabling copy detection on "git format-patch",
>> as indicated by Krzysztof
>>
>> Changes in v2:
>> - Simplified documentation by using 'enum' instead of 'const' in
>> patch 1/3, according to Conor's review
>> - Added Reviewed-by tags from Conor
>>
>> Cristian Ciocaltea (3):
>> dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board
>> riscv: dts: starfive: Add common DT for JH7100 based boards
>> riscv: dts: starfive: Add StarFive VisionFive V1 device tree
>>
>> .../devicetree/bindings/riscv/starfive.yaml | 4 +-
>> arch/riscv/boot/dts/starfive/Makefile | 2 +-
>> .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +-----------------
>> ...aglev-starlight.dts => jh7100-common.dtsi} | 3 -
>> .../jh7100-starfive-visionfive-v1.dts | 20 +++
>> 5 files changed, 25 insertions(+), 157 deletions(-)
>> copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%)
>> create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
>>
>>
>> base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780
>> --
>> 2.38.0
>>
More information about the linux-riscv
mailing list