[PATCH v4 0/3] Enable initial support for StarFive VisionFive V1 SBC
Conor Dooley
conor at kernel.org
Wed Nov 16 09:50:46 PST 2022
On Tue, Oct 18, 2022 at 12:05:39AM +0300, Cristian Ciocaltea wrote:
> The StarFive VisionFive V1 SBC [1] is similar with the already supported
> BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC.
>
> In addition to documenting the necessary compatibles, this patch series
> moves most of the content from jh7100-beaglev-starlight.dts to a new file
> jh7100-common.dtsi, to be shared between the two boards.
>
> No other changes are required in order to successfully boot the board.
>
> [1] https://github.com/starfive-tech/VisionFive
Hey Cristian,
Apologies for the delay here, we've been sorting out re-routing RISC-V
DT stuff via the SoC tree. That should be sorted now, so I have picked
the series up. Should be at:
https://git.kernel.org/conor/c/a3fe69160c7328a284ebc711ccb689f3beec42dc
Thanks,
Conor.
>
> Changes in v4:
> - Rebased onto v6.1.0-rc1
> - Fixed a conflict in patch 2/3 as pinctrl-starfive.h has been renamed
> to pinctrl-starfive-jh7100.h
>
> Changes in v3:
> - Added Reviewed-by tag from Krzysztof in patch 1/3
> - Optimized patch 2/3 by enabling copy detection on "git format-patch",
> as indicated by Krzysztof
>
> Changes in v2:
> - Simplified documentation by using 'enum' instead of 'const' in
> patch 1/3, according to Conor's review
> - Added Reviewed-by tags from Conor
>
> Cristian Ciocaltea (3):
> dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board
> riscv: dts: starfive: Add common DT for JH7100 based boards
> riscv: dts: starfive: Add StarFive VisionFive V1 device tree
>
> .../devicetree/bindings/riscv/starfive.yaml | 4 +-
> arch/riscv/boot/dts/starfive/Makefile | 2 +-
> .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +-----------------
> ...aglev-starlight.dts => jh7100-common.dtsi} | 3 -
> .../jh7100-starfive-visionfive-v1.dts | 20 +++
> 5 files changed, 25 insertions(+), 157 deletions(-)
> copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%)
> create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
>
>
> base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780
> --
> 2.38.0
>
More information about the linux-riscv
mailing list