[PATCH v5 7/7] riscv: configs: defconfig: Enable Renesas RZ/Five SoC

[Geert Uytterhoeven]

Hi Prabhakar,

On Tue, Nov 8, 2022 at 5:07 PM Lad, Prabhakar
<prabhakar.csengg at gmail.com> wrote:
> On Tue, Nov 8, 2022 at 3:52 PM Geert Uytterhoeven <geert at linux-m68k.org> wrote:
> > On Fri, Oct 28, 2022 at 6:59 PM Prabhakar <prabhakar.csengg at gmail.com> wrote:
> > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> > >
> > > Enable Renesas RZ/Five SoC config in defconfig. It allows the default
> > > upstream kernel to boot on RZ/Five SMARC EVK board.
> > >
> > > Alongside enable SERIAL_SH_SCI config so that the serial driver used by
> > > RZ/Five SoC is built-in.
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> > > Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> > > Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
> > > ---
> > > v4 -> v5
> > > * No change
> > >
> > > v3 -> v4
> > > * Explicitly enabled ARCH_R9A07G043 config (note I have restored the RB
> > >   tags with this change)
> > > * Used riscv instead of RISC-V in subject line
> >
> > Thanks for the update!
> >
> > > --- a/arch/riscv/configs/defconfig
> > > +++ b/arch/riscv/configs/defconfig
> > > @@ -29,6 +29,8 @@ CONFIG_SOC_MICROCHIP_POLARFIRE=y
> > >  CONFIG_SOC_SIFIVE=y
> > >  CONFIG_SOC_STARFIVE=y
> > >  CONFIG_SOC_VIRT=y
> > > +CONFIG_ARCH_RENESAS=y
> > > +CONFIG_ARCH_R9A07G043=y
> >
> > You forgot to refresh after moving ARCH_RENESAS in v5 of "riscv:
> > Kconfig.socs: Add ARCH_RENESAS kconfig option", and after relying on
> > ARCH_R9A07G043 in drivers/soc/renesas/Kconfig.
> >
> Sorry I missed your point here, could you please elaborate.

I mean that the options have moved, so you should update
your patch like this:

    --- a/arch/riscv/configs/defconfig
    +++ b/arch/riscv/configs/defconfig
    @@ -26,11 +26,10 @@ CONFIG_EXPERT=y
     # CONFIG_SYSFS_SYSCALL is not set
     CONFIG_PROFILING=y
     CONFIG_SOC_MICROCHIP_POLARFIRE=y
    +CONFIG_ARCH_RENESAS=y
     CONFIG_SOC_SIFIVE=y
     CONFIG_SOC_STARFIVE=y
     CONFIG_SOC_VIRT=y
    -CONFIG_ARCH_RENESAS=y
    -CONFIG_ARCH_R9A07G043=y
     CONFIG_SMP=y
     CONFIG_HOTPLUG_CPU=y
     CONFIG_PM=y
    @@ -163,6 +159,7 @@ CONFIG_MAILBOX=y
     CONFIG_RPMSG_CHAR=y
     CONFIG_RPMSG_CTRL=y
     CONFIG_RPMSG_VIRTIO=y
    +CONFIG_ARCH_R9A07G043=y
     CONFIG_EXT4_FS=y
     CONFIG_EXT4_FS_POSIX_ACL=y
     CONFIG_EXT4_FS_SECURITY=y

> > >  CONFIG_SMP=y
> > >  CONFIG_HOTPLUG_CPU=y
> > >  CONFIG_PM=y
> >
> > PM and GPIOLIB are auto-selected by ARCH_R9A07G043 (through ARCH_RZG2L)
> > resp. SOC_RENESAS, so they can be dropped.  But it's better to do this
> > after the release of v6.2-rc1, when all pieces have fallen together.
> >
> Are you suggesting dropping it from defconfig?

Yes, but not right now, as that would make it depend on my
renesas-drivers-for-v6.2 branch to keep them enabled.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds