[PATCH v1 0/3] StarFive's SDIO/eMMC driver support

[Ulf Hansson]

On Fri, 16 Dec 2022 at 03:02, William Qiu <william.qiu at starfivetech.com> wrote:
>
>
>
> On 2022/12/7 21:17, William Qiu wrote:
> > Hi,
> >
> > This patchset adds initial rudimentary support for the StarFive
> > designware mobile storage host controller driver. And this driver will
> > be used in StarFive's visionfive-v2 board. The main purpose of adding
> > this driver is to accommodate the ultra-high speed mode of eMMC.
> >
> > The patch series is based on v6.1-rc5.
> >
> > -- William
> >
> > William Qiu (3):
> >   dt-bindings: mmc: Add bindings for StarFive
> >   mmc: starfive: Add sdio/emmc driver support
> >   riscv: dts: starfive: Add mmc node
> >
> >  .../bindings/mmc/starfive,jh7110-sdio.yaml    |  71 +++++++
> >  MAINTAINERS                                   |   6 +
> >  .../jh7110-starfive-visionfive-v2.dts         |  25 +++
> >  arch/riscv/boot/dts/starfive/jh7110.dtsi      |  38 ++++
> >  drivers/mmc/host/Kconfig                      |  10 +
> >  drivers/mmc/host/Makefile                     |   1 +
> >  drivers/mmc/host/dw_mmc-starfive.c            | 197 ++++++++++++++++++
> >  7 files changed, 348 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-sdio.yaml
> >  create mode 100644 drivers/mmc/host/dw_mmc-starfive.c
> >
> > --
> > 2.34.1
> >
>
> Hi Jaehoon/Ulf,
>
> Could you please help to review and provide comments on this patch series?
> Thank you in advance.

Hi William,

Looks like you have received plenty of good comments already and there
are a lot of things for you to update. That said, I think it makes
better sense for me to look at the next version instead.

>
> Best regards,
> William Qiu

Kind regards
Uffe