[PATCH v1 0/3] StarFive's SDIO/eMMC driver support

[William Qiu]

On 2022/12/7 21:17, William Qiu wrote:
> Hi,
> 
> This patchset adds initial rudimentary support for the StarFive
> designware mobile storage host controller driver. And this driver will
> be used in StarFive's visionfive-v2 board. The main purpose of adding
> this driver is to accommodate the ultra-high speed mode of eMMC.
> 
> The patch series is based on v6.1-rc5.
> 
> -- William
> 
> William Qiu (3):
>   dt-bindings: mmc: Add bindings for StarFive
>   mmc: starfive: Add sdio/emmc driver support
>   riscv: dts: starfive: Add mmc node
> 
>  .../bindings/mmc/starfive,jh7110-sdio.yaml    |  71 +++++++
>  MAINTAINERS                                   |   6 +
>  .../jh7110-starfive-visionfive-v2.dts         |  25 +++
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      |  38 ++++
>  drivers/mmc/host/Kconfig                      |  10 +
>  drivers/mmc/host/Makefile                     |   1 +
>  drivers/mmc/host/dw_mmc-starfive.c            | 197 ++++++++++++++++++
>  7 files changed, 348 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-sdio.yaml
>  create mode 100644 drivers/mmc/host/dw_mmc-starfive.c
> 
> --
> 2.34.1
> 

Hi Jaehoon/Ulf,

Could you please help to review and provide comments on this patch series?
Thank you in advance.

Best regards,
William Qiu