open_sock(socket 0) failed: Device or resource busy ?

Komuro komurojun-mbn at nifty.com
Thu Oct 27 08:28:25 EDT 2005


Dear Mr.help-me

The Cirrus Logic PD 6832 PCMCIA/Cardbus Ctrlr may not be fully compatible
with yenta_socket.

One solution is to select PCIC-mode instead of Cardbus-mode
in your BIOS setup menu,
and use i82365 driver instead of yenta_socket driver.

Best Regards
Komuro.


>I own an older laptop from Mitac (5026) with 200Mhz und 32MB RAM. Now I
>try to test if all hardware works with Linux. So I started Knoppix 4.4
>and lot of hardware seems to detect (X with 600x800, sound, PCMCIA,...)
>
>But I've some problems to get my PCMCIA modems to work. I own two cards:
>
>- AnyCom Hot 56K
>- microcom TravelCard Fast Data/Fax Modem
>
>If I try to exec cardmgr:
>
>> cardmgr
>cardmgr[1441]: open_sock(socket 0) failed: Device or resource busy
>
>> lspci
>...
>0000:00:17.0 Cardbus bridge: Cirrus Logoc PD 6832 PCMCIA/Cardbus Ctrlr
>(rev c1)
>0000:00:17.1 Cardbus bridge: Cirrus Logoc PD 6832 PCMCIA/Cardbus Ctrlr
>(rev c1)





More information about the linux-pcmcia mailing list