Bug#303550: kernel-image-2.6.11-1-686: irq11 makes eth0 problems

Daniel Ritz daniel.ritz at gmx.ch
Wed Apr 13 17:46:53 EDT 2005


On Tuesday 12 April 2005 23:14, Philippe Bourcier wrote:
>     hi all,
> 
> On Tue, Apr 12, 2005 at 12:05:02AM +0200, maximilian attems wrote:
> > received another bug report concerning TI irq routing.
> > your patch don't seem to fix this PCI1250 rev2.
> > you'll find the bug report at
> > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=303550
> > 
> > note that the previous bug report #270376 involved a PCI1220 (rev 02)
> > thanks a lot again for your help.
> > debian user seem to be a good user base for your patches. ;-)
> 
> > --- reply to previous bug report follows
> 
> > On Sun, 10 Apr 2005, Philippe Bourcier wrote:
> > 
> > > On Sat, Apr 09, 2005 at 09:52:53PM +0200, maximilian attems wrote:
> > > > could you tested the kernel-image at:
> > > > http://charm.itp.tuwien.ac.at/~mattems/
> > > 
> > > - the vga=791 boot parameter makes the system boot with a black
> > >   screen; if i switch to a console, i don't get one (graphical broken
> > >   screen);
> 
>   just with the above one: 2.6.11-ti-fix
> 
> > > - the usb mouse doesn't work at all (console nor X);
> > 
> > sorry i don't get you now,
> > does this happen with any debian kernel or just with the one above?
> 
>   with 2.6.11-ti-fix and (sometimes...) with 2.6.11-1-686
> (debian)
> 
> Apr 12 21:40:05 ile kernel: Linux version 2.6.11-1-686 (dilinger at mouth) (gcc version 3.3.5 (Debian 1:3.3.5-8)) #1 Sun Apr 3 06:20:48 EDT 2005
> 
> Apr 12 21:40:05 ile kernel: Kernel command line: root=/dev/hda2 video=vesafb:ywrap,mtrr vga=791 noapic acpi=off ro 
> 
> Apr 12 21:40:38 ile kernel: [<c013242a>] __report_bad_irq+0x2a/0xa0
> Apr 12 21:40:38 ile kernel: [<c0131ed0>] handle_IRQ_event+0x30/0x70
> Apr 12 21:40:38 ile kernel: [<c0132530>] note_interrupt+0x70/0xb0
> Apr 12 21:40:38 ile kernel: [<c0131ff0>] __do_IRQ+0xe0/0xf0
> Apr 12 21:40:38 ile kernel: [<c0105279>] do_IRQ+0x19/0x30
> Apr 12 21:40:38 ile kernel: [<c010391a>] common_interrupt+0x1a/0x20
> Apr 12 21:40:38 ile kernel: [<c011cb6e>] __do_softirq+0x2e/0x90
> Apr 12 21:40:38 ile kernel: [<c011cbf6>] do_softirq+0x26/0x30
> Apr 12 21:40:38 ile kernel: [<c010527e>] do_IRQ+0x1e/0x30
> Apr 12 21:40:38 ile kernel: [<c010391a>] common_interrupt+0x1a/0x20
> Apr 12 21:40:38 ile kernel: eth0: interrupt(s) dropped!
> 
> > have you installed hotplug? if not is mousedev and psmouse loaded?
> 
>   yes: hotplug  0.0.20040329-22  Linux Hotplug Scripts
> 
> > can you send in the output of cat /proc/bus/input/devices
> >  
> > > Apr 10 14:34:55 ile kernel: Linux version 2.6.11-ti-fix (root at aipc54) (gcc version 3.3.5 (Debian 1:3.3.5-8)) #1 Fri Apr 8 19:47:44 CEST 2005
> > ..
> > > Apr 10 14:34:55 ile kernel: Linux Kernel Card Services
> > > Apr 10 14:34:55 ile kernel: options:  [pci] [cardbus] [pm]
> > > Apr 10 14:34:55 ile kernel: PCI: Found IRQ 11 for device 0000:00:03.0
> > > Apr 10 14:34:55 ile kernel: Yenta: CardBus bridge found at 0000:00:03.0 [0000:0000]
> > > Apr 10 14:34:55 ile kernel: Yenta: Enabling burst memory read transactions
> > > Apr 10 14:34:55 ile kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
> > > Apr 10 14:34:55 ile kernel: Yenta: Routing CardBus interrupts to PCI
> > > Apr 10 14:34:55 ile kernel: Yenta TI: socket 0000:00:03.0, mfunc 0xcba97543, devctl 0x62
> > > Apr 10 14:34:55 ile kernel: Yenta: ISA IRQ mask 0x0698, PCI irq 11
> > > Apr 10 14:34:55 ile kernel: Socket status: 30000010
> > > Apr 10 14:34:55 ile kernel: PCI: Found IRQ 11 for device 0000:00:03.1
> > > Apr 10 14:34:55 ile kernel: Yenta: CardBus bridge found at 0000:00:03.1 [0000:0000]
> > > Apr 10 14:34:55 ile kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
> > > Apr 10 14:34:55 ile kernel: Yenta: Routing CardBus interrupts to PCI
> > > Apr 10 14:34:55 ile kernel: Yenta TI: socket 0000:00:03.1, mfunc 0xcba97543, devctl 0x62
> > > Apr 10 14:34:55 ile kernel: Yenta: ISA IRQ mask 0x0698, PCI irq 11
> > > Apr 10 14:34:55 ile kernel: Socket status: 30000010
> > ..
> > > Apr 10 14:35:16 ile kernel: eth0: 3Com 3c589, io 0x310, irq 9, hw_addr 00:00:86:52:4B:CB
> > > Apr 10 14:35:16 ile kernel: 8K FIFO split 5:3 Rx:Tx, auto xcvr
> > > Apr 10 14:35:16 ile kernel: program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
> > > Apr 10 14:35:16 ile kernel: ttyS2 at I/O 0x3e8 (irq = 11) is a 16550A
> > > Apr 10 14:35:21 ile kernel: eth0: flipped to 10baseT
> > > Apr 10 14:35:23 ile xfs: ignoring font path element /usr/lib/X11/fonts/cyrillic/ (unreadable)
> > > Apr 10 14:35:23 ile xfs: ignoring font path element /usr/lib/X11/fonts/CID (unreadable)
> > > Apr 10 14:35:27 ile kernel: [<c01297b5>] __report_bad_irq+0x31/0x77
> > > Apr 10 14:35:27 ile kernel: [<c012985f>] note_interrupt+0x4c/0x71
> > > Apr 10 14:35:27 ile kernel: [<c0129476>] __do_IRQ+0x93/0xbd
> > > Apr 10 14:35:27 ile kernel: [<c0104b35>] do_IRQ+0x19/0x24
> > > Apr 10 14:35:27 ile kernel: [<c01038ba>] common_interrupt+0x1a/0x20
> > > Apr 10 14:35:27 ile kernel: [<c01189a4>] __do_softirq+0x2c/0x7d
> > > Apr 10 14:35:27 ile kernel: [<c0118a17>] do_softirq+0x22/0x26
> > > Apr 10 14:35:27 ile kernel: [<c0104b3a>] do_IRQ+0x1e/0x24
> > > Apr 10 14:35:27 ile kernel: [<c01038ba>] common_interrupt+0x1a/0x20
> > > Apr 10 14:35:27 ile kernel: eth0: interrupt(s) dropped!
> > 
> > urgs, thanks for your testing and feedback.
> 

the ethernet cards irq is coming on the line of the cardbus bridge. this
is because the CB_BRIDGE_INTR bit in the bridge control register
isn't set. but there has been no relevant changes to yenta_socket in
the 2.6.10 -> 2.6.11 timeframe as far as i can see. i think it could be
a recent change to cs.c...i'm gonna read thru the code tomorrow or so..
doesn't sound to hard.

rgds
-daniel




More information about the linux-pcmcia mailing list