[PATCH] nvme-pci: add quirk for Wodposit WPBSNM8-256GTP to disable secondary temp thresholds

[RigoLigo]

Hi all,

On 2025-12-08 21:23, Ilikara Zheng wrote:
> Secondary temperature thresholds (temp2_{min,max}) were not reported
> properly on this NVMe SSD. This resulted in an error while attempting to
> read these values with sensors(1):
> 
>    ERROR: Can't get value of subfeature temp2_min: I/O error
>    ERROR: Can't get value of subfeature temp2_max: I/O error
> 
> Add the device to the nvme_id_table with the
> NVME_QUIRK_NO_SECONDARY_TEMP_THRESH flag to suppress access to all non-
> composite temperature thresholds.
> 
> Cc: stable at vger.kernel.org
> Signed-off-by: Ilikara Zheng <ilikara at aosc.io>
> ---
>   drivers/nvme/host/pci.c | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
> index e5ca8301bb8b..31049f33f27d 100644
> --- a/drivers/nvme/host/pci.c
> +++ b/drivers/nvme/host/pci.c
> @@ -3997,6 +3997,8 @@ static const struct pci_device_id nvme_id_table[] = {
>   		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
>   	{ PCI_DEVICE(0x1e49, 0x0041),   /* ZHITAI TiPro7000 NVMe SSD */
>   		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
> +	{ PCI_DEVICE(0x1fa0, 0x2283),   /* Wodposit WPBSNM8-256GTP */
> +		.driver_data = NVME_QUIRK_NO_SECONDARY_TEMP_THRESH, },
>   	{ PCI_DEVICE(0x025e, 0xf1ac),   /* SOLIDIGM  P44 pro SSDPFKKW020X7  */
>   		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
>   	{ PCI_DEVICE(0xc0a9, 0x540a),   /* Crucial P2 */

I have tested this patch on a CTCISZ 3B6000M-NUC with an exact same SSD 
and this has resolved the error with sensor(1).

Tested-by: Wu Haotian <rigoligo03 at gmail.com>