[PATCH] nvme-pci: add quirk for Wodposit WPBSNM8-256GTP to disable secondary temp thresholds

[Ilikara Zheng]

Secondary temperature thresholds (temp2_{min,max}) were not reported
properly on this NVMe SSD. This resulted in an error while attempting to
read these values with sensors(1):

  ERROR: Can't get value of subfeature temp2_min: I/O error
  ERROR: Can't get value of subfeature temp2_max: I/O error

Add the device to the nvme_id_table with the
NVME_QUIRK_NO_SECONDARY_TEMP_THRESH flag to suppress access to all non-
composite temperature thresholds.

Cc: stable at vger.kernel.org
Signed-off-by: Ilikara Zheng <ilikara at aosc.io>
---
 drivers/nvme/host/pci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index e5ca8301bb8b..31049f33f27d 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3997,6 +3997,8 @@ static const struct pci_device_id nvme_id_table[] = {
 		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
 	{ PCI_DEVICE(0x1e49, 0x0041),   /* ZHITAI TiPro7000 NVMe SSD */
 		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
+	{ PCI_DEVICE(0x1fa0, 0x2283),   /* Wodposit WPBSNM8-256GTP */
+		.driver_data = NVME_QUIRK_NO_SECONDARY_TEMP_THRESH, },
 	{ PCI_DEVICE(0x025e, 0xf1ac),   /* SOLIDIGM  P44 pro SSDPFKKW020X7  */
 		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
 	{ PCI_DEVICE(0xc0a9, 0x540a),   /* Crucial P2 */
-- 
2.52.0