[PATCH v2] nvmet: force reconnect when number of queue changes

[John Meneghini]

On 9/28/22 14:02, Knight, Frederick wrote:
> Reset and Disconnect are different.
> 
> Reset uses registers (and therefore Get Property and Set Property commands) over a valid connection.
> 
> Disconnect causes a reset (you have to reconnect to the reset controller)
> Reset does not cause an immediate disconnect.

OK, so you are saying that the rule "The controller shall not change the value allocated between resets" in NVMe 5.27.1.5 
doesn't apply to fabric controllers?

/John

> 	Fred
>