[PATCH v2] nvmet-tcp: handle ICReq PDU received in NVMET_TCP_Q_LIVE state

[Varun Prakash]

As per NVMe/TCP transport specification ICReq PDU is the first PDU received
by the controller and controller should receive only one ICReq PDU.

If controller receives more than one ICReq PDU then this can be considered
as fatal error.

nvmet-tcp driver does not check for ICReq PDU opcode if queue state is
NVMET_TCP_Q_LIVE. In LIVE state ICReq PDU is treated as CapsuleCmd PDU,
this can result in abnormal behavior.

Add a check for ICReq PDU in nvmet_tcp_done_recv_pdu() to fix this issue.

Signed-off-by: Varun Prakash <varun at chelsio.com>
---

v2:
 updated commit message

 drivers/nvme/target/tcp.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index a3694a32f6d5..02df2fc7dfe7 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -976,6 +976,13 @@ static int nvmet_tcp_done_recv_pdu(struct nvmet_tcp_queue *queue)
 		return nvmet_tcp_handle_icreq(queue);
 	}
 
+	if (unlikely(hdr->type == nvme_tcp_icreq)) {
+		pr_err("queue %d: received icreq pdu in state %d\n",
+			queue->idx, queue->state);
+		nvmet_tcp_fatal_error(queue);
+		return -EPROTO;
+	}
+
 	if (hdr->type == nvme_tcp_h2c_data) {
 		ret = nvmet_tcp_handle_h2c_data_pdu(queue);
 		if (unlikely(ret))
-- 
2.31.1