[PATCH v2 2/4] block: Add Sed-opal library
Scott Bauer
scott.bauer at intel.com
Tue Nov 29 13:52:00 PST 2016
This patch implements the necessary logic to bring an Opal
enabled drive out of a factory-enabled into a working
Opal state.
This patch set also enables logic to save a password to
be replayed during a resume from suspend. The key can be
saved in the driver or in the Kernel's Key managment.
Signed-off-by: Scott Bauer <scott.bauer at intel.com>
Signed-off-by: Rafael Antognolli <Rafael.Antognolli at intel.com>
---
block/Makefile | 2 +-
block/sed-opal.c | 3157 +++++++++++++++++++++++++++++++++++++++++++++
block/sed-opal_internal.h | 601 +++++++++
block/sed.c | 207 +++
4 files changed, 3966 insertions(+), 1 deletion(-)
create mode 100644 block/sed-opal.c
create mode 100644 block/sed-opal_internal.h
create mode 100644 block/sed.c
diff --git a/block/Makefile b/block/Makefile
index 36acdd7..6632d42 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -8,7 +8,7 @@ obj-$(CONFIG_BLOCK) := bio.o elevator.o blk-core.o blk-tag.o blk-sysfs.o \
blk-lib.o blk-mq.o blk-mq-tag.o \
blk-mq-sysfs.o blk-mq-cpumap.o ioctl.o \
genhd.o scsi_ioctl.o partition-generic.o ioprio.o \
- badblocks.o partitions/
+ badblocks.o sed.o sed-opal.o partitions/
obj-$(CONFIG_BOUNCE) += bounce.o
obj-$(CONFIG_BLK_DEV_BSG) += bsg.o
diff --git a/block/sed-opal.c b/block/sed-opal.c
new file mode 100644
index 0000000..53602aa
--- /dev/null
+++ b/block/sed-opal.c
@@ -0,0 +1,3157 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Authors:
+ * Rafael Antognolli <rafael.antognolli at intel.com>
+ * Scott Bauer <scott.bauer at intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ":OPAL: " fmt
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/genhd.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <uapi/linux/sed-opal.h>
+#include <linux/sed.h>
+#include <linux/sed-opal.h>
+#include <linux/string.h>
+#include <linux/kdev_t.h>
+#include <linux/key.h>
+
+#include "sed-opal_internal.h"
+
+#define IO_BUFFER_LENGTH 2048
+
+#define MAX_TOKS 64
+
+typedef int (cont_fn)(void *data);
+
+struct opal_cmd {
+ struct block_device *bdev;
+ cont_fn *cb;
+ void *cb_data;
+
+ size_t pos;
+ u8 cmd_buf[IO_BUFFER_LENGTH * 2];
+ u8 resp_buf[IO_BUFFER_LENGTH * 2];
+ u8 *cmd;
+ u8 *resp;
+};
+
+/*
+ * On the parsed response, we don't store again the toks that are already
+ * stored in the response buffer. Instead, for each token, we just store a
+ * pointer to the position in the buffer where the token starts, and the size
+ * of the token in bytes.
+ */
+struct opal_resp_tok {
+ const u8 *pos;
+ size_t len;
+ enum OPAL_RESPONSE_TOKEN type;
+ enum OPAL_ATOM_WIDTH width;
+ union {
+ u64 u;
+ s64 s;
+ } stored;
+};
+
+/*
+ * From the response header it's not possible to know how many tokens there are
+ * on the payload. So we hardcode that the maximum will be MAX_TOKS, and later
+ * if we start dealing with messages that have more than that, we can increase
+ * this number. This is done to avoid having to make two passes through the
+ * response, the first one counting how many tokens we have and the second one
+ * actually storing the positions.
+ */
+struct parsed_resp {
+ int num;
+ struct opal_resp_tok toks[MAX_TOKS];
+};
+
+struct opal_dev;
+
+typedef int (*opal_step)(struct opal_dev *dev);
+
+struct opal_dev {
+ dev_t majmin;
+ sed_sec_submit *submit_fn;
+ void *submit_data;
+ struct opal_lock_unlock lkul;
+ const opal_step *funcs;
+ void **func_data;
+ bool resume_from_suspend;
+ struct opal_suspend_unlk *resume_data;
+ size_t num_func_data;
+ atomic_t in_use;
+ sector_t start;
+ sector_t length;
+ u8 lr;
+ u8 key_type;
+ u8 key_name[OPAL_KEY_MAX];
+ size_t key_name_len;
+ u8 key[OPAL_KEY_MAX];
+ size_t key_len;
+ u16 comID;
+ u32 HSN;
+ u32 TSN;
+ u64 align;
+ u64 lowest_lba;
+ struct list_head node;
+ char disk_name[DISK_NAME_LEN];
+ int state;
+
+ struct opal_cmd cmd;
+ struct parsed_resp parsed;
+
+ size_t prev_d_len;
+ void *prev_data;
+
+ opal_step error_cb;
+ void *error_cb_data;
+};
+
+LIST_HEAD(opal_list);
+DEFINE_SPINLOCK(list_spinlock);
+
+static void print_buffer(const u8 *ptr, u32 length)
+{
+#ifdef DEBUG
+ print_hex_dump_bytes("OPAL: ", DUMP_PREFIX_OFFSET, ptr, length);
+ pr_debug("\n");
+#endif
+}
+
+#define TPER_SYNC_SUPPORTED BIT(0)
+
+static bool check_tper(const void *data)
+{
+ const struct d0_tper_features *tper = data;
+ u8 flags = tper->supported_features;
+
+ if (!(flags & TPER_SYNC_SUPPORTED)) {
+ pr_err("TPer sync not supported. flags = %d\n",
+ tper->supported_features);
+ return false;
+ }
+
+ return true;
+}
+
+static bool check_SUM(const void *data)
+{
+ const struct d0_single_user_mode *sum = data;
+ u32 nlo = be32_to_cpu(sum->num_locking_objects);
+
+ if (nlo == 0) {
+ pr_err("Need at least one locking object.\n");
+ return false;
+ }
+
+ pr_debug("Number of locking objects: %d\n", nlo);
+
+ return true;
+}
+
+static u16 get_comID_v100(const void *data)
+{
+ const struct d0_opal_v100 *v100 = data;
+
+ return be16_to_cpu(v100->baseComID);
+}
+
+static u16 get_comID_v200(const void *data)
+{
+ const struct d0_opal_v200 *v200 = data;
+
+ return be16_to_cpu(v200->baseComID);
+}
+
+static int opal_send_cmd(struct opal_dev *dev)
+{
+ return dev->submit_fn(dev->submit_data, dev->comID, TCG_SECP_01,
+ dev->cmd.cmd, IO_BUFFER_LENGTH, true);
+}
+
+static int opal_recv_cmd(struct opal_dev *dev)
+{
+ return dev->submit_fn(dev->submit_data, dev->comID, TCG_SECP_01,
+ dev->cmd.resp, IO_BUFFER_LENGTH, false);
+}
+
+static int opal_recv_check(struct opal_dev *dev)
+{
+ size_t buflen = IO_BUFFER_LENGTH;
+ void *buffer = dev->cmd.resp;
+ struct opal_header *hdr = buffer;
+ int ret;
+
+ do {
+ pr_debug("%s: Sent OPAL command: outstanding=%d, minTransfer=%d\n",
+ dev->disk_name, hdr->cp.outstandingData,
+ hdr->cp.minTransfer);
+
+ if (hdr->cp.outstandingData == 0 ||
+ hdr->cp.minTransfer != 0)
+ return 0;
+
+ memset(buffer, 0, buflen);
+ ret = opal_recv_cmd(dev);
+ } while (!ret);
+
+ return ret;
+}
+
+static int opal_send_recv(struct opal_dev *dev, cont_fn *cont)
+{
+ int ret;
+
+ ret = opal_send_cmd(dev);
+ if (ret)
+ return ret;
+ ret = opal_recv_cmd(dev);
+ if (ret)
+ return ret;
+ ret = opal_recv_check(dev);
+ if (ret)
+ return ret;
+
+ return cont(dev);
+}
+
+static void check_geometry(struct opal_dev *dev, const void *data)
+{
+ const struct d0_geometry_features *geo = data;
+
+ dev->align = geo->alignment_granularity;
+ dev->lowest_lba = geo->lowest_aligned_lba;
+}
+
+static int next(struct opal_dev *dev)
+{
+ opal_step func;
+ int error = 0;
+
+ do {
+
+ func = dev->funcs[dev->state];
+ if (!func)
+ break;
+
+ dev->state++;
+ error = func(dev);
+
+ if (error) {
+ pr_err("%s: Error on step function: %d with error %d: %s\n",
+ dev->disk_name, dev->state, error,
+ opal_error_to_human(error));
+
+ /*
+ * We check for state > 2 because error_cb is
+ * an end session call. We never start a session until
+ * after state 2. So If we failed on state 2 or lower
+ * that means we failed to start a session
+ * due to a bad pw or something. Therefore is no reason
+ * to end a non existant session.
+ */
+ if (dev->error_cb && dev->state > 2)
+ dev->error_cb(dev->error_cb_data);
+ }
+ } while (!error);
+
+ return error;
+}
+
+static int opal_discovery0_end(struct opal_dev *dev)
+{
+ bool foundComID = false, supported = true, single_user = false;
+ const struct d0_header *hdr;
+ const u8 *epos, *cpos;
+ u16 comID = 0;
+ int error = 0;
+
+ epos = dev->cmd.resp;
+ cpos = dev->cmd.resp;
+ hdr = (struct d0_header *)dev->cmd.resp;
+
+ print_buffer(dev->cmd.resp, be32_to_cpu(hdr->length));
+
+ epos += be32_to_cpu(hdr->length); /* end of buffer */
+ cpos += sizeof(*hdr); /* current position on buffer */
+
+ while (cpos < epos && supported) {
+ const struct d0_features *body =
+ (const struct d0_features *)cpos;
+
+ switch (be16_to_cpu(body->code)) {
+ case FC_TPER:
+ supported = check_tper(body->features);
+ break;
+ case FC_SINGLEUSER:
+ single_user = check_SUM(body->features);
+ break;
+ case FC_GEOMETRY:
+ check_geometry(dev, body);
+ break;
+ case FC_LOCKING:
+ case FC_ENTERPRISE:
+ case FC_DATASTORE:
+ /* some ignored properties */
+ pr_debug("%s: Found OPAL feature description: %d\n",
+ dev->disk_name, be16_to_cpu(body->code));
+ break;
+ case FC_OPALV100:
+ comID = get_comID_v100(body->features);
+ foundComID = true;
+ break;
+ case FC_OPALV200:
+ comID = get_comID_v200(body->features);
+ foundComID = true;
+ break;
+ case 0xbfff ... 0xffff:
+ /* vendor specific, just ignore */
+ break;
+ default:
+ pr_warn("%s: OPAL Unknown feature: %d\n",
+ dev->disk_name, be16_to_cpu(body->code));
+
+ }
+ cpos += body->length + 4;
+ }
+
+ if (!supported) {
+ pr_err("%s: Device not supported\n", dev->disk_name);
+ error = 1;
+ goto err_callback;
+ }
+
+ if (!single_user)
+ pr_warn("%s: Device doesn't support single user mode\n",
+ dev->disk_name);
+
+ if (!foundComID) {
+ pr_warn("%s: Could not find OPAL comID for device. OPAL kernel unlocking will be disabled\n",
+ dev->disk_name);
+ error = 1;
+ goto err_callback;
+ }
+
+ dev->comID = comID;
+
+err_callback:
+ return error;
+}
+
+static int opal_discovery0(struct opal_dev *dev)
+{
+ int ret;
+
+ memset(dev->cmd.resp, 0, IO_BUFFER_LENGTH);
+ dev->comID = 0x0001;
+ ret = opal_recv_cmd(dev);
+ if (ret)
+ return ret;
+ return opal_discovery0_end(dev);
+}
+
+static void add_token_u8(struct opal_cmd *cmd, u8 tok)
+{
+ cmd->cmd[cmd->pos++] = tok;
+}
+
+static ssize_t test_and_add_token_u8(struct opal_cmd *cmd, u8 tok)
+{
+ BUILD_BUG_ON(IO_BUFFER_LENGTH >= SIZE_MAX);
+
+ if (cmd->pos >= IO_BUFFER_LENGTH - 1) {
+ pr_err("Error adding u8: end of buffer.\n");
+ return -ERANGE;
+ }
+
+ add_token_u8(cmd, tok);
+
+ return 1;
+}
+
+#define TINY_ATOM_DATA_MASK GENMASK(5, 0)
+#define TINY_ATOM_SIGNED BIT(6)
+
+#define SHORT_ATOM_ID BIT(7)
+#define SHORT_ATOM_BYTESTRING BIT(5)
+#define SHORT_ATOM_SIGNED BIT(4)
+#define SHORT_ATOM_LEN_MASK GENMASK(3, 0)
+
+static void add_short_atom_header(struct opal_cmd *cmd, bool bytestring,
+ bool has_sign, int len)
+{
+ u8 atom;
+
+ atom = SHORT_ATOM_ID;
+ atom |= bytestring ? SHORT_ATOM_BYTESTRING : 0;
+ atom |= has_sign ? SHORT_ATOM_SIGNED : 0;
+ atom |= len & SHORT_ATOM_LEN_MASK;
+
+ add_token_u8(cmd, atom);
+}
+
+#define MEDIUM_ATOM_ID (BIT(7) | BIT(6))
+#define MEDIUM_ATOM_BYTESTRING BIT(4)
+#define MEDIUM_ATOM_SIGNED BIT(3)
+#define MEDIUM_ATOM_LEN_MASK GENMASK(2, 0)
+
+static void add_medium_atom_header(struct opal_cmd *cmd, bool bytestring,
+ bool has_sign, int len)
+{
+ u8 header0;
+
+ header0 = MEDIUM_ATOM_ID;
+ header0 |= bytestring ? MEDIUM_ATOM_BYTESTRING : 0;
+ header0 |= has_sign ? MEDIUM_ATOM_SIGNED : 0;
+ header0 |= (len >> 8) & MEDIUM_ATOM_LEN_MASK;
+ cmd->cmd[cmd->pos++] = header0;
+ cmd->cmd[cmd->pos++] = len;
+}
+
+static void add_token_u64(struct opal_cmd *cmd, u64 number, size_t len)
+{
+ add_short_atom_header(cmd, false, false, len);
+
+ while (len--) {
+ u8 n = number >> (len * 8);
+
+ add_token_u8(cmd, n);
+ }
+}
+
+static ssize_t test_and_add_token_u64(struct opal_cmd *cmd, u64 number)
+{
+ int len;
+ int msb;
+
+ if (!(number & ~TINY_ATOM_DATA_MASK))
+ return test_and_add_token_u8(cmd, number);
+
+ msb = fls(number);
+ len = DIV_ROUND_UP(msb, 4);
+
+ if (cmd->pos >= IO_BUFFER_LENGTH - len - 1) {
+ pr_err("Error adding u64: end of buffer.\n");
+ return -ERANGE;
+ }
+
+ add_token_u64(cmd, number, len);
+
+ /* return length of token plus atom */
+ return len + 1;
+}
+
+static void add_token_bytestring(struct opal_cmd *cmd,
+ const u8 *bytestring, size_t len)
+{
+ memcpy(&cmd->cmd[cmd->pos], bytestring, len);
+ cmd->pos += len;
+}
+
+static ssize_t test_and_add_token_bytestring(struct opal_cmd *cmd,
+ const u8 *bytestring, size_t len)
+{
+ size_t header_len = 1;
+ bool is_short_atom = true;
+
+ if (len & ~SHORT_ATOM_LEN_MASK) {
+ header_len = 2;
+ is_short_atom = false;
+ }
+
+ if (cmd->pos >= IO_BUFFER_LENGTH - len - header_len) {
+ pr_err("Error adding bytestring: end of buffer.\n");
+ return -ERANGE;
+ }
+
+ if (is_short_atom)
+ add_short_atom_header(cmd, true, false, len);
+ else
+ add_medium_atom_header(cmd, true, false, len);
+
+ add_token_bytestring(cmd, bytestring, len);
+
+ return header_len + len;
+}
+
+#define LOCKING_RANGE_NON_GLOBAL 0x03
+
+static int build_locking_range(u8 *buffer, size_t length, u8 lr)
+{
+ if (length < OPAL_UID_LENGTH)
+ return -ERANGE;
+
+ memcpy(buffer, OPALUID[OPAL_LOCKINGRANGE_GLOBAL], OPAL_UID_LENGTH);
+
+ if (lr == 0)
+ return 0;
+ buffer[5] = LOCKING_RANGE_NON_GLOBAL;
+ buffer[7] = lr;
+
+ return 0;
+}
+
+static int build_locking_user(u8 *buffer, size_t length, u8 lr)
+{
+ if (length < OPAL_UID_LENGTH)
+ return -ERANGE;
+
+ memcpy(buffer, OPALUID[OPAL_USER1_UID], OPAL_UID_LENGTH);
+
+ buffer[7] = lr + 1;
+
+ return 0;
+}
+
+/*
+ * N = number of format specifiers (1-999) to be replicated
+ * c = u8
+ * u = u64
+ * s = bytestring, length
+ *
+ * ret = test_and_add_token_va(cmd, "c",
+ * u8_val1);
+ *
+ * ret = test_and_add_token_va(cmd, "2c2u",
+ * u8_val1, u8_val2, u64_val1, u64_val2);
+ *
+ * ret = test_and_add_token_va(cmd, "3s",
+ * bytestring1, length1,
+ * bytestring2, length2,
+ * bytestring3, length3);
+ */
+static int test_and_add_token_va(struct opal_cmd *cmd,
+ const char *fmt, ...)
+{
+ const u8 *it = fmt, *tmp;
+ int ret, num = 1, sum = 0;
+ va_list ap;
+
+ va_start(ap, fmt);
+
+ while (*it != '\0') {
+ u64 tok64 = 0;
+ u8 tok, *bstr;
+ size_t len;
+
+ ret = 0;
+
+ switch (*it) {
+ case '1' ... '9':
+ tmp = it;
+ num = 0;
+ while (*tmp >= '0' && *tmp <= '9')
+ num = num * 10 + (*tmp++ - '0');
+ it = tmp;
+ continue;
+ case 'c':
+ while (num--) {
+ tok = va_arg(ap, unsigned int);
+ ret = test_and_add_token_u8(cmd, tok);
+ if (ret < 0)
+ goto err;
+ }
+ num = 1;
+ break;
+ case 'u':
+ while (num--) {
+ tok64 = va_arg(ap, u64);
+ ret = test_and_add_token_u64(cmd, tok64);
+ if (ret < 0)
+ goto err;
+ }
+ num = 1;
+ break;
+ case 's':
+ while (num--) {
+ bstr = va_arg(ap, u8 *);
+ len = va_arg(ap, size_t);
+ ret = test_and_add_token_bytestring(cmd, bstr,
+ len);
+ if (ret < 0)
+ goto err;
+ }
+ num = 1;
+ break;
+ case ' ':
+ case '\t':
+ /* ignored */
+ break;
+ default:
+ pr_warn("Unrecognized type.\n");
+ }
+
+ it++;
+ sum += ret;
+ }
+
+ va_end(ap);
+
+ return sum;
+
+ err:
+ pr_err("Token failed to be added.\n");
+ return ret;
+}
+
+static void set_comID(struct opal_cmd *cmd, u16 comID)
+{
+ struct opal_header *hdr = (struct opal_header *)cmd->cmd;
+
+ hdr->cp.extendedComID[0] = comID >> 8;
+ hdr->cp.extendedComID[1] = comID;
+ hdr->cp.extendedComID[2] = 0;
+ hdr->cp.extendedComID[3] = 0;
+}
+
+static int cmd_finalize(struct opal_cmd *cmd, u32 hsn, u32 tsn)
+{
+ struct opal_header *hdr;
+ int ret;
+
+ ret = test_and_add_token_va(cmd, "6c",
+ OPAL_ENDOFDATA, OPAL_STARTLIST,
+ 0, 0, 0, OPAL_ENDLIST);
+
+ if (ret < 0) {
+ pr_err("Error finalizing command.\n");
+ return -EFAULT;
+ }
+
+ hdr = (struct opal_header *) cmd->cmd;
+
+ hdr->pkt.TSN = cpu_to_be32(tsn);
+ hdr->pkt.HSN = cpu_to_be32(hsn);
+
+ hdr->subpkt.length = cpu_to_be32(cmd->pos - sizeof(*hdr));
+ while (cmd->pos % 4) {
+ if (cmd->pos >= IO_BUFFER_LENGTH) {
+ pr_err("Error: Buffer overrun\n");
+ return -ERANGE;
+ }
+ cmd->cmd[cmd->pos++] = 0;
+ }
+ hdr->pkt.length = cpu_to_be32(cmd->pos - sizeof(hdr->cp) -
+ sizeof(hdr->pkt));
+ hdr->cp.length = cpu_to_be32(cmd->pos - sizeof(hdr->cp));
+
+ return 0;
+}
+
+static enum OPAL_RESPONSE_TOKEN token_type(const struct parsed_resp *resp,
+ int n)
+{
+ const struct opal_resp_tok *tok;
+
+ if (n >= resp->num) {
+ pr_err("Token number doesn't exist: %d, resp: %d\n",
+ n, resp->num);
+ return OPAL_DTA_TOKENID_INVALID;
+ }
+
+ tok = &resp->toks[n];
+ if (tok->len == 0) {
+ pr_err("Token length must be non-zero\n");
+ return OPAL_DTA_TOKENID_INVALID;
+ }
+
+ return tok->type;
+}
+
+/*
+ * This function returns 0 in case of invalid token. One should call
+ * token_type() first to find out if the token is valid or not.
+ */
+static enum OPAL_TOKEN response_get_token(const struct parsed_resp *resp,
+ int n)
+{
+ const struct opal_resp_tok *tok;
+
+ if (n >= resp->num) {
+ pr_err("Token number doesn't exist: %d, resp: %d\n",
+ n, resp->num);
+ return 0;
+ }
+
+ tok = &resp->toks[n];
+ if (tok->len == 0) {
+ pr_err("Token length must be non-zero\n");
+ return 0;
+ }
+
+ return tok->pos[0];
+}
+
+static size_t response_parse_tiny(struct opal_resp_tok *tok,
+ const u8 *pos)
+{
+ tok->pos = pos;
+ tok->len = 1;
+ tok->width = OPAL_WIDTH_TINY;
+
+ if (pos[0] & TINY_ATOM_SIGNED) {
+ tok->type = OPAL_DTA_TOKENID_SINT;
+ } else {
+ tok->type = OPAL_DTA_TOKENID_UINT;
+ tok->stored.u = pos[0] & 0x3f;
+ }
+
+ return tok->len;
+}
+
+static size_t response_parse_short(struct opal_resp_tok *tok,
+ const u8 *pos)
+{
+ tok->pos = pos;
+ tok->len = (pos[0] & SHORT_ATOM_LEN_MASK) + 1;
+ tok->width = OPAL_WIDTH_SHORT;
+
+ if (pos[0] & SHORT_ATOM_BYTESTRING) {
+ tok->type = OPAL_DTA_TOKENID_BYTESTRING;
+ } else if (pos[0] & SHORT_ATOM_SIGNED) {
+ tok->type = OPAL_DTA_TOKENID_SINT;
+ } else {
+ u64 u_integer = 0;
+ int i, b = 0;
+
+ tok->type = OPAL_DTA_TOKENID_UINT;
+ if (tok->len > 9) {
+ pr_warn("uint64 with more than 8 bytes\n");
+ return -EINVAL;
+ }
+ for (i = tok->len - 1; i > 0; i--) {
+ u_integer |= ((u64)pos[i] << (8 * b));
+ b++;
+ }
+ tok->stored.u = u_integer;
+ }
+
+ return tok->len;
+}
+
+static size_t response_parse_medium(struct opal_resp_tok *tok,
+ const u8 *pos)
+{
+ tok->pos = pos;
+ tok->len = (((pos[0] & MEDIUM_ATOM_LEN_MASK) << 8) | pos[1]) + 2;
+ tok->width = OPAL_WIDTH_MEDIUM;
+
+ if (pos[0] & MEDIUM_ATOM_BYTESTRING)
+ tok->type = OPAL_DTA_TOKENID_BYTESTRING;
+ else if (pos[0] & MEDIUM_ATOM_SIGNED)
+ tok->type = OPAL_DTA_TOKENID_SINT;
+ else
+ tok->type = OPAL_DTA_TOKENID_UINT;
+
+ return tok->len;
+}
+
+#define LONG_ATOM_ID (BIT(7) | BIT(6) | BIT(5))
+#define LONG_ATOM_BYTESTRING BIT(1)
+#define LONG_ATOM_SIGNED BIT(0)
+static size_t response_parse_long(struct opal_resp_tok *tok,
+ const u8 *pos)
+{
+ tok->pos = pos;
+ tok->len = ((pos[1] << 16) | (pos[2] << 8) | pos[3]) + 4;
+ tok->width = OPAL_WIDTH_LONG;
+
+ if (pos[0] & LONG_ATOM_BYTESTRING)
+ tok->type = OPAL_DTA_TOKENID_BYTESTRING;
+ else if (pos[0] & LONG_ATOM_SIGNED)
+ tok->type = OPAL_DTA_TOKENID_SINT;
+ else
+ tok->type = OPAL_DTA_TOKENID_UINT;
+
+ return tok->len;
+}
+
+static size_t response_parse_token(struct opal_resp_tok *tok,
+ const u8 *pos)
+{
+ tok->pos = pos;
+ tok->len = 1;
+ tok->type = OPAL_DTA_TOKENID_TOKEN;
+ tok->width = OPAL_WIDTH_TOKEN;
+
+ return tok->len;
+}
+
+static int response_parse(const u8 *buf, size_t length,
+ struct parsed_resp *resp)
+{
+ const struct opal_header *hdr;
+ struct opal_resp_tok *iter;
+ int ret, num_entries = 0;
+ u32 cpos = 0, total;
+ size_t token_length;
+ const u8 *pos;
+
+ if (!buf)
+ return -EFAULT;
+
+ if (!resp)
+ return -EFAULT;
+
+ hdr = (struct opal_header *)buf;
+ pos = buf;
+ pos += sizeof(*hdr);
+
+ pr_debug("Response size: cp: %d, pkt: %d, subpkt: %d\n",
+ be32_to_cpu(hdr->cp.length),
+ be32_to_cpu(hdr->pkt.length),
+ be32_to_cpu(hdr->subpkt.length));
+
+ if ((hdr->cp.length == 0)
+ || (hdr->pkt.length == 0)
+ || (hdr->subpkt.length == 0)) {
+ pr_err("Bad header length. cp: %d, pkt: %d, subpkt: %d\n",
+ be32_to_cpu(hdr->cp.length),
+ be32_to_cpu(hdr->pkt.length),
+ be32_to_cpu(hdr->subpkt.length));
+ print_buffer(pos, sizeof(*hdr));
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (pos > buf + length) {
+ ret = -EFAULT;
+ goto err;
+ }
+
+ iter = resp->toks;
+ total = be32_to_cpu(hdr->subpkt.length);
+ print_buffer(pos, total);
+ while (cpos < total) {
+ if (!(pos[0] & 0x80)) /* tiny atom */
+ token_length = response_parse_tiny(iter, pos);
+ else if (!(pos[0] & 0x40)) /* short atom */
+ token_length = response_parse_short(iter, pos);
+ else if (!(pos[0] & 0x20)) /* medium atom */
+ token_length = response_parse_medium(iter, pos);
+ else if (!(pos[0] & 0x10)) /* long atom */
+ token_length = response_parse_long(iter, pos);
+ else /* TOKEN */
+ token_length = response_parse_token(iter, pos);
+
+ if (token_length == -EINVAL) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ pos += token_length;
+ cpos += token_length;
+ iter++;
+ num_entries++;
+ }
+
+ if (num_entries == 0) {
+ pr_err("Couldn't parse response.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ resp->num = num_entries;
+
+ return 0;
+err:
+ return ret;
+}
+
+static size_t response_get_string(const struct parsed_resp *resp, int n,
+ const char **store)
+{
+ *store = NULL;
+ if (!resp) {
+ pr_err("Response is NULL\n");
+ return 0;
+ }
+
+ if (n > resp->num) {
+ pr_err("Response has %d tokens. Can't access %d\n",
+ resp->num, n);
+ return 0;
+ }
+
+ if (resp->toks[n].type != OPAL_DTA_TOKENID_BYTESTRING) {
+ pr_err("Token is not a byte string!\n");
+ return 0;
+ }
+
+ *store = resp->toks[n].pos + 1;
+ return resp->toks[n].len - 1;
+}
+
+static u64 response_get_u64(const struct parsed_resp *resp, int n)
+{
+ if (!resp) {
+ pr_err("Response is NULL\n");
+ return 0;
+ }
+
+ if (n > resp->num) {
+ pr_err("Response has %d tokens. Can't access %d\n",
+ resp->num, n);
+ return 0;
+ }
+
+ if (resp->toks[n].type != OPAL_DTA_TOKENID_UINT) {
+ pr_err("Token is not unsigned it: %d\n",
+ resp->toks[n].type);
+ return 0;
+ }
+
+ if (!((resp->toks[n].width == OPAL_WIDTH_TINY) ||
+ (resp->toks[n].width == OPAL_WIDTH_SHORT))) {
+ pr_err("Atom is not short or tiny: %d\n",
+ resp->toks[n].width);
+ return 0;
+ }
+
+ return resp->toks[n].stored.u;
+}
+
+static u8 response_status(const struct parsed_resp *resp)
+{
+ if ((token_type(resp, 0) == OPAL_DTA_TOKENID_TOKEN)
+ && (response_get_token(resp, 0) == OPAL_ENDOFSESSION)) {
+ return 0;
+ }
+
+ if (resp->num < 5)
+ return DTAERROR_NO_METHOD_STATUS;
+
+ if ((token_type(resp, resp->num - 1) != OPAL_DTA_TOKENID_TOKEN) ||
+ (token_type(resp, resp->num - 5) != OPAL_DTA_TOKENID_TOKEN) ||
+ (response_get_token(resp, resp->num - 1) != OPAL_ENDLIST) ||
+ (response_get_token(resp, resp->num - 5) != OPAL_STARTLIST))
+ return DTAERROR_NO_METHOD_STATUS;
+
+ return response_get_u64(resp, resp->num - 4);
+}
+
+/* Parses and checks for errors */
+static int parse_and_check_status(struct opal_dev *dev)
+{
+ struct opal_cmd *cmd;
+ int error;
+
+ cmd = &dev->cmd;
+ print_buffer(cmd->cmd, cmd->pos);
+
+ error = response_parse(cmd->resp, IO_BUFFER_LENGTH, &dev->parsed);
+ if (error) {
+ pr_err("%s: Couldn't parse response.\n", dev->disk_name);
+ goto err_return;
+ }
+
+ error = response_status(&dev->parsed);
+ if (error)
+ pr_err("%s: Response Status: %d\n", dev->disk_name,
+ error);
+
+ err_return:
+ return error;
+}
+
+static void clear_opal_cmd(struct opal_cmd *cmd)
+{
+ cmd->pos = sizeof(struct opal_header);
+ memset(cmd->cmd, 0, IO_BUFFER_LENGTH);
+ cmd->cb = NULL;
+ cmd->cb_data = NULL;
+}
+
+static int start_opal_session_cont(void *data)
+{
+ struct opal_dev *dev = data;
+ u32 HSN, TSN;
+ int error = 0;
+
+ error = parse_and_check_status(dev);
+ if (error)
+ goto err_return;
+
+ HSN = response_get_u64(&dev->parsed, 4);
+ TSN = response_get_u64(&dev->parsed, 5);
+
+ if (HSN == 0 && TSN == 0) {
+ pr_err("%s: Couldn't authenticate session\n", dev->disk_name);
+ error = -EPERM;
+ goto err_return;
+ }
+
+ dev->HSN = HSN;
+ dev->TSN = TSN;
+
+err_return:
+ return error;
+}
+
+struct key *request_user_key(const char *master_desc, const u8 **master_key,
+ size_t *master_keylen)
+{
+ const struct user_key_payload *upayload;
+ struct key *ukey;
+
+ ukey = request_key(&key_type_user, master_desc, NULL);
+ if (IS_ERR(ukey))
+ goto error;
+
+ down_read(&ukey->sem);
+ upayload = user_key_payload(ukey);
+ *master_key = upayload->data;
+ *master_keylen = upayload->datalen;
+error:
+ return ukey;
+}
+
+static int get_opal_key(struct opal_dev *dev)
+{
+ struct key *ukey = NULL;
+ const u8 *tmpkey = NULL;
+ size_t tmplen;
+ int ret = 0;
+
+ if (dev->key_type == OPAL_KEY_PLAIN) {
+ tmpkey = dev->key_name;
+ tmplen = dev->key_name_len;
+ } else if (dev->key_type == OPAL_KEY_KEYRING) {
+ ukey = request_user_key(dev->key_name, &tmpkey, &tmplen);
+ if (IS_ERR(ukey)) {
+ pr_err("%s: Can't retrieve key: %ld\n", dev->disk_name,
+ PTR_ERR(ukey));
+ return PTR_ERR(ukey);
+ }
+ } else {
+ pr_err("Requested invalid key type: %d\n", dev->key_type);
+ return -EINVAL;
+ }
+
+ if (tmplen > OPAL_KEY_MAX) {
+ pr_err("Requested key with invalid size: %zd\n", tmplen);
+ ret = -EINVAL;
+ goto err_exit;
+ }
+
+ dev->key_len = tmplen;
+ if (!memcpy(dev->key, tmpkey, tmplen)) {
+ pr_err("Error when copying key");
+ ret = -EFAULT;
+ goto err_exit;
+ }
+
+err_exit:
+ key_put(ukey);
+
+ return 0;
+}
+
+static void clean_opal_key(struct opal_dev *dev)
+{
+ memset(dev->key, 0, OPAL_KEY_MAX);
+ dev->key_len = 0;
+}
+
+static inline void clean_function_data(struct opal_dev *dev)
+{
+ dev->func_data = NULL;
+ dev->num_func_data = 0;
+}
+
+/* This is a generic continuation.
+ * We use this when we don't care about the response data
+ * and simply want to check the status and continue.
+ */
+static int generic_cont(void *data)
+{
+ struct opal_dev *dev = data;
+
+ return parse_and_check_status(dev);
+}
+
+static int end_session_cont(void *data)
+{
+ struct opal_dev *dev = data;
+
+ dev->HSN = 0;
+ dev->TSN = 0;
+ return generic_cont(data);
+}
+
+static int finalize_and_send(struct opal_dev *dev, struct opal_cmd *cmd,
+ cont_fn cont)
+{
+ int ret;
+
+ ret = cmd_finalize(cmd, dev->HSN, dev->TSN);
+ if (ret) {
+ pr_err("%s: Error finalizing command buffer: %d\n",
+ dev->disk_name, ret);
+ return ret;
+ }
+
+ print_buffer(cmd->cmd, cmd->pos);
+
+ return opal_send_recv(dev, cont);
+}
+
+static int gen_key(struct opal_dev *dev)
+{
+ const u8 *method;
+ u8 uid[OPAL_UID_LENGTH];
+ struct opal_cmd *cmd;
+ int ret;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ memcpy(uid, dev->prev_data, min(sizeof(uid), dev->prev_d_len));
+ method = OPALMETHOD[OPAL_GENKEY];
+ kfree(dev->prev_data);
+ dev->prev_data = NULL;
+
+ ret = test_and_add_token_va(cmd, "c2s 2c",
+ OPAL_CALL,
+ uid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_ENDLIST);
+ if (ret < 0) {
+ pr_err("%s: Error building gen key command\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, generic_cont);
+}
+
+static int get_active_key_cont(void *data)
+{
+ struct opal_dev *dev = data;
+ const char *activekey;
+ size_t keylen;
+ int error = 0;
+
+ error = parse_and_check_status(dev);
+ if (error)
+ goto err_return;
+ keylen = response_get_string(&dev->parsed, 4, &activekey);
+ if (!activekey) {
+ pr_err("%s: Couldn't extract the Activekey from the response\n",
+ __func__);
+ error = 0x0A;
+ goto err_return;
+ }
+ dev->prev_data = kmemdup(activekey, keylen, GFP_KERNEL);
+
+ if (!dev->prev_data) {
+ error = -ENOMEM;
+ goto err_return;
+ }
+
+ dev->prev_d_len = keylen;
+
+ err_return:
+ return error;
+}
+
+static int get_active_key(struct opal_dev *dev)
+{
+ const u8 *method;
+ u8 uid[OPAL_UID_LENGTH];
+ struct opal_cmd *cmd;
+ int ret;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ method = OPALMETHOD[OPAL_GET];
+
+ ret = build_locking_range(uid, sizeof(uid), dev->lr);
+ if (ret < 0) {
+ pr_err("%s: Can't build locking range\n", dev->disk_name);
+ return -EINVAL;
+ }
+
+ ret = test_and_add_token_va(cmd, "c2s 6c 4c 2c",
+ OPAL_CALL,
+ uid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_03, /* startCloumn */
+ OPAL_TINY_UINT_10, /* ActiveKey */
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_04, /* endColumn */
+ OPAL_TINY_UINT_10, /* ActiveKey */
+ OPAL_ENDNAME,
+
+ OPAL_ENDLIST,
+ OPAL_ENDLIST);
+ if (ret < 0) {
+ pr_err("%s: Error building get active key command\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, get_active_key_cont);
+}
+
+static inline int enable_global_lr(struct opal_cmd *cmd, u8 *uid,
+ struct opal_user_lr_setup *setup)
+{
+ const u8 *method;
+
+ method = OPALMETHOD[OPAL_SET];
+ return test_and_add_token_va(cmd, "c2s 4c 2cuc 2cuc 4c 4c 3c",
+ OPAL_CALL,
+ uid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_VALUES,
+ OPAL_STARTLIST,
+
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_05, /* ReadLockEnabled */
+ !!setup->RLE,
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_06, /* WriteLockEnabled */
+ !!setup->WLE,
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPAL_READLOCKED,
+ OPAL_FALSE,
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPAL_WRITELOCKED,
+ OPAL_FALSE,
+ OPAL_ENDNAME,
+
+ OPAL_ENDLIST,
+ OPAL_ENDNAME,
+ OPAL_ENDLIST);
+}
+
+static int setup_locking_range(struct opal_dev *dev)
+{
+ const u8 *method;
+ u8 uid[OPAL_UID_LENGTH];
+ struct opal_cmd *cmd;
+ struct opal_user_lr_setup *setup;
+ int ret;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ method = OPALMETHOD[OPAL_SET];
+ ret = build_locking_range(uid, sizeof(uid), dev->lr);
+ if (ret < 0) {
+ pr_err("%s: Can't build locking range\n", dev->disk_name);
+ return -EINVAL;
+ }
+ setup = dev->func_data[dev->state - 1];
+ if (dev->lr == 0)
+ ret = enable_global_lr(cmd, uid, setup);
+ else
+ ret = test_and_add_token_va(cmd, "c2s 4c 2cuc 2cuc 2cuc 2cu 4c",
+ OPAL_CALL,
+ uid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_VALUES,
+ OPAL_STARTLIST,
+
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_03, /* Range Start */
+ setup->range_start,
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_04, /* Range Length */
+ setup->range_length,
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_05, /* ReadLockEnabled */
+ !!setup->RLE,
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_06, /* WriteLockEnabled */
+ !!setup->WLE,
+
+ OPAL_ENDNAME,
+ OPAL_ENDLIST,
+ OPAL_ENDNAME,
+ OPAL_ENDLIST);
+ if (ret < 0) {
+ pr_err("%s: Error building Setup Locking range command.\n",
+ dev->disk_name);
+ return ret;
+
+ }
+
+ return finalize_and_send(dev, cmd, generic_cont);
+}
+
+static int start_adminsp_opal_session(struct opal_dev *dev,
+ enum OPAL_UID auth,
+ const char *key,
+ u8 key_len)
+{
+ const u8 *method, *smuid, *admin_sp, *hsa;
+ struct opal_cmd *cmd;
+ u32 HSN;
+ int ret;
+
+ if (key == NULL && auth != OPAL_ANYBODY_UID) {
+ pr_err("%s: Attempted to open ADMIN_SP Session without a Host" \
+ "Challenge, and not as the Anybody UID\n", __func__);
+ return 1;
+ }
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+
+ set_comID(cmd, dev->comID);
+ HSN = GENERIC_HOST_SESSION_NUM;
+
+ smuid = OPALUID[OPAL_SMUID_UID];
+ method = OPALMETHOD[OPAL_STARTSESSION];
+ admin_sp = OPALUID[OPAL_ADMINSP_UID];
+
+ ret = test_and_add_token_va(cmd, "c2s cusc",
+ OPAL_CALL,
+ smuid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+ OPAL_STARTLIST,
+ HSN,
+ admin_sp, OPAL_UID_LENGTH,
+ OPAL_TINY_UINT_01);
+ if (ret < 0) {
+ pr_err("%s: Error building start adminsp session command.\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ switch (auth) {
+ case OPAL_ANYBODY_UID:
+ /* nothing left to do for anybody, just end and finalize */
+ ret = test_and_add_token_va(cmd, "c",
+ OPAL_ENDLIST);
+ break;
+ case OPAL_SID_UID:
+ hsa = OPALUID[OPAL_SID_UID];
+ ret = test_and_add_token_va(cmd, "2c s 3c s 2c",
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_00, /* HostChallenge */
+ key, key_len,
+ OPAL_ENDNAME,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_03, /* HostSignAuth */
+ hsa, OPAL_UID_LENGTH,
+ OPAL_ENDNAME,
+ OPAL_ENDLIST);
+ break;
+ default:
+ pr_err("Cannot start Admin SP session with auth %d\n", auth);
+ return 1;
+ }
+
+ if (ret < 0) {
+ pr_err("%s: Error building start adminsp session command.\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, start_opal_session_cont);
+}
+
+static int start_anybodyASP_opal_session(struct opal_dev *dev)
+{
+ return start_adminsp_opal_session(dev, OPAL_ANYBODY_UID, NULL, 0);
+}
+
+static int start_SIDASP_opal_session(struct opal_dev *dev)
+{
+ int ret;
+ const u8 *key = dev->prev_data;
+
+ if (!key)
+ ret = start_adminsp_opal_session(dev, OPAL_SID_UID, dev->key,
+ dev->key_len);
+ else {
+ ret = start_adminsp_opal_session(dev, OPAL_SID_UID, key,
+ dev->prev_d_len);
+ kfree(key);
+ dev->prev_data = NULL;
+ }
+ return ret;
+}
+
+static int start_lockingsp_opal_session(struct opal_dev *dev,
+ enum OPAL_UID auth, const u8 *key,
+ u8 key_len)
+{
+
+ const u8 *method, *smuid, *locking_sp, *hsa;
+ struct opal_cmd *cmd;
+ size_t klen = key_len;
+ u32 HSN;
+ int ret;
+
+ if (key == NULL) {
+ pr_err("Cannot start Locking SP session without a key\n");
+ return -EINVAL;
+ }
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+
+ set_comID(cmd, dev->comID);
+ HSN = GENERIC_HOST_SESSION_NUM;
+
+ smuid = OPALUID[OPAL_SMUID_UID];
+ method = OPALMETHOD[OPAL_STARTSESSION];
+ locking_sp = OPALUID[OPAL_LOCKINGSP_UID];
+ hsa = OPALUID[auth];
+
+ ret = test_and_add_token_va(cmd, "c2s cusc 2csc 2csc c",
+ OPAL_CALL,
+ smuid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ HSN,
+ locking_sp, OPAL_UID_LENGTH,
+ OPAL_TINY_UINT_01,
+
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_00, /* HostChallenge */
+ key, klen,
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_03, /* Host Sign Authority */
+ hsa, OPAL_UID_LENGTH,
+ OPAL_ENDNAME,
+
+ OPAL_ENDLIST);
+
+ if (ret < 0) {
+ pr_err("%s: Error building start adminsp session command.\n",
+ dev->disk_name);
+ return ret;
+ }
+ return finalize_and_send(dev, cmd, start_opal_session_cont);
+}
+
+static inline int start_admin1LSP_opal_session(struct opal_dev *dev)
+{
+ return start_lockingsp_opal_session(dev, OPAL_ADMIN1_UID,
+ dev->key, dev->key_len);
+}
+
+static int start_auth_opal_session(struct opal_dev *dev)
+{
+ const u8 *method, *smuid, *locking_sp;
+ u8 lk_ul_user[OPAL_UID_LENGTH];
+ struct opal_cmd *cmd;
+ u32 HSN;
+ int ret;
+ struct opal_user_info *uinfo;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+
+ set_comID(cmd, dev->comID);
+
+ HSN = GENERIC_HOST_SESSION_NUM;
+
+ uinfo = dev->func_data[dev->state - 1];
+
+ smuid = OPALUID[OPAL_SMUID_UID];
+ method = OPALMETHOD[OPAL_STARTSESSION];
+ locking_sp = OPALUID[OPAL_LOCKINGSP_UID];
+
+ if (uinfo->SUM) {
+ ret = build_locking_user(lk_ul_user, sizeof(lk_ul_user),
+ dev->lr);
+ if (ret < 0) {
+ pr_err("%s: Can't build locking user\n",
+ dev->disk_name);
+ return ret;
+ }
+ } else if (uinfo->who != OPAL_ADMIN1 && !uinfo->SUM) {
+ ret = build_locking_user(lk_ul_user, sizeof(lk_ul_user),
+ uinfo->who - 1);
+ if (ret < 0) {
+ pr_err("%s: Can't build locking user\n",
+ dev->disk_name);
+ return ret;
+ }
+ } else
+ memcpy(lk_ul_user, OPALUID[OPAL_ADMIN1_UID], OPAL_UID_LENGTH);
+
+
+ ret = test_and_add_token_va(cmd, "c2s cus3cs3c s 2c",
+ OPAL_CALL,
+ smuid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ HSN,
+ locking_sp, OPAL_UID_LENGTH,
+ OPAL_TINY_UINT_01,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_00,
+ dev->key, dev->key_len,
+ OPAL_ENDNAME,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_03,
+
+ lk_ul_user, OPAL_UID_LENGTH,
+
+ OPAL_ENDNAME,
+ OPAL_ENDLIST);
+
+ if (ret < 0) {
+ pr_err("%s: Error building STARTSESSION command.\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, start_opal_session_cont);
+}
+
+static int revert_tper(struct opal_dev *dev)
+{
+ const u8 *method, *smuid;
+ struct opal_cmd *cmd;
+ int ret;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+
+ set_comID(cmd, dev->comID);
+
+ smuid = OPALUID[OPAL_ADMINSP_UID];
+ method = OPALMETHOD[OPAL_REVERT];
+
+ ret = test_and_add_token_va(cmd, "c2s 2c",
+ OPAL_CALL,
+ smuid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+ OPAL_STARTLIST,
+ OPAL_ENDLIST);
+ if (ret < 0) {
+ pr_err("%s: Error building REVERT TPER command.\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, generic_cont);
+}
+
+static int internal_activate_user(struct opal_dev *dev)
+{
+ const u8 *method;
+ u8 uid[OPAL_UID_LENGTH];
+ struct opal_cmd *cmd;
+ int ret;
+ struct opal_key_and_user *act;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ act = dev->func_data[dev->state - 1];
+
+ memcpy(uid, OPALUID[OPAL_USER1_UID], OPAL_UID_LENGTH);
+ uid[7] = act->who.who;
+
+ method = OPALMETHOD[OPAL_SET];
+
+ ret = test_and_add_token_va(cmd, "c2s 3c c 4c 3c",
+ OPAL_CALL,
+ uid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_01, /* Values */
+
+ OPAL_STARTLIST,
+
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_05, /* Enabled */
+ OPAL_TINY_UINT_01, /* True */
+ OPAL_ENDNAME,
+
+ OPAL_ENDLIST,
+ OPAL_ENDNAME,
+ OPAL_ENDLIST);
+
+ if (ret < 0) {
+ pr_err("%s: Error building Activate UserN command.\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, generic_cont);
+}
+
+static int erase_locking_range(struct opal_dev *dev)
+{
+ const u8 *method;
+ u8 uid[OPAL_UID_LENGTH];
+ struct opal_cmd *cmd;
+ int ret;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ method = OPALMETHOD[OPAL_ERASE];
+
+ if (build_locking_range(uid, sizeof(uid), dev->lr) < 0) {
+ pr_err("%s: Can't build locking range\n", dev->disk_name);
+ return -EINVAL;
+ }
+
+ ret = test_and_add_token_va(cmd, "c2s 2c",
+ OPAL_CALL,
+ uid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_ENDLIST);
+
+ if (ret < 0) {
+ pr_err("%s: Error building Erase Locking Range Cmmand.\n",
+ dev->disk_name);
+ return ret;
+ }
+ return finalize_and_send(dev, cmd, generic_cont);
+}
+
+static int set_mbr_done(struct opal_dev *dev)
+{
+ const u8 *method, *uid;
+ struct opal_cmd *cmd;
+ int ret;
+ u8 mbr_done_tf = *(u8 *)dev->func_data[dev->state - 1];
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ method = OPALMETHOD[OPAL_SET];
+ uid = OPALUID[OPAL_MBRCONTROL];
+
+ ret = test_and_add_token_va(cmd, "c2s 3c 6c 2c",
+ OPAL_CALL,
+ uid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_VALUES,
+
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_02, /* Done */
+ mbr_done_tf, /* Done T or F */
+ OPAL_ENDNAME,
+ OPAL_ENDLIST,
+
+ OPAL_ENDNAME,
+ OPAL_ENDLIST);
+ if (ret < 0) {
+ pr_err("%s: Error Building set MBR Done command\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, generic_cont);
+}
+
+static int set_mbr_enable_disable(struct opal_dev *dev)
+{
+ const u8 *method, *uid;
+ struct opal_cmd *cmd;
+ int ret;
+ u8 mbr_en_dis = *(u8 *)dev->func_data[dev->state - 1];
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ method = OPALMETHOD[OPAL_SET];
+ uid = OPALUID[OPAL_MBRCONTROL];
+
+ ret = test_and_add_token_va(cmd, "c2s 3c 6c 2c",
+ OPAL_CALL,
+ uid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_VALUES,
+
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_01, /* Enable */
+ mbr_en_dis, /* Enable or Disable */
+ OPAL_ENDNAME,
+ OPAL_ENDLIST,
+
+ OPAL_ENDNAME,
+ OPAL_ENDLIST);
+ if (ret < 0) {
+ pr_err("%s: Error Building set MBR done command\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, generic_cont);
+}
+
+static int set_new_pw(struct opal_dev *dev)
+{
+ const u8 *method;
+ u8 cpin_uid[OPAL_UID_LENGTH];
+ struct opal_cmd *cmd;
+ int ret;
+ struct opal_new_pw *pw;
+ size_t key_len;
+ u8 *key;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ pw = dev->func_data[dev->state - 1];
+ key = pw->new_pin.key;
+ key_len = pw->new_pin.key_len;
+ memcpy(cpin_uid, OPALUID[OPAL_C_PIN_ADMIN1], OPAL_UID_LENGTH);
+
+ if (pw->user_for_pw != OPAL_ADMIN1) {
+ cpin_uid[5] = 0x03;
+ if (pw->who.SUM)
+ cpin_uid[7] = pw->new_pin.lr + 1;
+ else
+ cpin_uid[7] = pw->user_for_pw;
+ }
+
+ method = OPALMETHOD[OPAL_SET];
+
+ ret = test_and_add_token_va(cmd, "c2s 3c 3cs2c 2c",
+ OPAL_CALL,
+ cpin_uid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_01, /* Values */
+
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_03, /* PIN */
+ key, key_len,
+ OPAL_ENDNAME,
+ OPAL_ENDLIST,
+
+ OPAL_ENDNAME,
+ OPAL_ENDLIST);
+
+ if (ret < 0) {
+ pr_err("%s: Error building SET AMIN1 PIN command.\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, generic_cont);
+}
+
+static int set_sid_cpin_pin(struct opal_dev *dev)
+{
+ const u8 *method, *cpin_uid;
+ struct opal_cmd *cmd;
+ int ret;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ cpin_uid = OPALUID[OPAL_C_PIN_SID];
+ method = OPALMETHOD[OPAL_SET];
+
+ ret = test_and_add_token_va(cmd, "c2s 2c 4cs2c 2c",
+ OPAL_CALL,
+ cpin_uid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+
+ OPAL_TINY_UINT_01, /* Values */
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_03, /* PIN */
+ dev->key, dev->key_len,
+ OPAL_ENDNAME,
+ OPAL_ENDLIST,
+
+ OPAL_ENDNAME,
+ OPAL_ENDLIST);
+
+ if (ret < 0) {
+ pr_err("%s: Error building SET CPIN PIN command.\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, generic_cont);
+}
+
+static int query_locking_range_cont(void *data)
+{
+ struct opal_dev *dev = data;
+ int error;
+
+ error = parse_and_check_status(dev);
+ if (error)
+ goto err_return;
+
+ dev->start = response_get_u64(&dev->parsed, 4);
+ dev->length = response_get_u64(&dev->parsed, 8);
+
+err_return:
+ return error;
+}
+
+static int query_locking_range(struct opal_dev *dev)
+{
+ u8 lr_buffer[OPAL_UID_LENGTH];
+ struct opal_cmd *cmd;
+ const u8 *method;
+ int ret;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+
+ method = OPALMETHOD[OPAL_GET];
+
+ if (build_locking_range(lr_buffer, sizeof(lr_buffer), dev->lr) < 0) {
+ pr_err("%s: Can't build locking range\n", dev->disk_name);
+ return -EINVAL;
+ }
+
+ set_comID(cmd, dev->comID);
+
+ ret = test_and_add_token_va(cmd, "c2s 12c",
+ OPAL_CALL,
+ lr_buffer, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_STARTCOLUMN,
+ OPAL_RANGESTART,
+ OPAL_ENDNAME,
+ OPAL_STARTNAME,
+ OPAL_ENDCOLUMN,
+ OPAL_RANGELENGTH,
+ OPAL_ENDNAME,
+ OPAL_ENDLIST,
+ OPAL_ENDLIST);
+
+ if (ret < 0) {
+ pr_err("%s: Error building GET Locking Range command.\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, query_locking_range_cont);
+}
+
+static int add_user_to_lr(struct opal_dev *dev)
+{
+ u8 lr_buffer[OPAL_UID_LENGTH];
+ u8 user_uid[OPAL_UID_LENGTH];
+ struct opal_cmd *cmd;
+ const u8 *method;
+ struct opal_lock_unlock *lkul;
+ int ret;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ method = OPALMETHOD[OPAL_SET];
+
+ lkul = dev->func_data[dev->state - 1];
+
+ memcpy(lr_buffer, OPALUID[OPAL_LOCKINGRANGE_ACE_RDLOCKED],
+ OPAL_UID_LENGTH);
+
+ if (lkul->l_state == OPAL_RW)
+ memcpy(lr_buffer, OPALUID[OPAL_LOCKINGRANGE_ACE_WRLOCKED],
+ OPAL_UID_LENGTH);
+
+ lr_buffer[7] = dev->lr;
+
+ memcpy(user_uid, OPALUID[OPAL_USER1_UID], OPAL_UID_LENGTH);
+ user_uid[7] = lkul->authority.who;
+
+ ret = test_and_add_token_va(cmd, "c2s 3c 3c 2c 2sc c2sc cs2c 5c",
+ OPAL_CALL,
+ lr_buffer, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_01, /* Values */
+
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_03, /* BooleanExpr */
+
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+
+ OPALUID[OPAL_HALF_UID_AUTHORITY_OBJ_REF],
+ OPAL_UID_LENGTH_HALF,
+ user_uid, OPAL_UID_LENGTH,
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPALUID[OPAL_HALF_UID_AUTHORITY_OBJ_REF],
+ OPAL_UID_LENGTH_HALF,
+ user_uid, OPAL_UID_LENGTH,
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPALUID[OPAL_HALF_UID_BOOLEAN_ACE],
+ OPAL_UID_LENGTH_HALF,
+ OPAL_TINY_UINT_01,
+ OPAL_ENDNAME,
+
+ OPAL_ENDLIST,
+ OPAL_ENDNAME,
+ OPAL_ENDLIST,
+ OPAL_ENDNAME,
+ OPAL_ENDLIST);
+ if (ret < 0) {
+ pr_err("%s: Error building add user to locking range command.\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, generic_cont);
+}
+
+static int lock_unlock_locking_range(struct opal_dev *dev)
+{
+ u8 lr_buffer[OPAL_UID_LENGTH];
+ struct opal_cmd *cmd;
+ const u8 *method;
+ struct opal_lock_unlock *lkul;
+ int ret;
+ u8 read_locked = 1, write_locked = 1;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ method = OPALMETHOD[OPAL_SET];
+ lkul = dev->func_data[dev->state - 1];
+ if (build_locking_range(lr_buffer, sizeof(lr_buffer), dev->lr) < 0) {
+ pr_err("%s: Can't build locking range\n", dev->disk_name);
+ return -EINVAL;
+ }
+
+ switch (lkul->l_state) {
+ case OPAL_RO:
+ read_locked = 0;
+ write_locked = 1;
+ break;
+ case OPAL_RW:
+ read_locked = 0;
+ write_locked = 0;
+ break;
+ case OPAL_LK:
+ /* vars are initalized to locked */
+ break;
+ default:
+ pr_err("Tried to set an invalid locking state... returning to uland\n");
+ return 1;
+ }
+
+ ret = test_and_add_token_va(cmd, "c2sc 3c 4c 4c 3c",
+ OPAL_CALL,
+ lr_buffer, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+ OPAL_STARTLIST,
+
+ OPAL_STARTNAME,
+ OPAL_VALUES,
+ OPAL_STARTLIST,
+
+ OPAL_STARTNAME,
+ OPAL_READLOCKED,
+ read_locked,
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPAL_WRITELOCKED,
+ write_locked,
+ OPAL_ENDNAME,
+
+ OPAL_ENDLIST,
+ OPAL_ENDNAME,
+ OPAL_ENDLIST);
+
+ if (ret < 0) {
+ pr_err("%s: Error building SET command.\n", dev->disk_name);
+ return ret;
+ }
+ return finalize_and_send(dev, cmd, generic_cont);
+}
+
+
+static int lock_unlock_locking_range_SUM(struct opal_dev *dev)
+{
+ u8 lr_buffer[OPAL_UID_LENGTH];
+ struct opal_cmd *cmd;
+ const u8 *method;
+ struct opal_lock_unlock *lkul;
+ int ret;
+ u8 read_locked = 1, write_locked = 1;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ method = OPALMETHOD[OPAL_SET];
+ lkul = dev->func_data[dev->state - 1];
+ if (build_locking_range(lr_buffer, sizeof(lr_buffer), dev->lr) < 0) {
+ pr_err("%s: Can't build locking range\n", dev->disk_name);
+ return -EINVAL;
+ }
+
+ switch (lkul->l_state) {
+ case OPAL_RO:
+ read_locked = 0;
+ write_locked = 1;
+ break;
+ case OPAL_RW:
+ read_locked = 0;
+ write_locked = 0;
+ break;
+ case OPAL_LK:
+ /* vars are initalized to locked */
+ break;
+ default:
+ pr_err("Tried to set an invalid locking state.\n");
+ return 1;
+ }
+
+ ret = test_and_add_token_va(cmd, "c2sc 3c 4c 4c 4c 4c 3c",
+ OPAL_CALL,
+ lr_buffer, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+ OPAL_STARTLIST,
+
+ OPAL_STARTNAME,
+ OPAL_VALUES,
+ OPAL_STARTLIST,
+
+ OPAL_STARTNAME,
+ OPAL_READLOCKENABLED,
+ OPAL_TRUE,
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPAL_WRITELOCKENABLED,
+ OPAL_TRUE,
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPAL_READLOCKED,
+ read_locked,
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPAL_WRITELOCKED,
+ write_locked,
+ OPAL_ENDNAME,
+
+ OPAL_ENDLIST,
+ OPAL_ENDNAME,
+ OPAL_ENDLIST);
+ if (ret < 0) {
+ pr_err("%s: Error building SET command.\n", dev->disk_name);
+ return ret;
+ }
+ return finalize_and_send(dev, cmd, generic_cont);
+}
+
+int activate_lsp(struct opal_dev *dev)
+{
+ u8 user_lr[OPAL_UID_LENGTH];
+ const u8 *method, *uid;
+ struct opal_cmd *cmd;
+ int ret;
+ size_t uint_3 = 0x83;
+
+ cmd = &dev->cmd;
+
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ uid = OPALUID[OPAL_LOCKINGSP_UID];
+ method = OPALMETHOD[OPAL_ACTIVATE];
+
+ ret = test_and_add_token_va(cmd, "c2s",
+ OPAL_CALL,
+ uid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH);
+ if (ret < 0) {
+ pr_err("%s: Error building Activate LockingSP command.\n",
+ dev->disk_name);
+ return ret;
+ }
+ /* Activating as SUM */
+ if (dev->lr > 0) {
+ ret = build_locking_range(user_lr, sizeof(user_lr), dev->lr);
+ if (ret < 0) {
+ pr_err("%s: Can't build locking user\n",
+ dev->disk_name);
+ return ret;
+ }
+ test_and_add_token_va(cmd, "2c 4c csc 2c",
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+
+ uint_3,
+ OPAL_TINY_UINT_06,
+ OPAL_TINY_UINT_00,
+ OPAL_TINY_UINT_00,
+
+ OPAL_STARTLIST,
+ user_lr, OPAL_UID_LENGTH,
+ OPAL_ENDLIST,
+
+ OPAL_ENDNAME,
+ OPAL_ENDLIST);
+ } else /* Actiave Normal Mode */
+ ret = test_and_add_token_va(cmd, "2c",
+ OPAL_STARTLIST,
+ OPAL_ENDLIST);
+
+ if (ret < 0) {
+ pr_err("%s: Error building Activate LockingSP command.\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, generic_cont);
+}
+
+static int get_lsp_lifecycle_cont(void *data)
+{
+ struct opal_dev *dev = data;
+ u8 lc_status;
+ int error = 0;
+
+ error = parse_and_check_status(dev);
+ if (error)
+ goto err_return;
+
+ lc_status = response_get_u64(&dev->parsed, 4);
+ /* 0x08 is Manufacured Inactive */
+ /* 0x09 is Manufactured */
+ if (lc_status != 0x08) {
+ pr_err("%s: Couldn't determine the status of the Lifcycle state\n",
+ dev->disk_name);
+ error = -ENODEV;
+ goto err_return;
+ }
+
+err_return:
+ return error;
+}
+
+/* Determine if we're in the Manufactured Inactive or Active state */
+int get_lsp_lifecycle(struct opal_dev *dev)
+{
+ struct opal_cmd *cmd;
+ const u8 *method, *uid;
+ int ret;
+
+ cmd = &dev->cmd;
+
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ uid = OPALUID[OPAL_LOCKINGSP_UID];
+ method = OPALMETHOD[OPAL_GET];
+
+ ret = test_and_add_token_va(cmd, "c2s 2c 4c 4c 2c",
+ OPAL_CALL,
+ uid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_STARTLIST,
+
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_03, /* Start Column */
+ OPAL_TINY_UINT_06, /* Lifcycle Column */
+ OPAL_ENDNAME,
+
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_04, /* End Column */
+ OPAL_TINY_UINT_06, /* Lifecycle Column */
+ OPAL_ENDNAME,
+
+ OPAL_ENDLIST,
+ OPAL_ENDLIST);
+
+ if (ret < 0) {
+ pr_err("%s: Error Building GET Lifecycle Status command\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, get_lsp_lifecycle_cont);
+}
+
+static int get_msid_cpin_pin_cont(void *data)
+{
+ const char *msid_pin;
+ struct opal_dev *dev = data;
+ size_t strlen;
+ int error = 0;
+
+ error = parse_and_check_status(dev);
+ if (error)
+ goto err_return;
+
+ strlen = response_get_string(&dev->parsed, 4, &msid_pin);
+ if (!msid_pin) {
+ pr_err("%s: Couldn't extract PIN from response\n", __func__);
+ error = 1;
+ goto err_return;
+ }
+
+ dev->prev_data = kmemdup(msid_pin, strlen, GFP_KERNEL);
+ if (!dev->prev_data) {
+ error = -ENOMEM;
+ goto err_return;
+ }
+
+ dev->prev_d_len = strlen;
+
+ err_return:
+ return error;
+}
+
+static int get_msid_cpin_pin(struct opal_dev *dev)
+{
+ const u8 *method, *smuid;
+ int ret;
+ struct opal_cmd *cmd;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+ set_comID(cmd, dev->comID);
+
+ smuid = OPALUID[OPAL_C_PIN_MSID];
+ method = OPALMETHOD[OPAL_GET];
+
+ ret = test_and_add_token_va(cmd, "c 2s 12c",
+ OPAL_CALL,
+
+ smuid, OPAL_UID_LENGTH,
+ method, OPAL_METHOD_LENGTH,
+
+ OPAL_STARTLIST,
+ OPAL_STARTLIST,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_03, /* Sart Column */
+ OPAL_TINY_UINT_03, /* PIN */
+ OPAL_ENDNAME,
+ OPAL_STARTNAME,
+ OPAL_TINY_UINT_04, /* End Column */
+ OPAL_TINY_UINT_03, /* PIN */
+ OPAL_ENDNAME,
+ OPAL_ENDLIST,
+ OPAL_ENDLIST);
+
+ if (ret < 0) {
+ pr_err("%s: Error building Get MSID CPIN PIN command.\n",
+ dev->disk_name);
+ return ret;
+ }
+
+ return finalize_and_send(dev, cmd, get_msid_cpin_pin_cont);
+}
+
+static void unlock_suspend_final(struct opal_dev *dev)
+{
+ dev->resume_from_suspend = false;
+ dev->resume_data = NULL;
+ dev->func_data = NULL;
+}
+
+static int build_end_opal_session(struct opal_dev *dev)
+{
+ struct opal_cmd *cmd;
+
+ cmd = &dev->cmd;
+ clear_opal_cmd(cmd);
+
+ set_comID(cmd, dev->comID);
+ return test_and_add_token_u8(cmd, OPAL_ENDOFSESSION);
+}
+
+static int end_opal_session(struct opal_dev *dev)
+{
+ int ret = build_end_opal_session(dev);
+
+ if (ret < 0)
+ return ret;
+ return finalize_and_send(dev, &dev->cmd, end_session_cont);
+}
+
+static struct opal_dev *find_opal_dev(dev_t majmin, u8 lr)
+{
+ struct opal_dev *iter, *opal_dev = NULL;
+
+ list_for_each_entry(iter, &opal_list, node) {
+ if (MAJOR(iter->majmin) != MAJOR(majmin) ||
+ MINOR(iter->majmin) != MINOR(majmin))
+ continue;
+
+ if (iter->lr == lr) {
+ opal_dev = iter;
+ break;
+ }
+ }
+ return opal_dev;
+}
+
+static int update_opal_dev(struct opal_dev *old_dev, struct opal_dev *new_dev)
+{
+ if (!atomic_add_unless(&old_dev->in_use, 1, 1)) {
+ pr_err("%s: dev was in use\n", __func__);
+ return -EBUSY;
+ }
+
+ old_dev->key_name_len = new_dev->key_name_len;
+ if (!memcpy(old_dev->key_name, new_dev->key_name, old_dev->key_name_len)) {
+ pr_err("%s: Error updating device:\n", old_dev->disk_name);
+ return -EFAULT;
+ }
+
+ if (!strncpy(old_dev->disk_name, new_dev->disk_name, DISK_NAME_LEN)) {
+ pr_err("%s: Error registering device: copying disk name\n",
+ old_dev->disk_name);
+ return -EFAULT;
+ }
+
+ old_dev->comID = new_dev->comID;
+ old_dev->start = new_dev->start;
+ old_dev->length = new_dev->length;
+ old_dev->align = new_dev->align;
+ old_dev->lowest_lba = new_dev->lowest_lba;
+ old_dev->state = new_dev->state;
+ old_dev->funcs = new_dev->funcs;
+ old_dev->majmin = new_dev->majmin;
+ old_dev->submit_fn = new_dev->submit_fn;
+ old_dev->submit_data = new_dev->submit_data;
+
+ clean_function_data(old_dev);
+
+ /*
+ * Won't be able to auto unlock this locking range based on block
+ * requestes.
+ */
+ if (old_dev->length == 0)
+ pr_warn("%s: Missing block information for locking range %d\n",
+ old_dev->disk_name, old_dev->lr);
+
+ return 0;
+}
+
+int opal_register_cont(struct opal_dev *new_dev)
+{
+ struct opal_dev *old_dev;
+ unsigned long flags;
+ int error = 0;
+
+ spin_lock_irqsave(&list_spinlock, flags);
+
+ old_dev = find_opal_dev(new_dev->majmin, new_dev->lr);
+ if (!old_dev) {
+ list_add_tail(&new_dev->node, &opal_list);
+ old_dev = new_dev;
+ } else {
+ if (old_dev == new_dev)
+ error = 0;
+ else {
+ error = update_opal_dev(old_dev, new_dev);
+ clean_opal_key(new_dev);
+ kfree(new_dev);
+ }
+ }
+
+ if (error)
+ list_del(&old_dev->node);
+
+ spin_unlock_irqrestore(&list_spinlock, flags);
+
+ if (!error)
+ pr_info("%s: Registered key for locking range: %d\n",
+ old_dev->disk_name, old_dev->lr);
+
+ return error;
+}
+
+const opal_step error_end_session[] = {
+ end_opal_session,
+ NULL,
+};
+static int end_opal_session_error(struct opal_dev *dev)
+{
+
+ dev->funcs = error_end_session;
+ dev->state = 0;
+ dev->error_cb = NULL;
+ return next(dev);
+}
+
+static struct opal_dev *alloc_opal_dev(struct block_device *bdev, u8 lr)
+{
+ struct opal_dev *opal_dev;
+ struct request_queue *q;
+ unsigned long dma_align;
+ const char *disk_name;
+ struct opal_cmd *cmd;
+ int ret;
+
+ opal_dev = kzalloc(sizeof(*opal_dev), GFP_KERNEL);
+ if (!opal_dev)
+ return ERR_PTR(-ENOMEM);
+
+ opal_dev->majmin = bdev->bd_dev;
+ opal_dev->lr = lr;
+ cmd = &opal_dev->cmd;
+ cmd->cmd = cmd->cmd_buf;
+ cmd->resp = cmd->resp_buf;
+
+ disk_name = bdev->bd_disk->disk_name;
+ if (!strncpy(opal_dev->disk_name, disk_name, DISK_NAME_LEN)) {
+ pr_err("%s: Error registering device: copying disk name\n",
+ disk_name);
+ ret = -EFAULT;
+ goto err_free_dev;
+ }
+
+ q = bdev->bd_queue;
+ dma_align = (queue_dma_alignment(q) | q->dma_pad_mask) + 1;
+ cmd->cmd = (u8 *)round_up((uintptr_t)cmd->cmd, dma_align);
+ cmd->resp = (u8 *)round_up((uintptr_t)cmd->resp, dma_align);
+
+ INIT_LIST_HEAD(&opal_dev->node);
+ atomic_set(&opal_dev->in_use, 1);
+
+ opal_dev->state = 0;
+
+ return opal_dev;
+
+err_free_dev:
+ kfree(opal_dev);
+ return ERR_PTR(ret);
+}
+
+int opal_register(struct block_device *bdev, struct opal_key *key_cmd,
+ const opal_step *funcs, void *sbmt_data,
+ sed_sec_submit *submit_fn)
+{
+ struct opal_dev *new_dev = NULL;
+ u8 key_len = key_cmd->key_len;
+ u8 lr = key_cmd->lr;
+ int ret;
+
+ new_dev = alloc_opal_dev(bdev, lr);
+ if (IS_ERR(new_dev)) {
+ pr_err("%s: Error registering device: allocation\n",
+ bdev->bd_disk->disk_name);
+ return PTR_ERR(new_dev);
+ }
+
+ if (!memcpy(new_dev->key_name, key_cmd->key, key_len)) {
+ pr_err("%s: Error registering key: couldn't copy key\n",
+ new_dev->disk_name);
+ return -EFAULT;
+ }
+
+ new_dev->key_name_len = key_len;
+ new_dev->key_type = key_cmd->key_type;
+ ret = get_opal_key(new_dev);
+ if (ret) {
+ pr_err("%s: Couldn't get key: %d\n", new_dev->disk_name, ret);
+ return ret;
+ }
+
+ new_dev->funcs = funcs;
+ new_dev->submit_data = sbmt_data;
+ new_dev->submit_fn = submit_fn;
+
+ new_dev->state = 0;
+ return next(new_dev);
+}
+
+static struct opal_dev *get_registered_opal_dev(dev_t majmin, u8 lr)
+{
+ struct opal_dev *iter, *dev = NULL;
+ unsigned long flags;
+ bool in_use = false;
+
+ spin_lock_irqsave(&list_spinlock, flags);
+ list_for_each_entry(iter, &opal_list, node) {
+ if (MAJOR(iter->majmin) != MAJOR(majmin) ||
+ MINOR(iter->majmin) != MINOR(majmin))
+ continue;
+ if (iter->lr == lr) {
+ dev = iter;
+ if (!atomic_add_unless(&iter->in_use, 1, 1)) {
+ dev = NULL;
+ in_use = true;
+ }
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&list_spinlock, flags);
+
+ if (!dev)
+ return NULL;
+
+ return dev;
+}
+
+/* Free up the Opal dev and its keys during two scenarios:
+ *
+ * 1) When a command is complete that no longer requires
+ * the opal dev to be around.
+ * 2) When a command, including Opal Save fails we clean
+ * and free the opal dev.
+ *
+ * If we find the opal dev structure in the list of
+ * saved passwords we will *not* remove it.
+ */
+static void remove_and_clean_opal_dev(struct opal_dev *dev)
+{
+ struct opal_dev *iter;
+ bool found = false;
+
+ atomic_dec(&dev->in_use);
+ spin_lock(&list_spinlock);
+ list_for_each_entry(iter, &opal_list, node) {
+ if (iter == dev) {
+ found = true;
+ break;
+ }
+ }
+
+ spin_unlock(&list_spinlock);
+ if (!found) {
+ clean_opal_key(dev);
+ clean_function_data(dev);
+ kfree(dev);
+ }
+}
+
+static struct opal_dev *get_or_create_opal_dev(struct block_device *bdev,
+ u8 lr, bool use_new)
+{
+ struct opal_dev *dev = NULL;
+
+ if (!use_new)
+ dev = get_registered_opal_dev(bdev->bd_dev, lr);
+
+ if (!dev)
+ dev = alloc_opal_dev(bdev, lr);
+
+ return dev;
+}
+
+static int setup_opal_dev(struct block_device *bdev, struct opal_dev *dev,
+ const opal_step *funcs, struct opal_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ int ret;
+
+ dev->state = 0;
+ dev->funcs = funcs;
+ dev->TSN = 0;
+ dev->HSN = 0;
+ dev->lr = key->lr;
+ dev->error_cb = end_opal_session_error;
+ dev->error_cb_data = dev;
+ dev->submit_fn = submit_fn;
+ dev->submit_data = sbmt_data;
+
+ if (key) {
+ memcpy(dev->key_name, key->key, key->key_len);
+ dev->key_name_len = key->key_len;
+ dev->key_type = key->key_type;
+
+ ret = get_opal_key(dev);
+ if (ret) {
+ pr_err("%s: Couldn't get key: %d\n",
+ dev->disk_name, ret);
+ return ret;
+ }
+ }
+ dev->func_data = NULL;
+ return 0;
+}
+
+int opal_secure_erase_locking_range(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ struct opal_dev *dev;
+ void *data[3] = { NULL };
+ const opal_step erase_funcs[] = {
+ opal_discovery0,
+ start_auth_opal_session,
+ get_active_key,
+ gen_key,
+ end_opal_session,
+ NULL,
+ };
+ int ret;
+
+ dev = get_or_create_opal_dev(bdev, key->opal_act.key.lr, true);
+ if (!dev)
+ return -ENOMEM;
+
+ ret = setup_opal_dev(bdev, dev, erase_funcs, &key->opal_act.key,
+ sbmt_data, submit_fn);
+ dev->func_data = data;
+ dev->func_data[1] = &key->opal_act.who;
+ if (ret)
+ goto error_return;
+
+ ret = next(dev);
+
+ error_return:
+ remove_and_clean_opal_dev(dev);
+ return ret;
+}
+EXPORT_SYMBOL(opal_secure_erase_locking_range);
+
+int opal_erase_locking_range(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ struct opal_dev *dev;
+ const opal_step erase_funcs[] = {
+ opal_discovery0,
+ start_auth_opal_session,
+ erase_locking_range,
+ end_opal_session,
+ NULL,
+ };
+ int ret;
+
+ dev = get_or_create_opal_dev(bdev, key->opal_lrs.key.lr, true);
+ if (!dev)
+ return -ENOMEM;
+
+ ret = setup_opal_dev(bdev, dev, erase_funcs, &key->opal_lrs.key,
+ sbmt_data, submit_fn);
+ if (ret)
+ goto error_return;
+
+ ret = next(dev);
+
+ error_return:
+ remove_and_clean_opal_dev(dev);
+ return ret;
+}
+EXPORT_SYMBOL(opal_erase_locking_range);
+
+int opal_enable_disable_shadow_mbr(struct block_device *bdev,
+ struct sed_key *key, void *sbmt_data,
+ sed_sec_submit *submit_fn)
+{
+ void *func_data[6] = { NULL };
+ struct opal_dev *dev;
+ const opal_step mbr_funcs[] = {
+ opal_discovery0,
+ start_admin1LSP_opal_session,
+ set_mbr_done,
+ end_opal_session,
+ start_admin1LSP_opal_session,
+ set_mbr_enable_disable,
+ end_opal_session,
+ NULL,
+ };
+ int ret;
+
+ if (key->opal_mbr.enable_disable != OPAL_MBR_ENABLE &&
+ key->opal_mbr.enable_disable != OPAL_MBR_DISABLE)
+ return -EINVAL;
+
+ dev = get_or_create_opal_dev(bdev, key->opal_mbr.key.lr, true);
+ if (!dev)
+ return -ENOMEM;
+
+ ret = setup_opal_dev(bdev, dev, mbr_funcs, &key->opal_mbr.key,
+ sbmt_data, submit_fn);
+ if (ret)
+ goto error_return;
+
+ dev->num_func_data = 6;
+ dev->func_data = func_data;
+ dev->func_data[2] = &key->opal_mbr.enable_disable;
+ dev->func_data[5] = &key->opal_mbr.enable_disable;
+
+ ret = next(dev);
+
+ error_return:
+ remove_and_clean_opal_dev(dev);
+ return ret;
+
+}
+EXPORT_SYMBOL(opal_enable_disable_shadow_mbr);
+
+int opal_save(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ void *func_data[3] = { NULL };
+ struct opal_dev *dev;
+ const opal_step _auth_funcs[] = {
+ opal_discovery0,
+ start_auth_opal_session,
+ query_locking_range,
+ end_opal_session,
+ opal_register_cont,
+ NULL
+ };
+ int ret;
+
+ dev = get_or_create_opal_dev(bdev, key->opal_lk_unlk.key.lr, false);
+ if (!dev)
+ return -ENOMEM;
+ ret = setup_opal_dev(bdev, dev, _auth_funcs, &key->opal_lk_unlk.key,
+ sbmt_data, submit_fn);
+ if (ret)
+ goto error_return;
+
+ dev->num_func_data = 3;
+ dev->func_data = func_data;
+ dev->func_data[1] = &key->opal_lk_unlk.authority;
+ dev->lkul = key->opal_lk_unlk;
+
+ ret = next(dev);
+
+ error_return:
+ remove_and_clean_opal_dev(dev);
+ return ret;
+}
+EXPORT_SYMBOL(opal_save);
+
+int opal_add_user_to_lr(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ void *func_data[3] = { NULL };
+ struct opal_dev *dev;
+ const opal_step funcs[] = {
+ opal_discovery0,
+ start_admin1LSP_opal_session,
+ add_user_to_lr,
+ end_opal_session,
+ NULL
+ };
+ int ret;
+
+ if (!bdev || !bdev->bd_disk) {
+ pr_err("Can't assign user to LR without backing disk\n");
+ return -EFAULT;
+ }
+ if (key->opal_lk_unlk.l_state != OPAL_RO &&
+ key->opal_lk_unlk.l_state != OPAL_RW) {
+ pr_err("Locking state was not RO or RW\n");
+ return -EINVAL;
+ }
+ if (key->opal_lk_unlk.authority.who < OPAL_USER1 &&
+ key->opal_lk_unlk.authority.who > OPAL_USER9) {
+ pr_err("Authority was not within the range of users: %d\n",
+ key->opal_lk_unlk.authority.who);
+ return -EINVAL;
+ }
+ if (key->opal_lk_unlk.authority.SUM) {
+ pr_err("%s not supported in SUM. Use setup locking range\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ dev = get_or_create_opal_dev(bdev, key->opal_lk_unlk.key.lr, true);
+ if (!dev)
+ return -ENOMEM;
+ ret = setup_opal_dev(bdev, dev, funcs, &key->opal_lk_unlk.key,
+ sbmt_data, submit_fn);
+ if (ret)
+ goto error_return;
+
+ dev->num_func_data = 3;
+ dev->func_data = func_data;
+ dev->func_data[2] = &key->opal_lk_unlk;
+
+ ret = next(dev);
+
+ error_return:
+ remove_and_clean_opal_dev(dev);
+ return ret;
+
+}
+EXPORT_SYMBOL(opal_add_user_to_lr);
+
+int opal_reverttper(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ const opal_step revert_funcs[] = {
+ opal_discovery0,
+ start_SIDASP_opal_session,
+ revert_tper, /* controller will terminate session */
+ NULL,
+ };
+
+ return opal_register(bdev, &key->opal, revert_funcs,
+ sbmt_data, submit_fn);
+}
+EXPORT_SYMBOL(opal_reverttper);
+
+/* These are global'd because both lock_unlock_internal
+ * and opal_unlock_from_suspend need them.
+ */
+const opal_step ulk_funcs_SUM[] = {
+ opal_discovery0,
+ start_auth_opal_session,
+ lock_unlock_locking_range_SUM,
+ end_opal_session,
+ NULL
+};
+const opal_step _unlock_funcs[] = {
+ opal_discovery0,
+ start_auth_opal_session,
+ lock_unlock_locking_range,
+ end_opal_session,
+ NULL
+};
+int opal_lock_unlock(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ void *func_data[3] = { NULL };
+ struct opal_dev *dev;
+ int ret;
+
+ if (key->opal_lk_unlk.authority.who < OPAL_ADMIN1 ||
+ key->opal_lk_unlk.authority.who > OPAL_USER9)
+ return -EINVAL;
+
+ dev = get_or_create_opal_dev(bdev, key->opal_lk_unlk.key.lr, true);
+ if (!dev)
+ return -ENOMEM;
+
+ if (key->opal_lk_unlk.authority.SUM)
+ ret = setup_opal_dev(bdev, dev, ulk_funcs_SUM,
+ &key->opal_lk_unlk.key,
+ sbmt_data, submit_fn);
+ else
+ ret = setup_opal_dev(bdev, dev, _unlock_funcs,
+ &key->opal_lk_unlk.key,
+ sbmt_data, submit_fn);
+ if (ret)
+ goto error_return;
+
+ dev->num_func_data = 3;
+ dev->func_data = func_data;
+ dev->func_data[1] = &key->opal_lk_unlk.authority;
+ dev->func_data[2] = &key->opal_lk_unlk;
+
+ ret = next(dev);
+
+ error_return:
+ remove_and_clean_opal_dev(dev);
+ return ret;
+}
+EXPORT_SYMBOL(opal_lock_unlock);
+
+int opal_take_ownership(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ const opal_step owner_funcs[] = {
+ opal_discovery0,
+ start_anybodyASP_opal_session,
+ get_msid_cpin_pin,
+ end_opal_session,
+ start_SIDASP_opal_session,
+ set_sid_cpin_pin,
+ end_opal_session,
+ NULL
+ };
+
+ return opal_register(bdev, &key->opal, owner_funcs, sbmt_data,
+ submit_fn);
+}
+EXPORT_SYMBOL(opal_take_ownership);
+
+int opal_activate_lsp(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ const opal_step active_funcs[] = {
+ opal_discovery0,
+ start_SIDASP_opal_session, /* Open session as SID auth */
+ get_lsp_lifecycle,
+ activate_lsp,
+ end_opal_session,
+ NULL
+ };
+ struct opal_dev *dev;
+ int ret;
+
+ dev = get_or_create_opal_dev(bdev, key->opal.lr, true);
+ if (!dev)
+ return -ENOMEM;
+ ret = setup_opal_dev(bdev, dev, active_funcs, &key->opal,
+ sbmt_data, submit_fn);
+ if (ret)
+ goto error_return;
+
+ ret = next(dev);
+
+ error_return:
+ remove_and_clean_opal_dev(dev);
+ return ret;
+}
+EXPORT_SYMBOL(opal_activate_lsp);
+
+int opal_setup_locking_range(struct block_device *bdev, struct sed_key *pw,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ struct opal_dev *dev;
+ void *data[3] = { NULL };
+ const opal_step lr_funcs[] = {
+ opal_discovery0,
+ start_auth_opal_session,
+ setup_locking_range,
+ end_opal_session,
+ NULL,
+ };
+ int ret;
+
+ dev = get_or_create_opal_dev(bdev, pw->opal_lrs.key.lr, true);
+ if (!dev)
+ return -ENOMEM;
+
+ ret = setup_opal_dev(bdev, dev, lr_funcs, &pw->opal_lrs.key,
+ sbmt_data, submit_fn);
+ if (ret)
+ goto error_return;
+
+ dev->func_data = data;
+ dev->num_func_data = 3;
+ dev->func_data[1] = &pw->opal_lrs.who;
+ dev->func_data[2] = &pw->opal_lrs;
+
+ ret = next(dev);
+
+ error_return:
+ remove_and_clean_opal_dev(dev);
+ return ret;
+}
+EXPORT_SYMBOL(opal_setup_locking_range);
+
+int opal_set_new_pw(struct block_device *bdev, struct sed_key *pw,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ const opal_step pw_funcs[] = {
+ opal_discovery0,
+ start_auth_opal_session,
+ set_new_pw,
+ end_opal_session,
+ NULL
+ };
+ struct opal_dev *dev;
+ void *data[3] = { NULL };
+ int ret;
+
+ if (pw->sed_type != OPAL_PW)
+ return -EINVAL;
+
+ if (pw->opal_pw.who.who < OPAL_ADMIN1 ||
+ pw->opal_pw.who.who > OPAL_USER9)
+ return -EINVAL;
+
+ dev = get_or_create_opal_dev(bdev, pw->opal_pw.current_pin.lr, true);
+ if (!dev)
+ return -ENOMEM;
+
+ ret = setup_opal_dev(bdev, dev, pw_funcs,
+ &pw->opal_pw.current_pin,
+ sbmt_data, submit_fn);
+ if (ret)
+ goto error_return;
+
+ dev->num_func_data = 3;
+ dev->func_data = data;
+ dev->func_data[1] = (void *) &pw->opal_pw.who;
+ dev->func_data[2] = (void *) &pw->opal_pw;
+
+ ret = next(dev);
+
+ error_return:
+ remove_and_clean_opal_dev(dev);
+ return ret;
+}
+EXPORT_SYMBOL(opal_set_new_pw);
+
+int opal_activate_user(struct block_device *bdev, struct sed_key *pw,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ const opal_step act_funcs[] = {
+ opal_discovery0,
+ start_admin1LSP_opal_session,
+ internal_activate_user,
+ end_opal_session,
+ NULL
+ };
+ struct opal_dev *dev;
+ void *data[3] = { NULL };
+ int ret;
+
+ if (pw->sed_type != OPAL_ACT_USR) {
+ pr_err("Sed type was not act user\n");
+ return -EINVAL;
+ }
+
+ /* We can't activate Admin1 it's active as manufactured */
+ if (pw->opal_act.who.who < OPAL_USER1 &&
+ pw->opal_act.who.who > OPAL_USER9) {
+ pr_err("Who was not a valid user: %d \n", pw->opal_act.who.who);
+ return -EINVAL;
+ }
+
+ dev = get_or_create_opal_dev(bdev, pw->opal_act.key.lr, true);
+ if (!dev)
+ return -ENOMEM;
+
+ ret = setup_opal_dev(bdev, dev, act_funcs, &pw->opal_act.key,
+ sbmt_data, submit_fn);
+ if (ret)
+ goto error_return;
+
+ dev->num_func_data = 3;
+ dev->func_data = data;
+ dev->func_data[1] = &pw->opal_act;
+ dev->func_data[2] = &pw->opal_act;
+
+ ret = next(dev);
+
+ error_return:
+ remove_and_clean_opal_dev(dev);
+ return ret;
+
+}
+EXPORT_SYMBOL(opal_activate_user);
+
+int opal_unlock_from_suspend(struct opal_suspend_unlk *data)
+{
+ int majmin = data->dev;
+ struct opal_dev *iter, *dev = NULL;
+ void *func_data[3] = { NULL };
+ u8 count = 0;
+ struct opal_dev *todo[64] = { NULL };
+ int ret = 0;
+ bool was_failure = false;
+
+ spin_lock(&list_spinlock);
+ list_for_each_entry(iter, &opal_list, node) {
+ if (MAJOR(iter->majmin) != MAJOR(majmin) ||
+ MINOR(iter->majmin) != MINOR(majmin))
+ continue;
+
+ if (atomic_add_unless(&iter->in_use, 1, 1)) {
+ if (count < 64)
+ todo[count++] = iter;
+ else
+ break;
+ }
+ }
+ spin_unlock(&list_spinlock);
+
+ while (count) {
+ dev = todo[--count];
+ dev->func_data = func_data;
+ dev->resume_from_suspend = true;
+ dev->resume_data = data;
+ dev->error_cb = end_opal_session_error;
+ dev->error_cb_data = dev;
+ dev->state = 0;
+ if (dev->lkul.authority.SUM)
+ dev->funcs = ulk_funcs_SUM;
+ else
+ dev->funcs = _unlock_funcs;
+ dev->TSN = 0;
+ dev->HSN = 0;
+ dev->func_data[2] = &dev->lkul;
+ dev->func_data[1] = &dev->lkul.authority;
+ ret = next(dev);
+ if (ret)
+ was_failure = true;
+ unlock_suspend_final(dev);
+ }
+ return was_failure ? 1 : 0;
+}
+EXPORT_SYMBOL(opal_unlock_from_suspend);
diff --git a/block/sed-opal_internal.h b/block/sed-opal_internal.h
new file mode 100644
index 0000000..12369eb
--- /dev/null
+++ b/block/sed-opal_internal.h
@@ -0,0 +1,601 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Authors:
+ * Rafael Antognolli <rafael.antognolli at intel.com>
+ * Scott Bauer <scott.bauer at intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _NVME_OPAL_INTERNAL_H
+#define _NVME_OPAL_INTERNAL_H
+
+#include <linux/key-type.h>
+#include <keys/user-type.h>
+
+#define DTAERROR_NO_METHOD_STATUS 0x89
+#define GENERIC_HOST_SESSION_NUM 0x41
+
+
+
+/*
+ * Derived from:
+ * TCG_Storage_Architecture_Core_Spec_v2.01_r1.00
+ * Section: 5.1.5 Method Status Codes
+ */
+static const char *opal_errors[] = {
+ "Success",
+ "Not Authorized",
+ "Unknown Error",
+ "SP Busy",
+ "SP Failed",
+ "SP Disabled",
+ "SP Frozen",
+ "No Sessions Available",
+ "Uniqueness Conflict",
+ "Insufficient Space",
+ "Insufficient Rows",
+ "Invalid Function",
+ "Invalid Parameter",
+ "Invalid Reference",
+ "Unknown Error",
+ "TPER Malfunction",
+ "Transaction Failure",
+ "Response Overflow",
+ "Authority Locked Out",
+};
+
+static const char *opal_error_to_human(int error)
+{
+ if (error == 0x3f)
+ return "Failed";
+
+ if (error >= ARRAY_SIZE(opal_errors) || error < 0)
+ return "Unknown Error";
+
+ return opal_errors[error];
+}
+
+/*
+ * User IDs used in the TCG storage SSCs
+ * Derived from: TCG_Storage_Architecture_Core_Spec_v2.01_r1.00
+ * Section: 6.3 Assigned UIDs
+ */
+static const u8 OPALUID[][8] = {
+ /* users */
+
+ /* session management */
+ { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff},
+ /* special "thisSP" syntax */
+ { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 },
+ /* Administrative SP */
+ { 0x00, 0x00, 0x02, 0x05, 0x00, 0x00, 0x00, 0x01 },
+ /* Locking SP */
+ { 0x00, 0x00, 0x02, 0x05, 0x00, 0x00, 0x00, 0x02 },
+ /* ENTERPRISE Locking SP */
+ { 0x00, 0x00, 0x02, 0x05, 0x00, 0x01, 0x00, 0x01 },
+ /* anybody */
+ { 0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x00, 0x01 },
+ /* SID */
+ { 0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x00, 0x06 },
+ /* ADMIN1 */
+ { 0x00, 0x00, 0x00, 0x09, 0x00, 0x01, 0x00, 0x01 },
+ /* USER1 */
+ { 0x00, 0x00, 0x00, 0x09, 0x00, 0x03, 0x00, 0x01 },
+ /* USER2 */
+ { 0x00, 0x00, 0x00, 0x09, 0x00, 0x03, 0x00, 0x02 },
+ /* PSID user */
+ { 0x00, 0x00, 0x00, 0x09, 0x00, 0x01, 0xff, 0x01 },
+ /* BandMaster 0 */
+ { 0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x80, 0x01 },
+ /* EraseMaster */
+ { 0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x84, 0x01 },
+
+ /* tables */
+
+ /* Locking_GlobalRange */
+ { 0x00, 0x00, 0x08, 0x02, 0x00, 0x00, 0x00, 0x01 },
+ /* ACE_Locking_Range_Set_RdLocked UID */
+ { 0x00, 0x00, 0x00, 0x08, 0x00, 0x03, 0xE0, 0x01 },
+ /* ACE_Locking_Range_Set_WrLocked UID */
+ { 0x00, 0x00, 0x00, 0x08, 0x00, 0x03, 0xE8, 0x01 },
+ /* MBR Control */
+ { 0x00, 0x00, 0x08, 0x03, 0x00, 0x00, 0x00, 0x01 },
+ /* Shadow MBR */
+ { 0x00, 0x00, 0x08, 0x04, 0x00, 0x00, 0x00, 0x00 },
+ /* AUTHORITY_TABLE */
+ { 0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x00, 0x00},
+ /* C_PIN_TABLE */
+ { 0x00, 0x00, 0x00, 0x0B, 0x00, 0x00, 0x00, 0x00},
+ /* OPAL Locking Info */
+ { 0x00, 0x00, 0x08, 0x01, 0x00, 0x00, 0x00, 0x01 },
+ /* Enterprise Locking Info */
+ { 0x00, 0x00, 0x08, 0x01, 0x00, 0x00, 0x00, 0x00 },
+
+ /* C_PIN_TABLE object ID's */
+
+ /* C_PIN_MSID */
+ { 0x00, 0x00, 0x00, 0x0B, 0x00, 0x00, 0x84, 0x02},
+ /* C_PIN_SID */
+ { 0x00, 0x00, 0x00, 0x0B, 0x00, 0x00, 0x00, 0x01},
+ /* C_PIN_ADMIN1 */
+ { 0x00, 0x00, 0x00, 0x0B, 0x00, 0x01, 0x00, 0x01},
+
+ /* half UID's (only first 4 bytes used) */
+
+ /* Half-UID – Authority_object_ref */
+ { 0x00, 0x00, 0x0C, 0x05, 0xff, 0xff, 0xff, 0xff },
+ /* Half-UID – Boolean ACE */
+ { 0x00, 0x00, 0x04, 0x0E, 0xff, 0xff, 0xff, 0xff },
+
+ /* special value for omitted optional parameter */
+
+ /* HEXFF for omitted */
+ { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
+};
+static const size_t OPAL_UID_LENGTH = 8;
+static const size_t OPAL_MSID_KEYLEN = 15;
+static const size_t OPAL_UID_LENGTH_HALF = 4;
+
+
+/* Enum to index OPALUID array */
+enum OPAL_UID {
+ /* users */
+ OPAL_SMUID_UID,
+ OPAL_THISSP_UID,
+ OPAL_ADMINSP_UID,
+ OPAL_LOCKINGSP_UID,
+ OPAL_ENTERPRISE_LOCKINGSP_UID,
+ OPAL_ANYBODY_UID,
+ OPAL_SID_UID,
+ OPAL_ADMIN1_UID,
+ OPAL_USER1_UID,
+ OPAL_USER2_UID,
+ OPAL_PSID_UID,
+ OPAL_ENTERPRISE_BANDMASTER0_UID,
+ OPAL_ENTERPRISE_ERASEMASTER_UID,
+ /* tables */
+ OPAL_LOCKINGRANGE_GLOBAL,
+ OPAL_LOCKINGRANGE_ACE_RDLOCKED,
+ OPAL_LOCKINGRANGE_ACE_WRLOCKED,
+ OPAL_MBRCONTROL,
+ OPAL_MBR,
+ OPAL_AUTHORITY_TABLE,
+ OPAL_C_PIN_TABLE,
+ OPAL_LOCKING_INFO_TABLE,
+ OPAL_ENTERPRISE_LOCKING_INFO_TABLE,
+ /* C_PIN_TABLE object ID's */
+ OPAL_C_PIN_MSID,
+ OPAL_C_PIN_SID,
+ OPAL_C_PIN_ADMIN1,
+ /* half UID's (only first 4 bytes used) */
+ OPAL_HALF_UID_AUTHORITY_OBJ_REF,
+ OPAL_HALF_UID_BOOLEAN_ACE,
+ /* omitted optional parameter */
+ OPAL_UID_HEXFF,
+};
+
+/*
+ * TCG Storage SSC Methods.
+ * Derived from: TCG_Storage_Architecture_Core_Spec_v2.01_r1.00
+ * Section: 6.3 Assigned UIDs
+ */
+static const u8 OPALMETHOD[][8] = {
+ /* Properties */
+ { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x01 },
+ /* STARTSESSION */
+ { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x02 },
+ /* Revert */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x02, 0x02 },
+ /* Activate */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x02, 0x03 },
+ /* Enterprise Get */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06 },
+ /* Enterprise Set */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x07 },
+ /* NEXT */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x08 },
+ /* Enterprise Authenticate */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x0c },
+ /* GetACL */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x0d },
+ /* GenKey */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x10 },
+ /* revertSP */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x11 },
+ /* Get */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x16 },
+ /* Set */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x17 },
+ /* Authenticate */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x1c },
+ /* Random */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x01 },
+ /* Erase */
+ { 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x08, 0x03 },
+};
+static const size_t OPAL_METHOD_LENGTH = 8;
+
+/* Enum for indexing the OPALMETHOD array */
+enum OPAL_METHOD {
+ OPAL_PROPERTIES,
+ OPAL_STARTSESSION,
+ OPAL_REVERT,
+ OPAL_ACTIVATE,
+ OPAL_EGET,
+ OPAL_ESET,
+ OPAL_NEXT,
+ OPAL_EAUTHENTICATE,
+ OPAL_GETACL,
+ OPAL_GENKEY,
+ OPAL_REVERTSP,
+ OPAL_GET,
+ OPAL_SET,
+ OPAL_AUTHENTICATE,
+ OPAL_RANDOM,
+ OPAL_ERASE,
+};
+
+/*
+ * Token defs derived from:
+ * TCG_Storage_Architecture_Core_Spec_v2.01_r1.00
+ * 3.2.2 Data Stream Encoding
+ */
+enum OPAL_RESPONSE_TOKEN {
+ OPAL_DTA_TOKENID_BYTESTRING = 0xe0,
+ OPAL_DTA_TOKENID_SINT = 0xe1,
+ OPAL_DTA_TOKENID_UINT = 0xe2,
+ OPAL_DTA_TOKENID_TOKEN = 0xe3, /* actual token is returned */
+ OPAL_DTA_TOKENID_INVALID = 0X0
+};
+
+enum OPAL_TOKEN {
+ /* Boolean */
+ OPAL_TRUE = 0x01,
+ OPAL_FALSE = 0x00,
+ OPAL_BOOLEAN_EXPR = 0x03,
+ /* cellblocks */
+ OPAL_TABLE = 0x00,
+ OPAL_STARTROW = 0x01,
+ OPAL_ENDROW = 0x02,
+ OPAL_STARTCOLUMN = 0x03,
+ OPAL_ENDCOLUMN = 0x04,
+ OPAL_VALUES = 0x01,
+ /* authority table */
+ OPAL_PIN = 0x03,
+ /* locking tokens */
+ OPAL_RANGESTART = 0x03,
+ OPAL_RANGELENGTH = 0x04,
+ OPAL_READLOCKENABLED = 0x05,
+ OPAL_WRITELOCKENABLED = 0x06,
+ OPAL_READLOCKED = 0x07,
+ OPAL_WRITELOCKED = 0x08,
+ OPAL_ACTIVEKEY = 0x0A,
+ /* locking info table */
+ OPAL_MAXRANGES = 0x04,
+ /* mbr control */
+ OPAL_MBRENABLE = 0x01,
+ OPAL_MBRDONE = 0x02,
+ /* properties */
+ OPAL_HOSTPROPERTIES = 0x00,
+ /* atoms */
+ OPAL_STARTLIST = 0xf0,
+ OPAL_ENDLIST = 0xf1,
+ OPAL_STARTNAME = 0xf2,
+ OPAL_ENDNAME = 0xf3,
+ OPAL_CALL = 0xf8,
+ OPAL_ENDOFDATA = 0xf9,
+ OPAL_ENDOFSESSION = 0xfa,
+ OPAL_STARTTRANSACTON = 0xfb,
+ OPAL_ENDTRANSACTON = 0xfC,
+ OPAL_EMPTYATOM = 0xff,
+ OPAL_WHERE = 0x00,
+};
+
+/* Useful tiny atoms.
+ * Useful for table columns etc
+ */
+enum OPAL_TINY_ATOM {
+ OPAL_TINY_UINT_00 = 0x00,
+ OPAL_TINY_UINT_01 = 0x01,
+ OPAL_TINY_UINT_02 = 0x02,
+ OPAL_TINY_UINT_03 = 0x03,
+ OPAL_TINY_UINT_04 = 0x04,
+ OPAL_TINY_UINT_05 = 0x05,
+ OPAL_TINY_UINT_06 = 0x06,
+ OPAL_TINY_UINT_07 = 0x07,
+ OPAL_TINY_UINT_08 = 0x08,
+ OPAL_TINY_UINT_09 = 0x09,
+ OPAL_TINY_UINT_10 = 0x0a,
+ OPAL_TINY_UINT_11 = 0x0b,
+ OPAL_TINY_UINT_12 = 0x0c,
+ OPAL_TINY_UINT_13 = 0x0d,
+ OPAL_TINY_UINT_14 = 0x0e,
+ OPAL_TINY_UINT_15 = 0x0f,
+};
+
+enum OPAL_ATOM_WIDTH {
+ OPAL_WIDTH_TINY,
+ OPAL_WIDTH_SHORT,
+ OPAL_WIDTH_MEDIUM,
+ OPAL_WIDTH_LONG,
+ OPAL_WIDTH_TOKEN
+};
+
+/* Locking state for a locking range */
+enum OPAL_LOCKINGSTATE {
+ OPAL_LOCKING_READWRITE = 0x01,
+ OPAL_LOCKING_READONLY = 0x02,
+ OPAL_LOCKING_LOCKED = 0x03,
+};
+
+/*
+ * Structures to build and decode the Opal SSC messages
+ * fields that are NOT really numeric are defined as u8[] to
+ * help reduce the endianness issues
+ */
+
+/* Packets derived from:
+ * TCG_Storage_Architecture_Core_Spec_v2.01_r1.00
+ * Secion: 3.2.3 ComPackets, Packets & Subpackets
+ */
+
+/* Comm Packet (header) for transmissions. */
+struct opal_compacket {
+ u32 reserved0;
+ u8 extendedComID[4];
+ u32 outstandingData;
+ u32 minTransfer;
+ u32 length;
+};
+
+/* Packet structure. */
+struct opal_packet {
+ u32 TSN;
+ u32 HSN;
+ u32 seq_number;
+ u16 reserved0;
+ u16 ack_type;
+ u32 acknowledgment;
+ u32 length;
+};
+
+/* Data sub packet header */
+struct opal_data_subpacket {
+ u8 reserved0[6];
+ u16 kind;
+ u32 length;
+};
+
+/* header of a response */
+struct opal_header {
+ struct opal_compacket cp;
+ struct opal_packet pkt;
+ struct opal_data_subpacket subpkt;
+};
+
+#define FC_TPER 0x0001
+#define FC_LOCKING 0x0002
+#define FC_GEOMETRY 0x0003
+#define FC_ENTERPRISE 0x0100
+#define FC_DATASTORE 0x0202
+#define FC_SINGLEUSER 0x0201
+#define FC_OPALV100 0x0200
+#define FC_OPALV200 0x0203
+
+/*
+ * The Discovery 0 Header. As defined in
+ * Opal SSC Documentation
+ * Section: 3.3.5 Capability Discovery
+ */
+struct d0_header {
+ u32 length; /* the length of the header 48 in 2.00.100 */
+ u32 revision; /**< revision of the header 1 in 2.00.100 */
+ u32 reserved01;
+ u32 reserved02;
+ /*
+ * the remainder of the structure is vendor specific and will not be
+ * addressed now
+ */
+ u8 ignored[32];
+};
+
+/*
+ * TPer Feature Descriptor. Contains flags indicating support for the
+ * TPer features described in the OPAL specification. The names match the
+ * OPAL terminology
+ *
+ * code == 0x001 in 2.00.100
+ */
+struct d0_tper_features {
+ /*
+ * supported_features bits:
+ * bit 7: reserved
+ * bit 6: com ID management
+ * bit 5: reserved
+ * bit 4: streaming support
+ * bit 3: buffer management
+ * bit 2: ACK/NACK
+ * bit 1: async
+ * bit 0: sync
+ */
+ u8 supported_features;
+ /*
+ * bytes 5 through 15 are reserved, but we represent the first 3 as
+ * u8 to keep the other two 32bits integers aligned.
+ */
+ u8 reserved01[3];
+ u32 reserved02;
+ u32 reserved03;
+};
+
+/*
+ * Locking Feature Descriptor. Contains flags indicating support for the
+ * locking features described in the OPAL specification. The names match the
+ * OPAL terminology
+ *
+ * code == 0x0002 in 2.00.100
+ */
+struct d0_locking_features {
+ /*
+ * supported_features bits:
+ * bits 6-7: reserved
+ * bit 5: MBR done
+ * bit 4: MBR enabled
+ * bit 3: media encryption
+ * bit 2: locked
+ * bit 1: locking enabled
+ * bit 0: locking supported
+ */
+ u8 supported_features;
+ /*
+ * bytes 5 through 15 are reserved, but we represent the first 3 as
+ * u8 to keep the other two 32bits integers aligned.
+ */
+ u8 reserved01[3];
+ u32 reserved02;
+ u32 reserved03;
+};
+
+/*
+ * Geometry Feature Descriptor. Contains flags indicating support for the
+ * geometry features described in the OPAL specification. The names match the
+ * OPAL terminology
+ *
+ * code == 0x0003 in 2.00.100
+ */
+struct d0_geometry_features {
+ /*
+ * skip 32 bits from header, needed to align the struct to 64 bits.
+ */
+ u8 header[4];
+ /*
+ * reserved01:
+ * bits 1-6: reserved
+ * bit 0: align
+ */
+ u8 reserved01;
+ u8 reserved02[7];
+ u32 logical_block_size;
+ u64 alignment_granularity;
+ u64 lowest_aligned_lba;
+};
+
+/*
+ * Enterprise SSC Feature
+ *
+ * code == 0x0100
+ */
+struct d0_enterprise_ssc {
+ u16 baseComID;
+ u16 numComIDs;
+ /* range_crossing:
+ * bits 1-6: reserved
+ * bit 0: range crossing
+ */
+ u8 range_crossing;
+ u8 reserved01;
+ u16 reserved02;
+ u32 reserved03;
+ u32 reserved04;
+};
+
+/*
+ * Opal V1 feature
+ *
+ * code == 0x0200
+ */
+struct d0_opal_v100 {
+ u16 baseComID;
+ u16 numComIDs;
+};
+
+/*
+ * Single User Mode feature
+ *
+ * code == 0x0201
+ */
+struct d0_single_user_mode {
+ u32 num_locking_objects;
+ /* reserved01:
+ * bit 0: any
+ * bit 1: all
+ * bit 2: policy
+ * bits 3-7: reserved
+ */
+ u8 reserved01;
+ u8 reserved02;
+ u16 reserved03;
+ u32 reserved04;
+};
+
+/*
+ * Additonal Datastores feature
+ *
+ * code == 0x0202
+ */
+struct d0_datastore_table {
+ u16 reserved01;
+ u16 max_tables;
+ u32 max_size_tables;
+ u32 table_size_alignment;
+};
+
+/*
+ * OPAL 2.0 feature
+ *
+ * code == 0x0203
+ */
+struct d0_opal_v200 {
+ u16 baseComID;
+ u16 numComIDs;
+ /* range_crossing:
+ * bits 1-6: reserved
+ * bit 0: range crossing
+ */
+ u8 range_crossing;
+ /* num_locking_admin_auth:
+ * not aligned to 16 bits, so use two u8.
+ * stored in big endian:
+ * 0: MSB
+ * 1: LSB
+ */
+ u8 num_locking_admin_auth[2];
+ /* num_locking_user_auth:
+ * not aligned to 16 bits, so use two u8.
+ * stored in big endian:
+ * 0: MSB
+ * 1: LSB
+ */
+ u8 num_locking_user_auth[2];
+ u8 initialPIN;
+ u8 revertedPIN;
+ u8 reserved01;
+ u32 reserved02;
+};
+
+/* Union of features used to parse the discovery 0 response */
+struct d0_features {
+ u16 code;
+ /*
+ * r_version bits:
+ * bits 4-7: version
+ * bits 0-3: reserved
+ */
+ u8 r_version;
+ u8 length;
+ u8 features[];
+};
+
+struct key *request_user_key(const char *master_desc, const u8 **master_key,
+ size_t *master_keylen);
+
+#endif /* _NVME_OPAL_INTERNAL_H */
diff --git a/block/sed.c b/block/sed.c
new file mode 100644
index 0000000..241b1dc
--- /dev/null
+++ b/block/sed.c
@@ -0,0 +1,207 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Authors:
+ * Rafael Antognolli <rafael.antognolli at intel.com>
+ * Scott Bauer <scott.bauer at intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/blkdev.h>
+#include <linux/sed.h>
+#include <linux/sed-opal.h>
+#include <asm/uaccess.h>
+
+
+int sed_save(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ switch (key->sed_type) {
+ case OPAL_LOCK_UNLOCK:
+ return opal_save(bdev, key, sbmt_data, submit_fn);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+int sed_lock_unlock(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ switch (key->sed_type) {
+ case OPAL_LOCK_UNLOCK:
+ return opal_lock_unlock(bdev, key, sbmt_data, submit_fn);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+int sed_take_ownership(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+
+ switch (key->sed_type) {
+ case OPAL:
+ return opal_take_ownership(bdev, key, sbmt_data, submit_fn);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+int sed_activate_lsp(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+
+ switch (key->sed_type) {
+ case OPAL:
+ return opal_activate_lsp(bdev, key, sbmt_data, submit_fn);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+int sed_set_pw(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+
+ switch (key->sed_type) {
+ case OPAL_PW:
+ return opal_set_new_pw(bdev, key, sbmt_data, submit_fn);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+int sed_activate_user(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+
+ switch (key->sed_type) {
+ case OPAL_ACT_USR:
+ return opal_activate_user(bdev, key, sbmt_data, submit_fn);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+int sed_reverttper(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+
+ switch (key->sed_type) {
+ case OPAL:
+ return opal_reverttper(bdev, key, sbmt_data, submit_fn);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+int sed_setup_locking_range(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+
+ switch (key->sed_type) {
+ case OPAL_LR_SETUP:
+ return opal_setup_locking_range(bdev, key, sbmt_data, submit_fn);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+int sed_adduser_to_lr(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+
+ switch (key->sed_type) {
+ case OPAL_LOCK_UNLOCK:
+ return opal_add_user_to_lr(bdev, key, sbmt_data, submit_fn);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+int sed_do_mbr(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+
+ switch (key->sed_type) {
+ case OPAL_MBR_DATA:
+ return opal_enable_disable_shadow_mbr(bdev, key, sbmt_data,
+ submit_fn);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+int sed_erase_lr(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+
+ switch (key->sed_type) {
+ case OPAL:
+ return opal_erase_locking_range(bdev, key, sbmt_data, submit_fn);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+int sed_secure_erase_lr(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn)
+{
+ switch (key->sed_type) {
+ case OPAL_ACT_USR:
+ return opal_secure_erase_locking_range(bdev, key,
+ sbmt_data, submit_fn);
+
+ }
+ return -EOPNOTSUPP;
+}
+
+
+#define CMD_TO_FN_INDX(cmd) \
+ (cmd) - IOC_SED_SAVE
+
+int (*sed_fn[])(struct block_device *bdev, struct sed_key *key,
+ void *sbmt_data, sed_sec_submit *submit_fn) =
+{
+ sed_save,
+ sed_lock_unlock,
+ sed_take_ownership,
+ sed_activate_lsp,
+ sed_set_pw,
+ sed_activate_user,
+ sed_reverttper,
+ sed_setup_locking_range,
+ sed_adduser_to_lr,
+ sed_do_mbr,
+ sed_erase_lr,
+ sed_secure_erase_lr
+};
+
+/* The sbmt_ctrl_data is a opaque pointer to some structure which will be used
+ * by the submit_fn to properly submit the opal command to the controller.
+ * The submit_fn must be a blocking call.
+ */
+int blkdev_sed_ioctl(struct block_device *bdev, fmode_t fmode, unsigned int cmd,
+ unsigned long arg, void *sbmt_ctrl_data,
+ sed_sec_submit *submit_fn)
+{
+ struct sed_key key;
+
+ /* Caller should do this but since we're going to use cmd as an index
+ * lets 'trust but verify'.
+ */
+ if (!is_sed_ioctl(cmd))
+ return -EINVAL;
+ if (copy_from_user(&key, (void __user *)arg, sizeof(key)))
+ return -EFAULT;
+ return sed_fn[CMD_TO_FN_INDX(cmd)](bdev, &key, sbmt_ctrl_data, submit_fn);
+}
+EXPORT_SYMBOL_GPL(blkdev_sed_ioctl);
--
2.7.4
More information about the Linux-nvme
mailing list